Measure virtually any material with the latest non-contact
laser thickness measurement technology.
The AGT600 Lab Thickness Sample Gauge is designed to be a simple and accurate measuring system. It is a perfect fit for QC departments, labs or shop floors where a quick and accurate thickness measurement is needed. Sampling with the AGT600 Lab eliminates the inconsistency problem of hand measuring with micrometers by different people.
A simple touch screen provides instant thickness and deviation information. Exceeding the entered target thickness values and limits will provide digital outputs that can be used for QC lights and a visible indication on the screen.
The AGT600 is a non-contact laser thickness gauge and has no sensitive mechanical parts. The system produces accurate and repeatable thickness measurements. Maintenance is as simple as keeping the sensor heads clean and occasional calibration check.
Contact us today to get an AGT600 in your plant
Our specifications below reflect real-world accuracy and performance not laboratory conditions specified by some other companies.
Our simplified hardware design combined with Keyence’s ultra high speed, high accuracy laser sensors make the AGT600™ the most reliable laser gauge in the industry.
The AGT600 can be setup on a desk or bench in minutes. For shop installation the gauge can be mounted in a number of ways using the T-slots in the frame. The touch screen can be mounted to the gauge, set on the desktop or mounted anywhere within 300 ft.
Our system features a fast and accurate calibration method, called ISOcal™ that establishes calibration over a range of samples and reports its calibration accuracy. Our calibration procedure uses N.I.S.T. certified and traceable aluminum samples.
The AGT600 has laser sensors above and below to provide true thickness measurement even with uneven or non-flat samples. A bent sample will give an inaccurate thickness measurement from single top reading gauges.
The N.I.S.T. traceable sample includes a set of six, 6061-T6-651 alloy aluminum — certified and traceable to N.I.S.T. standards.
The custom calibration sample holder includes a black anodized finish.
|AGT600™ Compact Laser Thickness Gauge|
|Material Thickness||25 µm to 25.3 mm|
(.001 to .999”)
|Air Gap||76 mm|
|Measurement Range||+/- 38 mm|
|Calibration Accuracy||< 10 µm|
|Resolution||< 1 µm (0.4 mil)|
|IEC/IFDA (CDRH) Laser Class||Class 2/Class II|
|Temperature Range||0 to 50° C|
(32 to 122° F)
|Relative Humidity Range||35 to 85%|