Advanced Gauging Technologies

Thickness & width measurement gauges

  • Home
  • Products
    • Laser Thickness Gauge AGT800XT
    • Non Contact Gamma Thickness Gauge AGT400
    • Strip Width & Centerline Measurement System, AGT Width
    • Plastic Sheet Extrusion Thickness Gauge
    • Contact Gauge Replacement AGT600 Industrial
    • Lab Thickness Sample Gauge AGT600 LAB
    • Thickness Gauge Upgrades
    • Parts Store
    • Pipe & Pole Wall Thickness Measuring System
    • S.P.C. & Reporting
    • Offline Data Analysis
    • Gamma, X-ray, Laser Gauge Comparison
  • Services
    • Isotope Source Recovery Services
    • Radiation Training
    • Service, Support, and Start Up
    • Troubleshooting Tips
    • Download Quick Support Program
  • Applications
  • Contact Us
    • Request Quote
  • (614) 873-6691

April 1, 2014 By Nick Hunkar

NONCONTACT STRIP-THICKNESS MEASUREMENT

Advanced Gauging Technologies, LLC, Plain City, OH, introduces the AGT800 laser thickness gauge—an online noncontact device equipped to measure any strip material 0.040 to 0.750 in. thick. The first production system, say company officials, went to a 96- by 0.750-in. Butech stretch leveler-CTL line that shipped in mid-September 2013.

The thickness gauge and its accompanying SPC reporting system is designed to measure the thickness of metal alloys and any other materials processed in coil, sheet or strip form. Two Keyence laser sensors mount above and below the strip; laser-triangulation technology provides quick, accurate and reliable thickness measurements.

SPC reports include a graphic representation of strip thickness over the coil length, with indications locating out-of-tolerance material; a defect-summary report describing each defect type and its respective location in the coil; and a system-setup report. Benefits include documented compliance with ISO 9002 and QS 9000 requirements, in addition to improved process control, increased productivity and scrap reduction.

 

Magazine Article

 

Filed Under: AGT800, Magazine Article

March 28, 2014 By Nick Hunkar

Mexico Starts Up AGT400

Senior Field Service Engineer, John Fearing, started up an AGT400 at Aguascalientes Steel Coil Center. This isotope thickness gauge, located on a 72” Sonada Slitter, will measure Hot Rolled, Cold Rolled, Galvanized and Pickled Steel with a thickness range of 0.4 to 6.0 mm. Aguascalientes is a sister company of Kentucky Steel Center, which already has three other AGT400 thickness gauges.

Filed Under: AGT400, Isotope Gauge, Mexico, Radiation, Sales & Marketing, Service, Staff

March 18, 2014 By Nick Hunkar

Testing and Measurement – Metal Center News March

Advanced Gauging Technologies LLC, Plain City, Ohio, offers a new noncontact laser thickness gauge that can measure any strip material ranging from 0.040 to 0.750 inch in thickness. There is no radioactive source and no federal or state licensing requirements.

The AGT800 Laser Thickness Measurement and S.P.C. Reporting System is designed for measuring metals and any other materials that are processed in coil, sheet or strip form. It uses the latest in laser triangulation technology and provides fast, accurate and reliable thickness measurements. Direct benefits include documented compliance with ISO9002 and QS9000, in addition to improved process control, increased productvity and scrap reduction, the company claims.

The AGT800 incorporates a similar user interface and has most of the same functionality as Advanced Gauging’s AGT400 Isotope Thickness Gauge. There are no special cooling or installation requirements. It is also supported by the company’s team of field technicians.

Filed Under: AGT800, Magazine Article

March 14, 2014 By Nick Hunkar

National Orders A Thickness Gauge

In Chicago, National Processing Company experienced a fire, but that did not stop them from upgrading an obsolete  Gamma 200 to an AGT400 on a 72” Pro-Eco Pickle Line. Fortunately, no one was injured during the mishap.

Filed Under: AGT400, Isotope Gauge, Radiation

March 12, 2014 By Nick Hunkar

Ohio Company Starts Up An AGT400

John Fearing performed a startup at Ferrous Metal Processing (Brooklyn, Ohio) on an AGT400 upgrade of a GR200 thickness gauge located on their 72” Stamco Slitter.

Filed Under: AGT400, Isotope Gauge, Radiation

  • « Previous Page
  • 1
  • …
  • 74
  • 75
  • 76
  • 77
  • 78
  • Next Page »
  • Request Quote
  • Troubleshooting Tips
  • Customer Info
  • Parts Store
  • Terms & Shipping
  • Accreditation & Licensing
  • Statistical Process Control
  • About Us
  • News & Info
  • Newsletters
  • Contact Us
  • Careers
  • Privacy & Usage

8430 Estates Court
Plain City, Ohio 43064
(614) 873-6691
Sales@AdvGauging.com

  • Facebook
  • Instagram
  • LinkedIn
  • Pinterest
  • YouTube
AIST, NIST
Copyright © 2025 · Advanced Gauging Technologies, L.L.C.
USNRC, CNSC, ODH