Generated by All in One SEO v4.9.10, this is an llms.txt file, used by LLMs to index the site.

# Advanced Gauging Technologies

Thickness & width measurement gauges

## Sitemaps

- [XML Sitemap](https://www.advgauging.com/sitemap.xml): Contains all public & indexable URLs for this website.

## Posts

- [News & Info](https://www.advgauging.com/blog/)
- [AGT400 Front Ends Shipped to PATEC](https://www.advgauging.com/agt400-front-ends-shipped-to-patec/) - AGT has completed the shipment of two AGT400 source and detector heads to PATEC Co. in South Korea. PATEC will be using these AGT400 front ends in a project with Wonilsa Co. to measure brass, bronze, and copper. Our source and detector heads will provide industry-leading accuracy for this project, increasing productivity, quality, and safety.
- [Feralloy Purchases AGT800XT and Width Gauge](https://www.advgauging.com/feralloy-purchases-agt800xt-and-width-gauge/) - Feralloy Corporation of Ghent, Kentucky has recently purchased an AGT800XT and Width Gauge add-on for their Butech CTL line. These gauges will be measuring HR, PO, and GV once started up, and will measure a thickness range of 0.035-1.000". Both gauges will be able to communicate with their PLC, providing both digital and analog outputs
- [Two AGT400s Started up at CSI](https://www.advgauging.com/two-agt400s-started-up-at-csi/) - Two AGT400 Isotope Thickness Gauges have been started up at California Steel Industries. These gauges will soon be installed to their No. 2 CGL line, measuring cold rolled and pickled hot band steel up to .250" in thickness. Our AGT400 Isotope Thickness Gauge is the go-to thickness gauge for metal measurement. Having served the industry
- [Startup Complete at Voss Taylor](https://www.advgauging.com/startup-complete-at-voss-taylor/) - This week, our technicians have completed the startup with Voss Taylor for their new AGT High-Precision Width Gauge. This gauge was installed onto their custom pickling line and will measure various types of steel alloys. Now that the gauge is started up, Voss Taylor will enjoy more accurate measurements while our gauge takes up minimal
- [High-Precision AGT Width Gauge Delivered to Voss Taylor](https://www.advgauging.com/high-precision-agt-width-gauge-delivered-to-voss-taylor/) - Voss Taylor has recently received their AGT Width Gauge. This gauge will be installed by our technicians onto their 72" pickling line to measure various steel alloys. Our gauge will help provide key measurements required for quality control, helping improve production speed and operator safety. In comparison to competing and obsolete width gauges, our AGT
- [Cleveland Cliffs Purchases AGT Width Gauge](https://www.advgauging.com/cleveland-cliffs-purchases-agt-width-gauge/) - Cleveland Cliffs' Columbus Coating facility has completed the purchase of one AGT Width Gauge. This gauge will be installed onto their custom galvanizing line, measuring between 36 and 72" sheet widths. This gauge will be replacing an obsolete Harris Scan-a-Line Width Gauge. Our AGT Width Gauge sets itself apart from the competition with its conical
- [Two AGT400 Upgrades Started Up in Mill Steel (MI)](https://www.advgauging.com/two-agt400-upgrades-started-up-in-mill-steel-mi/) - The two obsolete ESC gauges at Mill Steel's Melvindale location have been fully upgraded to AGT400 Isotope Thickness Gauges. By purchasing our AGT400 Upgrade, Mill Steel makes the wise choice to re-use their existing frame, while upgrading their obsolete software and hardware. Many metal toll processors with outdated, obsolete thickness gauges come across a dilemma,
- [Voss Taylor Purchases AGT Width Gauge](https://www.advgauging.com/voss-taylor-purchases-agt-width-gauge/) - Voss Industries of Taylor, MI has purchased a high-precision AGT Width Gauge, which will be used to measure steel on their custom 72" pickle line.
- [AGT400 Startup Completed in Phoenix Metals](https://www.advgauging.com/agt400-startup-completed-in-phoenix-metals/) - Phoenix Metals has completed the startup of their AGT400 Isotope Thickness Gauge. The gauge was installed onto their 72" Red Bud CTL line, where it will process aluminum, stainless steel, HRPO, and various coated carbon products. Phoenix also has purchased our TCP/IP HMI Communication and Offline Data Analysis software packages. Our TCP/IP Communication capabilities help
- [AGT400 Upgrades Shipped to Mill Steel](https://www.advgauging.com/two-agt400-upgrades-shipped-to-mill-steel/) - Mill Steel has received two AGT400 Upgrade packages from Advanced Gauging Technologies. This is the next step in replacing their current obsolete isotope gauges. By re-using their current C-frames and hardware, Mill Steel is saving on costs while enjoying the benefits of a greatly improved thickness gauge. Obsolete gauges are often more trouble to remove
- [AGT800XT Gauge Shipped to Darke Metals](https://www.advgauging.com/agt800xt-gauge-shipped-to-darke-metals/) - Darke Metals has received its AGT800XT, which was purchased this January. Their gauge will be installed on a 75" slitting line to measure various steel alloys during processing. This gauge's frame is capable of oscillation, which allows for the frame to scan the material's entire width, ensuring further quality control of the entire coil. Additionally,
- [AGT800XT Shipped to Feroleto of Knoxville](https://www.advgauging.com/agt800xt-shipped-to-feroleto-of-knoxville/) - Feroleto Steel Company's facility in Knoxville, Tennessee has received its AGT800XT Laser Thickness Gauge. This gauge will be used on their Braner 64" Slitter, and will be started up in November of 2025. It will measure various steel alloys, providing accurate measurements and printable data analysis for each coil measured. By purchasing our AGT800XT Laser
- [Mill Steel Orders Two New AGT400s](https://www.advgauging.com/mill-steel-orders-two-new-agt400s/) - Mill Steel has purchased two AGT400 Isotope Thickness Gauges for their reducing mill in Birmingham, Alabama. These gauges will be installed at the entry and exit sides of their new 18" Ruesch reduction mill. Our AGT400s will provide documentation and detailed coil reports for Mill Steel's plantwide network while providing industry-leading accuracy and reliability. This
- [AGT Receives New Order From South Korea](https://www.advgauging.com/agt-receives-new-order-from-south-korea/) - AGT has received two orders for our AGT400's front end for their project with Wonilsa Co. Ltd. They are measuring copper, bronze, and brass with our parts.
- [AGT Width Gauge: Same Specs, Lowered Costs](https://www.advgauging.com/agt-width-gauge-same-specs-slashed-price/) - For 2026, we have focused our efforts here at AGT to help fit the needs of our many clients and customers, especially during the previous quarters of uncertainty for the steel industry. As such, we've finalized development for our new, updated AGT Width Gauge. Due to these internal developments, the price for a new AGT
- [Laser Thickness Gauges and Measurement](https://www.advgauging.com/laser-thickness-gauges-and-measurement/) - Our AGT800XT Laser Thickness Gauge offers many benefits compared to competing gauges; primarily, having a laser-based gauge helps to avoid the paperwork and costs of isotope gauges. However, what sets our laser gauges apart from competing gauges most of all is their expansive measurement capabilities. Isotope gauges are largely restricted to metal applications, due to
- [AGT400 Shipped to Phoenix Metals](https://www.advgauging.com/agt400-shipped-to-phoenix-metals/) - Phoenix Metals has received its AGT400 Isotope Thickness Gauge and is preparing for upcoming installation. This gauge will see use on a 72" Red Bud CTL line. This gauge is utilizing an oscillating C-Frame in order to scan the full width of the material, ensuring further accuracy in its measurements. This way, Phoenix Metals will
- [Gauge of the Month: AGT600 Thickness Gauge](https://www.advgauging.com/gauge-of-the-month-agt600-thickness-gauge/) - This month, we’re spotlighting the AGT600 Industrial Laser Thickness Gauge a powerful, non-contact solution designed to replace traditional contact gauges with greater accuracy, reliability, and virtually no maintenance. The AGT600 is built on a rugged C-frame design engineered to fit directly into your existing gauge track, allowing mills to upgrade their measurement technology with minimal
- [Technician Tuesday: Meet the Experts Behind the Measurement](https://www.advgauging.com/technician-tuesday-meet-the-experts-behind-the-measurement/) - At Advanced Gauging Technologies, accurate measurement starts with the people behind the equipment. Our field service technicians work directly on customer lines, ensuring our gauging systems are installed, maintained, and performing exactly as they should; even in the toughest mill environments. This week’s Technician Tuesday spotlight features Jim Russell, one of the dedicated professionals who
- [Technician Tuesday: Meet Ethin!](https://www.advgauging.com/technician-tuesday-meet-ethin/) - Ethin joined the AGT family on March 31st, 2025, and has been making an impact ever since. One of his favorite parts of working at AGT is getting to dive into the science behind what we do, and seeing firsthand how it helps customers every day. He also loves the new experiences that come with
- [Technician Tuesday: Meet the Experts Behind the Measurement](https://www.advgauging.com/technician-tuesday-meet-the-experts-behind-the-measurement-2/) - Technician Tuesday Spotlight: Tony Drakeford This week, we’re excited to highlight Tony Drakeford, one of the newest members of the AGT technician family! Tony is originally from Plainfield, New Jersey, and made the move to Ohio in 2015 to be closer to family. He officially joined the AGT family in August 2023, and we’re
- [Mill Steel Advances Quality with AGT400 Upgrades](https://www.advgauging.com/mill-steel-advances-quality-with-agt400-upgrades/) - Mill Steel has recently placed an order for AGT400 system upgrades, reinforcing their commitment to precision measurement and consistent quality across their operations. These upgrades will enhance real-time thickness monitoring, improve data visibility, and support tighter process control on the line. AGT is proud to support Mill Steel as they continue investing in reliable, proven
- [What is Time Concert?](https://www.advgauging.com/what-is-gauge-sampling-rate/) - Time concert is similar to gauge sampling rate. It's how often the measurement system takes a reading. Usually this is expressed as readers per second (Hz). For instance, a time concert of 1,000 Hz means the gauge is capturing 1,000 measurements per second. Why It Matters A higher time concert allows your gauge to: Detect
- [2025 Trends in Steel Processing Technology](https://www.advgauging.com/2025-trends-in-steel-processing-technology/) - The steel industry is evolving quickly, and 2025 is shaping up to be a major year for modernization. From sustainability initiatives to smarter production lines, here are the key trends reshaping steel processing—and what they mean for quality, measurement, and plant performance. 1. The Rise of Green Steel More mills are shifting toward low-carbon steelmaking
- [Isotope vs. Laser Thickness Gauges: Which One Is Right for Your Line?](https://www.advgauging.com/isotope-vs-laser-thickness-gauges-which-one-is-right-for-your-line/) - Selecting the right thickness gauge is key to maintaining quality and minimizing scrap. Two common technologies—isotope and laser—each offer unique advantages depending on your material, environment, and accuracy needs. Isotope Thickness Gauges Isotope gauges use a low-level radioactive source and detector to measure thickness. They’ve been a proven standard in steel processing for decades. Best
- [Why Accurate Width Measurements Matter For Steel Processors](https://www.advgauging.com/why-accurate-width-measurements-matter/) - In coil processing, even small width variations can lead to big problems—scrap, rework, customer claims, or inconsistent slit widths. As tolerances get tighter and material costs rise, precise measurement has become essential for maintaining quality and protecting margins. What Causes Width Variation? Width issues often come from: Worn slitter tooling Coil camber or wandering Setup
- [Honoring Our Veterans](https://www.advgauging.com/honoring-our-veterans/) - Today, we pause to honor the brave men and women who have served and continue to serve our country. Their courage, dedication, and sacrifice protect the freedoms we enjoy every day. At Advanced Gauging Technologies, we extend our heartfelt gratitude to all veterans—especially those within our community and industry—for their service and commitment. We are
- [How Centerline Measurement Prevents Edge Damage and Slit Coil Problems](https://www.advgauging.com/how-centerline-measurement-prevents-edge-damage-and-slit-coil-problems/) - In coil processing, even small misalignments can lead to big quality issues. When material strays from the true centerline, the result is often edge damage, uneven slitting, and costly scrap. That’s why real-time centerline measurement has become a must-have tool for modern steel and metals processors striving to improve efficiency and quality. Why Centerline Alignment
- [AGT400 Reading the Signs: How Gauges Help Us Stay in Control When the Pressure’s On](https://www.advgauging.com/agt400-reading-the-signs-how-gauges-help-us-stay-in-control-when-the-pressures-on/) - At Advanced Gauging Technologies, safety and clarity are at the core of every instrument we design. While our gamma and isotope gauges come in different models tailored for specific applications, they all share a consistent and intuitive light indicator system. These sensors give operators immediate visual feedback on the gauge’s operational and safety status helping
- [Upgrading to AGT400- Budget-Friendly and Reliable](https://www.advgauging.com/upgrading-to-agt400-budget-friendly-and-reliable/) - It's no secret that revenue has been inconsistent for many steel processing companies this year. For many cases, that may mean cutting down on spending and focusing on production, or pushing projects further into the future to maintain profits. Thankfully, at Advanced Gauging Technologies, we've been working for decades to provide cost-effective solutions for customers
- [Mill Steel Starts Up AGT400 Upgrade](https://www.advgauging.com/mill-steel-starts-up-agt400-upgrade/) - Mill Steel has completed the upgrade process for their obsolete GR100 Isotope Gauge. Now, Mill Steel will enjoy the benefits of a fully operational AGT400, complete with upgraded electronics and data storage. Our AGT400 Isotope Thickness Gauge is capable of measuring various metals. For coil processing lines such as slitters, CTL, galvanizing, and pickle lines,
- [AGT400 Upgrade Equipment Shipped to Mill Steel](https://www.advgauging.com/agt400-upgrade-equipment-shipped-to-mill-steel/) - Mill Steel's AGT400 upgrade has shipped to their facility in Birmingham, Alabama. Their previous GR100, located on their 72" Braner Slitting Line, will be upgraded and started up in February of 2025. Advanced Gauging Technologies' technicians will replace the outdated source head, wiring, and electroni Obsolete gauges can be more trouble than they're worth-- many
- [Allied Tube & Conduit Corp. Completes AGT400 Startup](https://www.advgauging.com/allied-tube-conduit-corp-completes-agt400-startup/) - Allied Tube & Conduit's AGT400 has now been started up. This AGT400 Isotope Thickness Gauge will be used to measure various steel alloys on their 72" ProEco pickle line. The AGT400 is uniquely effective with pickle lines, as they are durable and can easily handle the conditions present in pickling lines and similar applications. Not
- [Allied Tube & Conduit Corp. Receives New AGT400 Thickness Gauge](https://www.advgauging.com/allied-tube-conduit-corp-receives-new-agt400-thickness-gauge/) - Allied Tube & Conduit Corp. has received their AGT400 Isotope Thickness Gauge. Their gauge shipped to them on April 10th, 2025. This gauge will be used on their 72" ProEco Pickle Line to measure various steel alloys with a thickness range of 0.050" and 0.200". Allied Tube & Conduit Corp.'s AGT400 includes an oscillating C-Frame
- [New AGT800XT Shipped to Venture Steel](https://www.advgauging.com/new-agt800xt-shipped-to-venture-steel/) - Venture Steel of Mexico has received a brand-new AGT800XT to measure steel thickness on their 62" Athader slitting line and is awaiting its startup. Their new gauge, when started up, will give reliable, accurate measurements while remaining non-contact, lowering the risk of wear and tear on the material and the gauge. The AGT800XT also provides SPC reporting,
- [AGT800XT Laser Thickness Gauge Shipped to Ohio Pickling & Processing](https://www.advgauging.com/agt800xt-laser-thickness-gauge-shipped-to-ohio-pickling-processing/) - Our AGT800XT Laser Thickness Gauge has been shipped to Ohio Pickling & Processing to await startup in the coming months. This will be installed onto their 72" Wean Pickle Line to measure steel alloys. Ohio Pickling & Processing will be utilizing the AGT800XT to measure thicker material than other competing thickness gauges are capable of
- [Liberty Steel Products Purchases Source for Used AGT400 Gauge](https://www.advgauging.com/liberty-steel-products-orders-source-for-used-agt400-gauge/) - Liberty Steel has recently purchased a 72" ProEco slitter from Worthington Industries with one of our AGT400 gauges included. Liberty Steel has purchased a replacement source for the AGT400 Isotope Gauge, and will be installing it between March and April of next year. Due to the durability and long lifespan of our AGT400 Isotope Thickness
- [AGT800XT Laser Thickness Gauge Shipped to CEMCO](https://www.advgauging.com/agt800xt-laser-thickness-gauge-shipped-to-cemco/) - CEMCO has received its brand-new AGT800XT Laser Thickness Gauge. When started up, the gauge will provide their facility with quick, reliable measurements with its high-precision Keyence Class 2 lasers. Additionally, its S.P.C. reporting and storage capabilities will help the facility keep track of and create useful charts of the information gathered. This information can be
- [Seasons Change; But your Measurement Accuracy Shouldn't](https://www.advgauging.com/seasons-change-but-your-measurement-accuracy-shouldnt/) - As the seasons shift, so do the physical properties of many raw materials and that can wreak havoc on process consistency. High summer humidity can increase the moisture content of raw inputs like iron ore, sinter, coke, or even added materials like plastic polymers used in injection processes or composite production. In winter, extreme cold
- [Honoring hard work and American craftsmanship, from the factory floor to the foundry.](https://www.advgauging.com/honoring-hard-work-and-american-craftsmanship-from-the-factory-floor-to-the-foundry/) - In honor of Labor Day earlier this week. We’re proud to support the American steel industry with precision gauging technology that keeps production efficient, accurate, and safe. From isotope thickness gauges to cutting-edge laser measurement systems, our products are designed, engineered, and built right here in the USA; because we believe American manufacturing deserves American-made
- [Two New AGT400s Shipped to California Steel Industries](https://www.advgauging.com/two-new-agt400s-shipped-to-california-steel-industries/) - On March 27, 2025, California Steel Industries received two brand-new AGT400s for their 52.5" #2 CGL line. They'll be measuring various steel alloys. These two AGT800s will be the company's seventh and eighth gauges they've purchased. AGT is excited to continue working with California Steel and provide them with reliable, durable measuring tools. Not only
- [Venture Steel Completes Startup of New AGT800 Laser Thickness Guage](https://www.advgauging.com/venture-steel-completes-startup-of-new-agt800-laser-thickness-guage/) - Advanced Gauging Technologies has completed the startup of a new AGT800 Laser Thickness Gauge. This Gauge was installed onto a new 62" Athader Slitting Line and will be measuring the thickness of various steel alloys. Their AGT800 will not only provide quick, accurate, and reliable thickness readings, but will also store data locally or on
- [Your PC Deserves an Upgrade; Windows 11 is Here!](https://www.advgauging.com/your-pc-deserves-an-upgrade-windows-11-is-here/) - Windows 10 and older versions are no longer receiving updates or security patches from Microsoft. This makes your current system slower, less secure, and increasingly incompatible with new software. Now’s the perfect time to upgrade to a brand-new computer with Windows 11: built for speed, security, and modern performance. Our latest systems come ready to
- [Ohio Pickling & Processing Starts up AGT800 Thickness Gauge](https://www.advgauging.com/ohio-pickling-agt800-thickness-gauge/) - Ohio Pickling & Processing has received its AGT800 Thickness Gauge and has completed its startup. It will be replacing an AGT400 on a 72” Wean Pickle Line on various steel alloys. The AGT800 Laser Thickness Gauge is able to measure much thicker material than competing thickness gauges, and measures at an accuracy of < 0.0004".
- [CEMCO Enhances Slitting Line with AGT800 Thickness Gauge Installation](https://www.advgauging.com/cemco-enhanced-slitting-line-with-agt400-thickness-gauge-installation/) - This installation marks another important step in CEMCO’s ongoing efforts to enhance quality control and streamline their metal processing operations. With the AGT800 now fully operational, CEMCO can benefit from real-time, non-contact thickness measurements that provide both speed and precision across their slitting line. Purpose-built for the metals industry, the AGT800 delivers fast, accurate, and
- [Steel Technologies Completes an AGT800 Startup in Portage, IN](https://www.advgauging.com/steel-technologies-completes-an-agt800/) - Steel Technologies of Portage, Indiana has completed their startup for a brand-new AGT800XT Laser Thickness Gauge. This gauge will be located on a 72" Fagor slitting line, measuring various steel alloys. Steel Technologies has been a longstanding customer of ours, and will continue to reap the benefits of our many products. With an AGT800XT Laser
- [Mill Steel of Melvindale Completes Two AGT400 Upgrades](https://www.advgauging.com/mill-steel-of-melvindale-completes-two-agt400-upgrades/) - We at Advanced Gauging Technologies are proud to announce the startup of two AGT400 Isotope upgrades in Mill Steel's Melvindale plant. One upgrade is on their #79 line, and the other is on the #74 line. Mill Steel has worked with us on upgrading many of their obsolete isotope gauges, and has enjoyed consistent service,
- [Nucor CSI Fontana Invests in Precision with Two New AGT400 Thickness Gauges](https://www.advgauging.com/nucor-csi-fontana-invests-in-precision-with-two-new-agt400-thickness-gauges/) - Advanced Gauging Technologies is proud to announce a new purchase order from Nucor Steel California (CSI) in Fontana, CA for two state-of-the-art AGT400 Isotope Thickness Gauges. These gauges will be installed on the No. 3 Continuous Galvanizing Line (CGL), with shipment scheduled for August 2026. Purpose-built for the metals industry, the AGT400 delivers fast, accurate,
- [Choose Confidence, Choose American Made](https://www.advgauging.com/choose-confidence-choose-american-made/) - When you choose our gauges, you're doing more than investing in top-tier technology—you're supporting a small, American company that’s built its reputation on precision, reliability, and customer-first values. At Advanced Gauging Technologies, our gauges are proudly engineered and built in the USA, using domestically sourced components. That means no overseas delays, no tariff-related price hikes,
- [Ebner Industrial Furnaces Completes Two AGT800XT Startups](https://www.advgauging.com/ebner-furnaces-agt800-startups/) - Advanced Gauging Technologies has recently completed the startup of two brand-new AGT800XT gauges at Ebner Industrial Furnaces, both on a 50" Annealing Line. They are running Stainless Steel and Titanium on this line. Ebner will be enjoying a wealth of benefits from their new gauges; now they're able to continually measure thickness and make corrections
- [Sales Associates Needed](https://www.advgauging.com/sales-associates-needed/) - At Advanced Gauging Technologies (A.G.T.), we’ve spent decades building something pretty special — a cutting-edge company with deep roots, strong values, and a tight-knit team that’s passionate about what we do. Now, we’re growing — and we need smart, ambitious, people-oriented individuals to help us do it. That’s where you come in. 👀 Who We’re
- [Don’t worry about tariffs—check out Advanced Gauging Technologies' Width Gauge, proudly made in the USA.](https://www.advgauging.com/dont-worry-about-tariffs-check-out-advanced-gauging-technologies-width-gauge-proudly-made-in-the-usa/) - When you choose our width gauge, you're not just investing in cutting-edge technology; you're supporting American manufacturing and gaining peace of mind. Our gauges are engineered with precision, built to withstand the toughest industrial environments, and backed by a team that’s committed to your success. With no reliance on overseas components, you avoid costly import
- [A.G.T. Receives New Gauge Order from Feroleto Steel Co., Inc.](https://www.advgauging.com/a-g-t-receives-new-gauge-order-from-feroleto-steel-co-inc/) - Plain City, Ohio – Advanced Gauging Technologies has received a new purchase order from Feroleto Steel Co., Inc. Knoxville TN. for an AGT800 Laser Thickness Gauge. The gauge will be installed on a 64” Braner Turret Head slitting line and is scheduled to ship in June 2025.
- [New Gauge Order](https://www.advgauging.com/new-gauge-order/) - Metal Industry News KORE Machinery Orders AGT Gauge By Metal Center News Staff on Jan 30, 2025 Advanced Gauging Technologies has received a new gauge purchase order from KORE Machinery. The order is for a AGT400 Isotope Thickness Gauge to be located on a Oscillating C-frame 75-inch line. KORE Machinery, Dover, Del., is a leading manufacturer of coil
- [New AGT400 Isotope Thickness Gauge order.](https://www.advgauging.com/new-agt400-isotope-thickness-gauge-order/) - Plain City, Ohio – Advanced Gauging Technologies has received a new purchase order from Phoenix Metals in Peachtree Corners, GA. The order is for an AGT 400 Isotope Thickness Gauge that will be used to measure various steel alloys
- [A.G.T. receives a new Gauge Order from Mill Steel Birmingham, AL.](https://www.advgauging.com/a-g-t-receives-a-new-gauge-order-from-mill-steel-birmingham-al/) - Advanced Gauging Technologies has received a new gauge purchase order from Mill Steel Birmingham, AL. The order is for AGT400 Isotope Thickness Gauges. The gauge will be located on a 72” Braner slitting line and scheduled to ship in January 2025.
- [A.G.T. receives a new Gauge Order from Phoenix Metals Co.](https://www.advgauging.com/a-g-t-receives-a-new-gauge-order-from-phoenix-metals-co/) - Advanced Gauging Technologies has received a new gauge purchase order from Phoenix Metals Katy, TX. The order is for AGT400 Laser Thickness Gauges. The gauge will be located on a 72” Red Bud slitting line and scheduled to ship in April 2024. This is Phoenix Metals first thickness gauge order from AGT.
- [A.G.T. Ships New Pipe & Pole System to McWane Ductile](https://www.advgauging.com/a-g-t-ships-new-pipe-pole-system-to-mcwane-ductile/) - A.G.T. shipped two new AGT800 Laser Thickness Gauges on October 21st, 2024 to McWane Ductile's Provo Utah plant. The two gauges work together to create a proprietary Pipe & Pole Wall Thickness measuring system developed by A.G.T. specifically for McWane Ductile. This will be the second Pipe & Pole Wall Thickness measuring system installed at
- [New AGT400 Order Received from Allied Tube & Conduit](https://www.advgauging.com/new-agt400-order-received-from-allied-tube-conduit/) - Advanced Gauging Technologies has received a new purchase order from Allied Tube & Conduit (Division of Atkore) in Harvey, IL. The order is for an AGT 400 Isotope Thickness Gauge that will be used to measure various steel alloys on a 72” Pro-Eco Pickle line. The gauge is slated to ship in two phases; Electronics
- [New Two Gauge Order Received from CSI Nucor](https://www.advgauging.com/new-two-gauge-order-received-from-csi-nucor/) - Advanced Gauging Technologies has received a new two gauge purchase order from California Steel Industries, Inc. , Fontana, CA. The order is for two AGT400 Isotope Thickness Gauges for use on the #2 CGL Line. The AGT400’s will provide documentation and detailed coil reports which will be integrated into CSI’s plant wide network. That’s #MeasuringMadeEasy.
- [AGT800 Ships to Feroleto Steel Weirton](https://www.advgauging.com/agt800-ships-to-feroleto-steel-weirton/) - A new AGT800 Laser Thickness Gauge was shipped to Feroleto Steel's Weirton, WV plant on July 19, 2024. The gauge will be located on a 64" Slitting Line and will be the Weirton plants 2nd AGT800.
- [A.G.T. Receives New AGT800 Order from Venture Steel de Mexico](https://www.advgauging.com/a-g-t-receives-new-agt800-order-from-venture-steel-de-mexico/) - Advanced Gauging Technologies has received a new purchase order from Venture Steel de Mexico (Ramos Arizpe) for an AGT 800 Laser Thickness Gauge. The gauge will be installed on a new 62” Athader Slitting Line and will be used to measure various steel alloys. Shipment is scheduled for January, 2025. That’s #MeasuringMadeEasy.
- [Ohio Pickling & Processing](https://www.advgauging.com/ohio-pickling-processing/) - Ohio Pickling & Processing has bought their first AGT800 laser thickness gauge.
- [CEMCO Steel in Denver buys their first thickness gauge](https://www.advgauging.com/cemco-steel-in-denver-buys-their-first-thickness-gauge/) - CEMCO Steel in Denver buys their first AGT800 laser thickness gauge. They want to use this gauge to track the steel from different suppliers and optimize their purchasing.
- [McWane Ductile buys their fourth pipe and pole gauge](https://www.advgauging.com/mcwane-ductile-buys-their-fourth-pipe-and-pole-gauge/) - McWane Ductile has ordered their fourth pipe and pole gauge for their Provo Utah location. This gauge has been so successful for them they want to run all of their production through it.
- [Harris’ new AGT400 upgrade shipped](https://www.advgauging.com/harris-new-agt400-upgrade-shipped/) - Harris’ new AGT400 upgrade for their Weston/Loral gauge shipped
- [Mill Steel Mansfield AGT400 upgrade shipped](https://www.advgauging.com/mill-steel-mansfield-upgrade-shipped/) - The GR100 to AGT400 upgrade has been shipped to Mill Steel in Mansfield Ohio.
- [Mill Steel Melvindale AGT400 upgrade shipped](https://www.advgauging.com/mill-steel-melvindale/) - The DMC450 to AGT400 upgrade has been shipped to Mill Steel in Melvindale Michigan
- [Mill Steel Melvindale AGT400 upgrade shipped](https://www.advgauging.com/mill-steel-melvindale-upgrade-shipped/) - The GR100 to AGT400 upgrade has been shipped to Mill Steel in Melvindale Michigan
- [Riverview Steel AGT400 thickness gauge shippment](https://www.advgauging.com/riverview-steel-agt400-shippment/) - The AGT400 for Riverview Steel in Windsor Ont. has shipped. This will be for a new slitting line.
- [Feralloy Portage second AGT800 thickness gauge shipped](https://www.advgauging.com/feralloy-portage-second-agt800-shipped/) - Feralloy Portage second AGT800 has shipped. This is for an existing 74" line.
- [Feralloy Portage first AGT800 thickness gauge shipped](https://www.advgauging.com/feralloy-portage-first-agt800-shipped/) - Feralloy Portage first AGT800 has shipped. This is for an existing 50" line.
- [Steel Technologies Portage AGT800 thickness gauge shipped](https://www.advgauging.com/steel-technologies-portage-agt800-shipped/) - Steel Technologies Portage location has received their new AGT800 hanging C-frame for their new slitting line. Startup will be over the summer.
- [Cleveland Cliffs AGT800 thickness gauges ship](https://www.advgauging.com/cleveland-cliffs-gauges-ship/) - The two AGT800s for the Cleveland Cliffs Coshocton Ohio's new lines have been shipped to Ebner. Start up will be sometime over the summer.
- [Galvaprime AGT800 shipment](https://www.advgauging.com/galvaprime-agt800-shipment/) - The new AGT800 for Galvaprime in Santa Catarina, NL Mexico has shipped.
- [Advanced Gauging Technologies sells a record number of laser thickness gauges in 2023](https://www.advgauging.com/advanced-gauging-technologies-sells-a-record-number-of-laser-thickness-gauges-in-2023/) - Advanced Gauging Technologies sells a record number of laser thickness gauge in 2023. Eleven AGT800 laser thickness gauges and one AGT600 sets a one-year record for laser thickness gauge sales. AGT is the leader in laser thickness gauges, have more sold and operating than any other manufacturer. New innovations and improvements are coming for the
- [Feralloy orders their fourth AGT800 laser thickness gauge](https://www.advgauging.com/feralloy-orders-their-fourth-agt800-laser-thickness-gauge/) - Feralloy Portage has ordered their fourth AGT800 laser thickness gauge this year. This is a 100" gauge, the largest AGT has made.
- [Mill Steel's third upgrade this year](https://www.advgauging.com/mill-steels-third-upgrade-this-year/) - Mill Steel has purchased their third AGT400 thickness gauge upgrade this year. This one is for their #74 line in Melvindale.
- [Feroleto's new AGT800 laser thickness gauge](https://www.advgauging.com/feroletos-new-agt800-laser-thickness-gauge/) - Feroleto Steel has ordered a new AGT800 laser thickness gauge for their West Virginia location.
- [Harris' new AGT400 upgrade](https://www.advgauging.com/harris-new-agt400-upgrade/) - Harris Steel in Cicero IL has ordered a new AGT400 upgrade to replace their Weston/Loral gauge
- [Mill Steel orders two AGT400 upgrades](https://www.advgauging.com/mill-steel-orders-two-agt400-upgrades/) - Mill Steel has ordered two AGT400 upgrades. One for the 72" slitter in Mansfield and the second for #79 slitter in Melvindale.
- [Feralloy Portage orders three new AGT800 laser thickness gauges](https://www.advgauging.com/feralloy-portage-orders-three-new-agt800-laser-thickness-gauges/) - Feralloy in Portage has ordered three new AGT800 laser thickness gauges. A 74" for the Stamco slitter, a 50" for the cut-to-length liner and a 96" for the temper line.
- [Steel Technologies' new AGT800](https://www.advgauging.com/steel-technologies-new-agt800/) - Steel Technologies Portage has purchased a new AGT800 laser thickness gauge with a hanging C-frame for their new line. This gauge will be install next year.
- [Galvaprime's new AGT800 laser thickness gauge](https://www.advgauging.com/galvaprimes-new-agt800-laser-thickness-gauge/) - Galvaprime in Santa Catarina NL Mexico has purchased their first AGT800 laser thickness gauge.
- [Galvasid's new AGT800 thickness gauge and AGT Width gauge](https://www.advgauging.com/galvasids-new-agt800-thickness-gauge-and-agt-width-gauge/) - Galvasid of Apodaca NL Mexico has purchased a new AGT800 thickness gauge and AGT Width gauge for their new line.
- [National Material's new AGT800](https://www.advgauging.com/national-materials-new-agt800/) - National Material has purchased a new AGT800 laser thickness gauge for Plant 1.
- [Voss Clark's new AGT Width gauge](https://www.advgauging.com/voss-clarks-new-agt-width-gauge/) - Voss Clark has purchased the new AGT Width gauge for their pickle line. This will the first installation of this gauge.
- [National Galvanizing buys another AGT400 thickness gauge](https://www.advgauging.com/national-galvanizing-buys-another-agt400-thickness-gauge/) - National Galvanizing has bought another AGT400 Thickness Gauge. This is their third AGT thickness along with another AGT400 and an AGT800. This AGT400 will be installed on a 72” Pro-Eco pickling line at the entry end where it will measure various steel alloys. Pickling line entry ends are ideal for the AGT400 as the material
- [Steel Technologies Portage laser thickness gauges](https://www.advgauging.com/steel-technologies-portage-laser-thickness-gauges/) - Steel Technologies in Portage IN has purchased an AGT800 and AGT600 laser thickness gauges for their rolling mill to replace their Vollmer contact gauges. The new gauge will interface with the mill using the existing BDC interface.
- [Spartech's new AGT800](https://www.advgauging.com/spartechs-new-agt800/) - Spartech in Koler WI has purchased a new AGT800 laser thickness gauge for their calendaring line. This will be AGT's first installation on a calendaring line.
- [Riverview Steel's new AGT400](https://www.advgauging.com/riverview-steels-new-agt400/) - Riverview Steel has purchased a new AGT400 thickness gauge for their new line in Windsor Ont.
- [Metals USA buys their first AGT Mult-Width™ gauge](https://www.advgauging.com/metals-usa-buys-their-first-agt-mult-width-gauge/) - Advanced Gauging Technologies has received the first order from Metals USA in Springfield, OH for the revolutionary AGT Mult-Width™ gauge. The new gauge will be installed on a 60” Monarch Stamco slitting line. Metals USA is looking forward to more consistent mult width measurements and improved operator safety. The new AGT Mult-Width™ gauge automatically measures
- [Measuring Mult-Widths:  Laser vs Camera](https://www.advgauging.com/measuring-mult-widths-laser-vs-camera/) - Accurate measuring of mult widths on slitting lines has long been a goal of metal processors. Historically, mults (strips cut from master coils) are typically measured by hand which, as most people know, is inconsistent, time consuming and oftentimes unsafe. However, as tolerances become tighter it has become more important than ever for processors to
- [Heidtman Steel Orders New AGT400 Upgrade](https://www.advgauging.com/heidtman-steel-orders-new-agt400-upgrade/) - Heidtman Steel Products, Inc. has ordered a new AGT400 Upgrade for an obsolete GR100 thickness gauge at their Erie, MI plant. The gauge will be located on a 62" Pro-Eco Slitting Line and used to measure various steel alloys up to .250" in thickness. This order marks the 10th addition to Heidtman's family of A.G.T.
- [A.G.T. Receives 2nd AGT400 Order from Ohio-Kentucky Steel](https://www.advgauging.com/a-g-t-receives-2nd-agt400-order-from-ohio-kentucky-steel/) - Advanced Gauging Technologies has received an order from Ohio-Kentucky Steel in Franklin, OH for their second AGT400. This order follows closely on the heels of their first gauge P.O. which was placed earlier this year. The new AGT400 will be installed on a 60” Stamco slitting line where it will measure various steel alloys including
- [AGT400 Startup at Ohio-Kentucky Steel!](https://www.advgauging.com/agt400-startup-at-ohio-kentucky-steel/) - Advanced Gauging Technologies has just completed the startup of a brand new AGT400 at Ohio-Kentucky Steel in Franklin, Ohio. This is their first thickness gauge purchase so we are excited to be working with them! We installed their AGT400 on a 76” Stamco Slitting Line where it is measuring various steel alloys including galvanized steel
- [Ohio-Kentucky Steel’s New AGT400 Ships!](https://www.advgauging.com/4884-2/) - Advanced Gauging Technologies just shipped a brand new AGT400 Isotope Thickness Gauge to Ohio-Kentucky Steel in Franklin, Ohio. This is their first gauge purchase so we are excited to begin working with them as new customers. This AGT400 will soon be installed on their 76” Stamco Slitting Line where it will measure various steel alloys
- [New AGT800 Startup at Carpenter Technologies!](https://www.advgauging.com/new-agt800-startup-at-carpenter-technologies/) - Advanced Gauging Technologies just completed the startup of a new AGT800 Laser Thickness Gauge at Carpenter Technologies on their 18” Wet Grinding Line in Reading, Pennsylvania. They are running stainless steel, high nickel alloy, and cold worked steel on this line. Carpenter is gaining a great deal of benefits from this gauge as it allows
- [New AGT400 Startup at Steel Technologies de Mexico!](https://www.advgauging.com/new-agt400-startup-at-steel-technologies-de-mexico/) - Advanced Gauging Technologies has just completed the startup and training for a brand new AGT400 at Steel Technologies de Mexico in Pesqueria, NL! This gauge is installed on a 54” slitter and measures various CR, HR, HRPO, Galvanized and Galvalume materials with a thickness range from .006” to .040” thick. As a leader in non-contact
- [Ohio-Kentucky Steel AGT400 Order!](https://www.advgauging.com/ohio-kentucky-steel-agt400-order/) - Advanced Gauging Technologies has just received an order for a brand new AGT400 from Ohio-Kentucky Steel in Franklin, Ohio. This is their first gauge purchase so we are excited to begin working with them as new customers. This AGT400 will be installed on a 76” Stamco slitting line where it will measure various steel alloys
- [A.G.T. Receives an AGT400 order from Jemison Metals!](https://www.advgauging.com/a-g-t-receives-an-agt400-order-from-jemison-metals-2/) - Advanced Gauging Technologies just shipped a brand new AGT400 Isotope Thickness Gauge to Jemison Metals in Sumpter, Alabama! The gauge will soon be installed on their 72” C-T-L / Stretch-Leveler line and will measure various steel alloys up to 0.321” thick with our Improved Resolution Detector Head. The AGT400 is a rugged piece of machinery
- [A.G.T. Receives an AGT400 Order from Jemison Metals!](https://www.advgauging.com/a-g-t-receives-an-agt400-order-from-jemison-metals/) - Advanced Gauging Technologies has just received an order for a brand new AGT400 from Jemison Metals in Sumpter, Alabama. This gauge is going to be installed on their 72” C-T-L / Stretch Leveler line and will measure various steel alloys up to 0.321” with our Improved Resolution Detector Head. The AGT400 is a rugged piece
- [A.G.T. Ships a New AGT800 to Carpenter Technologies!](https://www.advgauging.com/a-g-t-ships-a-new-agt800-order-to-carpenter-technologies/) - Advanced Gauging Technologies has just shipped a brand new AGT800 Laser Thickness Gauge to Carpenter Technologies in Reading, PA. The gauge will soon be installed on a 18” Wet Grinding line and will be used to measure stainless steel, high nickel alloy and cold worked steel. The benefits of having this gauge are immense as
- [AGT800 Thickness and AGT Mult-Width Shipped to Ternium in Mexico!](https://www.advgauging.com/4874-2/) - We just shipped a brand new AGT800 Thickness Gauge and AGT Mult-Width Gauge to Ternium Mexico for a startup that’s coming later this year! Ternium is Latin America’s leading steel producer and we are extremely excited for this partnership. Both gauges will soon be installed on a 60” Pro-Eco Slitting line that runs carbon steel.
- [National Galvanizing C-frame Upgrade Startup!](https://www.advgauging.com/national-galvanizing-c-frame-upgrade-startup/) - Advanced Gauging Technologies just completed the startup of a new AGT400 C-frame upgrade at National Galvanizing in Monroe, Michigan. Several years ago they upgraded their existing C-frame with an A.G.T. electronics cabinet as it served their needs at the time. Their gauging requirements changed and when they needed to measure thickness across the entire sheet
- [National Galvanizing C-frame Upgrade Ships!](https://www.advgauging.com/national-galvanizing-c-frame-upgrade-ships/) - Advanced Gauging Technologies just shipped a new AGT400 C-frame upgrade to National Galvanizing in Monroe, Michigan. Several years ago they purchased an electronics cabinet upgrade but elected to keep their centerline measurement C-frame in place. Their gauging requirements changed and they need thickness measurements across the entire width of the sheet so we were able
- [A.G.T. Receives Two New AGT400 Orders from South Korea!](https://www.advgauging.com/a-g-t-receives-two-new-agt400-orders-from-south-korea-2/) - Advanced Gauging Technologies has just received two more orders for AGT400 Thickness Gauges from KSP Steel Company in Incheon, South Korea! We previously completed the startup of two AGT400s at this facility late last year and soon after they decided it was time to add more of our gauges. Both new AGT400 C-frames will be
- [A.G.T. Receives a New AGT800 Order from Carpenter Technologies!](https://www.advgauging.com/a-g-t-receives-a-new-agt800-order-from-carpenter-technologies/) - Advanced Gauging Technologies has just received an order for a brand new AGT800 Laser Thickness Gauge from Carpenter Technologies in Reading, Pennsylvania! This gauge is going to be installed on an 18” wet grinding line and will be used to measure stainless steel, high nickel alloy and cold worked steel. The befits of having this
- [A.G.T. Receives Two New AGT400 Orders from South Korea!](https://www.advgauging.com/a-g-t-receives-two-new-agt400-orders-from-south-korea/) - Advanced Gauging Technologies has just received two more orders for AGT400 Thickness Gauges from KSP Steel Company in Incheon, South Korea! We previously completed the startup of two AGT400s at this facility late last year and soon after they decided it was time to add more of our gauges. Both new AGT400 C-frames will be
- [Ternium Mexico Purchases AGT8000 and AGT Mult-With!](https://www.advgauging.com/ternium-mexico-purchases-agt8000-and-agt-mult-with/) - Ternium Mexico has just confirmed an order for a brand new AGT800 Laser Thickness Gauge and AGT Mult-Width Gauge! Ternium is Latin America’s leading steel producer and we are extremely excited to announce the start of this partnership. Both gauges will be installed on a 60” Pro-Eco Slitting line that runs carbon steel. These gauges
- [A.G.T. Completes a New AGT800 Startup at Heidtman Steel Products!](https://www.advgauging.com/a-g-t-completes-a-new-agt800-startup-at-heidtman-steel-products/) - Advanced Gauging Technologies has just completed the startup of a brand new AGT800 Laser Thickness Gauge at Heidtman Steel Products in Granite City, Illinois! This gauge is running on a 72” pickle line and will be used to measure various types of steel alloys ranging from 0.040” to 0.500”. It has been exciting to grow
- [National Galvanizing Orders a C-frame Upgrade!](https://www.advgauging.com/national-galvanizing-orders-a-c-frame-upgrade/) - Advanced Gauging Technologies has just received an order for a new AGT400 C-frame upgrade from National Galvanizing in Monroe, Michigan. Several years ago they purchased our AGT400 gauge but only opted for centerline measurement. Their gauging requirements have changed and now it is critical that they get a thickness measurement across the entire width of
- [A.G.T. Completes the Startup of Two AGT400s in South Korea!](https://www.advgauging.com/a-g-t-completes-the-startup-of-two-agt400s-in-south-korea/) - Advanced Gauging Technologies has just completed the startup of two AGT400 Isotope Thickness Gauges at KSP Steel Company in Incheon, South Korea! These gauges are installed on a 20-High Rolling Mill and are being used to measure various grades and thicknesses of stainless steel. We are excited to be working with KSP Steel to help
- [AGT400 Startup at Steel Tech - Eminence!](https://www.advgauging.com/agt400-startup-at-steel-tech-eminence/) - Advanced Gauging Technologies has just completed the startup of an AGT400 C-frame Upgrade at Steel Technologies in Eminence, Kentucky! They replaced their old worn-out DMC C-frame with our new AGT400 C-frame to eliminate the hassles of DMC’s outdated technology. Steel Tech had already ditched their DMC electronics cabinet for this gauge and replaced it with
- [Advanced Gauging Technologies Ships a New AGT400 Upgrade to Steel Tech - Eminence!](https://www.advgauging.com/advanced-gauging-technologies-ships-a-new-agt400-upgrade-to-steel-tech-eminence/) - A.G.T. has just shipped a brand new AGT400 Upgrade to Steel Technologies in Eminence, Kentucky! They decided to upgrade their old DMC C-frame to our new AGT400 C-frame to eliminate the hassles of DMC's outdated technology. Steel Tech has already ditched their DMC electronics cabinet for this gauge and replaced it with our electronics cabinet
- [A.G.T. Ships Second AGT400 Thickness Gauge to South Korea!](https://www.advgauging.com/a-g-t-ships-second-agt400-thickness-gauge-to-south-korea/) - Advanced Gauging Technologies has just shipped a second AGT400 Thickness Gauge to KSP Steel Company in Incheon, South Korea! This gauge will be installed on a 20-High Rolling Mill and will be used to measure various grades and thicknesses of stainless steel. We are excited to be working with KSP Steel again and are happy
- [A.G.T. Completes an AGT800 Startup for PlatePlus in Granite City, Illinois!](https://www.advgauging.com/a-g-t-completes-an-agt800-startup-for-plateplus-in-granite-city-illinois/) - Advanced Gauging Technologies often works with OEM line manufacturers to implement thickness gauges onto lines before they are installed. Because we work with these manufacturers directly, they are able to design their lines with the perfect location for one of our thickness gauges. This was just the case with PlatePlus Inc. in Granite City, Illinois.
- [A.G.T. Ships a New AGT800 to Heidtman Steel!](https://www.advgauging.com/a-g-t-ships-a-new-agt800-to-heidtman-steel/) - Advanced Gauging Technologies has just shipped a new AGT800 to Heidtman Steel in Granite City, Illinois. The gauge is getting installed on a 72" Pickle Line and will be used to measure various types of steel alloys ranging from 0.040" to 0.500". We are excited to grow our relationship with Heidtman Steel as this is
- [Steel Technologies in Eminence, KY Orders an Upgrade!](https://www.advgauging.com/steel-technologies-in-eminence-ky-orders-an-upgrade/) - A.G.T. has just received an order for an AGT400 upgrade from Steel Technologies in Eminence, Kentucky. They are upgrading their old and outdated DMC C-frame to our brand new AGT400 C-frame. Steel Tech has already ditched their DMC electronics cabinet for this gauge and replaced it with our electronics cabinet several years ago. Based on
- [John Fearing Celebrates 20 Years at Advanced Gauging Technologies!](https://www.advgauging.com/john-fearing-celebrates-20-years-at-advanced-gauging-technologies/) - We want to congratulate our Field Service Coordinator, John Fearing on 20 years of service here at Advanced Gauging Technologies! John has been involved with the gauging industry ever since he graduated college when he began his career at Weston Control Systems. Over the years this company was bought out and changed names several times
- [A.G.T. Completes the Startup of Three New Gauges at SDI in Mississippi!](https://www.advgauging.com/a-g-t-completes-the-startup-of-three-new-gauges-at-sdi-in-mississippi/) - Advanced Gauging Technologies has just completed the startup of three brand new AGT400's at Steel Dynamics in Columbus, Mississippi. These are installed in their newest plant expansion which began operations earlier this year. The gauges are monitoring thickness on a 72" galvanizing line which runs various steel alloys ranging from 0.010 to 0.150". A.G.T. specializes
- [A.G.T. Ships a New AGT400 to Steel Technologies de Mexico!](https://www.advgauging.com/a-g-t-ships-a-new-agt400-to-steel-technologies-de-mexico/) - Advanced Gauging Technologies has just shipped a brand new AGT400 to Steel Technologies de Mexico in Pesqueria, NL. This gauging system will be installed on a 54" slitter and will measure various CR, HR, HRPO, Galvanized and Galvalume materials with a thickness range from .006" to .040". As a leaser in non-contact thickness gauging we
- [New AGT400 Startup Completed at Steel Tech - Canton!](https://www.advgauging.com/new-agt400-startup-completed-at-steel-tech-canton/) - Advanced Gauging Technologies has just completed the startup of an AGT400 to replace an outdated DMC 410 Thickness Gauge at Steel Technologies in Canton, Michigan. This is now the second AGT400 they have at this location. The gauge is installed on a 72" Braner Slitting line and is being used to measure various steel alloys
- [Heidtman Steel Orders a Brand New AGT800 from A.G.T.!](https://www.advgauging.com/heidtman-steel-orders-a-brand-new-agt800-from-a-g-t/) - Advanced Gauging Technologies has just received an order for a brand new AGT800 from Heidtman Steel in Granite City, Illinois. This gauge will be installed on a 72" Pickle Line and will be used to measure various types of steel alloys ranging from 0.040" to 0.500". We are excited to grow our relationship with Heidtman
- [A.G.T. Receives Second AGT400 Gauge Order from South Korea!](https://www.advgauging.com/a-g-t-receives-second-agt400-gauge-order-from-south-korea/) - Advanced Gauging technologies has just received an order for a second AGT400 Thickness Gauge from KSP Steel Company in Incheon, South Korea. This gauge will be installed on a 20-High Rolling Mill and will be used to measure various grades and thicknesses of stainless steel. We are excited to work with KSP Steel again and
- [Advanced Gauging Technologies Ships its first AGT400 to South Korea!](https://www.advgauging.com/advanced-gauging-technologies-ships-its-first-agt400-to-south-korea/) - Advanced Gauging Technologies has just shipped a brand new AGT400 Thickness Gauge to KSP Steel Company in Incheon, South Korea. This gauge will be installed on a 20-High Rolling Mill and will be used to measuring various grades and thicknesses of stainless steel. We are excited to work with KSP Steel and look forward to
- [A.G.T. Completes the Startup of a New AGT800 at Bilstein CRS!](https://www.advgauging.com/a-g-t-completes-the-startup-of-a-new-agt800-at-bilstein-crs/) - Advanced Gauging Technologies has just completed the startup of a brand new AGT800 at Bilstein Cold Rolled Steel in Bowling Green, Kentucky. This system is installed on a 54" Georg Slitter to measure carbon strip steel from 0.016 to 0.276". This is Bilstein's first gauge order from A.G.T. and we are looking forward to a
- [A.G.T. Works with OEM Line Mfg. to Ship AGT800 to PlatePlus in Granite City, Illinois!](https://www.advgauging.com/a-g-t-works-with-oem-line-mfg-to-ship-agt800-to-plateplus-in-granite-city-illinois/) - Advanced Gauging Technologies works with many OEM line manufacturers to implement thickness gauges onto lines before they are even installed. Because we work with these manufacturers directly they are able to design their lines with the perfect location for one of our thickness gauges. Such is the case with Plateplus Inc. in Granite City, Illinois.
- [A.G.T. Completes the Startup of our Third Pipe & Pole Gauge at McWane Industries!](https://www.advgauging.com/a-g-t-completes-the-startup-of-our-third-pipe-pole-gauge-at-mcwane-industries/) - Advanced Gauging Technologies has just completed the startup of a new AGT Pipe & Pole Gauging System to McWane Industries in Provo, Utah. This is our third Pipe & Pole system we have installed with McWane Industries in the last three years. McWane Ductile produces cast iron pipe and poles up to 16 feet long.
- [A.G.T. Ships New AGT800 to Bilstein CRS in Bowling Green, KY!](https://www.advgauging.com/a-g-t-ships-new-agt800-to-bilstein-crs-in-bowling-green-ky/) - Advanced Gauging Technologies has just shipped a brand new AGT800 to Bilstein Cold Rolled Steel in Bowling Green, Kentucky. This system will be installed on a 54" Georg Slitter to measure carbon strip steel from 0.016 to 0.276". This is Bilstein's first gauge order from A.G.T. and we look forward to a continued relationship for
- [New AGT400 Upgrade Shipped to Steel Tech in Canton, Michigan!](https://www.advgauging.com/new-agt400-shipped-to-steel-tech-in-canton-michigan/) - Advanced Gauging Technologies has just shipped a new AGT400 Upgrade to replace an outdated DMC 410 Thickness Gauge to Steel Technologies in Canton, Michigan. This will be the second AGT400 they have at this facility. The gauge will be installed on a 72" Braner Slitter and will measure various steel alloys up to .250" thick.
- [A.G.T. Completes an AGT400 Startup at Advanced Bearing Materials!](https://www.advgauging.com/a-g-t-completes-an-agt400-startup-at-advanced-bearing-materials/) - Advanced Gauging Technologies has just completed the startup of a new AGT400 Isotope Thickness Gauge at Advanced Bearing Materials, a Division of MIBA Bearings Group, LLC in Greensburg, Indiana. This system was installed on a 12" rolling mill and is being used to monitor coated steel strip alloys. A.G.T. builds thickness gauges to fit your
- [A.G.T. Receives its First Gauge Order from South Korea!](https://www.advgauging.com/a-g-t-receives-its-first-gauge-order-from-south-korea/) - Advanced Gauging Technologies has just received an order for a brand new AGT400 Thickness Gauge from KSP Steel Co. Ltd in Incheon, South Korea. This gauge will be installed on a 20-High Rolling Mill and will be used to measure various grades and thicknesses of stainless steel. We are excited to work with KSP Steel
- [Advanced Gauging Technologies Completes the Startup of Voss Industries 3rd AGT400!](https://www.advgauging.com/advanced-gauging-technologies-completes-the-startup-of-voss-industries-3rd-agt400/) - Advanced Gauging Technologies has just completed the startup of a brand new AGT400 Isotope Non-Contact Thickness Gauge at Voss Industries in Taylor, Michigan. This system is installed on a 74" slitter and measures various steel alloys up to .277 inches. This is Voss Industries third AGT400 and these gauges have proven to be extremely effective
- [A.G.T. Completes the Startup of a New AGT800 O-Frame for Vinyl Extrusion Line!](https://www.advgauging.com/a-g-t-completes-the-startup-of-a-new-agt800-o-frame-for-vinyl-extrusion-line/) - Advanced Gauging Technologies has just completed the startup of a brand new AGT800 O-Frame Gauge to a company in Jackson, Michigan. This system is being used on a vinyl siding extrusion line to measure material thickness, material width and embossing depth. The O-Frame Gauge closely monitors the vinyl siding produced to ensure each section is
- [Steel Technologies in Canton, MI Order a New AGT400 Upgrade!](https://www.advgauging.com/steel-technologies-in-canton-mi-order-a-new-agt400-upgrade/) - Advanced Gauging Technologies has just received an order for a new AGT400 upgrade of an obsolete DMC 410 Thickness Gauge at Steel Technologies in Canton, MI. This will be the second AGT400 they have at this facility. The gauge will be installed on a 72" Braner Slitter and will measure various steel alloys up to
- [A.G.T. Completes Startup of Two AGT400 Upgrades at California Steel!](https://www.advgauging.com/4656-2/) - Advanced Gauging Technologies has just completed the startup of two new AGT400 upgrades at California Steel in Fontana, CA to replace two outdated GR100 Isotope gauges. These gauges were installed on a CSM Slitter and CSM Temper Mill to measure various steel alloys. By replacing their existing GR100 gauges with AGT400 upgrades, California Steel will
- [A.G.T. Completes Startup of AGT800 O-Frame for Vinyl Siding Extrusion!](https://www.advgauging.com/a-g-t-completes-startup-of-agt800-o-frame-for-vinyl-siding-extrusion/) - Advanced Gauging Technologies has just completed the startup of a brand new AGT800 O-Frame at a company in Jackson, Michigan. This system is being used on a vinyl extrusion line and measures material thickness, material width and embossing depth. This gauge closely monitors the vinyl siding produced to ensure each section is meeting the strict
- [A.G.T. Ships New AGT400 to Voss Industries!](https://www.advgauging.com/a-g-t-ships-new-agt400-to-voss-industries/) - Advanced Gauging Technologies has just shipped a brand new AGT400 Isotope Non-Contact Thickness Gauge to Voss Industries in Taylor, Michigan. This system will be installed on a 74" slitter and will measure various steel alloys up to .277 inches. A.G.T. is the industry leader in non-contact thickness gauging and we service all our own gauges
- [A.G.T. Ships a New AGT400 to Advanced Bearing Materials!](https://www.advgauging.com/a-g-t-ships-a-new-agt400-to-advanced-bearing-materials/) - Advanced Gauging Technologies has just shipped a new AGT400 Isotope Thickness Gauge to Advanced Bearing Materials, a Division of MIBA bearings Group, LLC in Greensburg, Indiana. This system will be installed on a 12" rolling mill and will be used to monitor coated steel strip alloys. A.G.T. can custom build you a thickness gauge to
- [A.G.T. Ships Steel Dynamics Three New AGT400's!](https://www.advgauging.com/a-g-t-ships-steel-dynamics-three-new-agt400s/) - Advanced Gauging Technologies has just shipped three new AGT400 Isotope Thickness Gauges to Steel Dynamics in Columbus, MS. These are to be used on their newest plant expansion which is set to begin operation in the coming months. These gauges will be used on a 72" galvanizing line to measure various steel alloys from 0.010
- [Bilstein CRS Orders a New AGT800!](https://www.advgauging.com/bilstein-crs-orders-a-new-agt/) - Advanced Gauging Technologies has received an order for a new AGT800 at Bilstein Cold Rolled Steel in Bowling Green, Kentucky. This system will be installed on a 54" Georg Slitter to measure carbon strip steel from 0.016 to 0.276". This is Bilstein's first gauge order from A.G.T. and we look forward to a continued relationship
- [A.G.T. Ships McWane Ductile New AGT800 Pipe & Pole System!](https://www.advgauging.com/4620-2/) - Advanced Gauging Technologies has just shipped a new AGT800 Pipe and Pole System to McWane Ductile in Provo, Utah. This is the third system they have ordered in the last three years. McWane Ductile produces cast iron pipe and poles up to 16 feet long. This is a unique application that uses two opposing C-frames
- [Steel Technologies de Mexico in Pesqueria, NL Orders a New AGT400!](https://www.advgauging.com/4615-2/) - Advanced Gauging Technologies has just received an order for a new AGT400 Isotope Non-Contact Thickness gauge from Steel Technologies de Mexico in Pesqueria, NL. This system will be installed on a 54" slitter and will measure various CR, HR, HRPO, Galvanized and Galvalume materials with a thickness range from .006" to .040". A.G.T. is the
- [Voss Industries Orders a New AGT400!](https://www.advgauging.com/voss-industries-orders-a-new-agt400/) - Advanced Gauging Technologies has just received an order for a new AGT400 Non-Contact Thickness Gauge from Voss Industries in Taylor, Michigan. This system will be installed on a 74 inch slitter and will measure various steel alloys up to .277 inches. A.G.T. is the industry leader in non-contact thickness gauges and we service our own
- [A.G.T. Receives an Order for a New AGT400 from Advanced Bearing Materials!](https://www.advgauging.com/a-g-t-receives-an-order-for-a-new-agt400-from-advanced-bearing-materials/) - Advanced Gauging Technologies has just received a purchase order from Advanced Bearing Materials, a division of MIBA Bearings Group, LLC in McConnelsville, Ohio for a new AGT400 Isotope Thickness Gauge. This system will be installed on a 12" rolling mill and will be used to monitor coated steel strip alloys. No matter the size of
- [A.G.T. Ships Two New AGT400 Upgrades to California Steel!](https://www.advgauging.com/a-g-t-ships-two-new-agt400-upgrades-to-california-steel/) - Advanced Gauging Technologies has just shipped two new AGT400 upgrades to California Steel in Fontana, CA to replace two outdated GR100 Isotope gauges. These gauges will be installed on a CSM Slitter and CSM Temper Mill to measure various steel alloys. By replacing their existing GR100 gauges with AGT400 upgrades, California Steel will be able
- [A.G.T. Completes Startup of New AGT400 Upgrade at Steel Tech in Portage, IN!](https://www.advgauging.com/a-g-t-completes-startup-of-new-agt400-upgrade-at-steel-tech-in-portage-in/) - Advanced Gauging Technologies has just completed the startup of a new AGT400 upgrade to replace an outdated Global/5310 gauge at Steel Technologies in Portage, Indiana. This gauge was installed on a 60" Braner slitting line and will measure various steel alloys up to .250" thick. By replacing their old gauge, Steel Technologies will be able
- [A.G.T.  Completes the Startup of New AGT800 at Steel Tech in Ghent, KY!](https://www.advgauging.com/a-g-t-s/) - Advanced Gauging Technologies has just completed the startup of a new AGT800 Laser Thickness Gauge at Steel Technologies in Ghent, Kentucky. This system is located on a 72" Braner slitting line to measure aluminum and various steel alloys from .025" to .250". Steel Technologies currently operates more than 30 of our AGT400 gauges nationwide and
- [A.G.T. Completes the Startup of a New AGT400 at Jemison Metals!](https://www.advgauging.com/a-g-t-completes-the-startup-of-a-new-agt400-at-jemison-metals/) - Advanced Gauging Technologies has just completed the startup of a new AGT400 Isotope Thickness Gauge at Jemison Metals in Madison Heights, Virginia. This system will be used on a 72" Herr-Voss Stamco C-T-L Stretch Leveler to measure various steel alloys. This is Jemison Metal's 9th gauge they have ordered from A.G.T. and we're happy to
- [A.G.T. Completes the Startup of a New AGT800 at Fulton County Processing!](https://www.advgauging.com/a-g-t-completes-the-startup-of-a-new-agt800-at-fulton-county-processing/) - Advanced Gauging Technologies has just completed the startup of a new AGT800 at Fulton County Processing in Delta, Ohio. This system was installed on a 72" Alcos slitting line to measure carbon steel from 0.049" to 0.500". Fulton County currently operates five A.G.T. gauges they have purchased from us. They are running three AGT400s on
- [A.G.T. Ships Jemison Metals a New AGT400!](https://www.advgauging.com/a-g-t-ships-jemison-metals-a-new-agt400/) - Advanced Gauging Technologies has just shipped a new AGT400 Isotope Thickness Gauge to Jemison Metals in Madison Heights, Virginia. This system will be used on a 72" Herr-Voss Stamco C-T-L Stretch Leveler to measure various steel and aluminum alloys. This will be Jemison Metal's 9th gauge they have ordered from A.G.T. and we're happy to
- [A.G.T. Ships AGT800 O-Frame for Vinyl Siding Extrusion!](https://www.advgauging.com/a-g-t-ships-agt800-o-frame-for-vinyl-siding-extrusion/) - Advanced Gauging Technologies has just shipped a brand new AGT800 O-frame to a company in Jackson, Michigan. This system will be used on a vinyl siding extrusion line to measure material thickness, material width and embossing depth. This gauge closely monitors the vinyl siding produced to ensure each section is meeting the strict tolerances set
- [A.G.T. Works with OEM Line Mfg. to Provide AGT800 to PlatePlus Inc. in Granite City, Illinois!](https://www.advgauging.com/a-g-t-works-with-oem-line-mfg-to-provide-agt800-to-plateplus-inc-in-granite-city-illinois/) - Advanced Gauging Technologies works with many OEM line manufacturers to implement thickness gauges onto lines before they are even installed. Because we work with these manufacturers directly they are able to design their lines with the perfect location for one of our thickness gauges. Such is the case with Plateplus Inc. in Granite City, Illinois.
- [California Steel Orders Two New AGT400 Upgrades!](https://www.advgauging.com/california-steel-orders-two-new-agt400-upgrades/) - Advanced Gauging Technologies has just received an order for two new AGT400 upgrades at California Steel in Fontana, CA to replace two outdated GR100 Isotope gauges. These gauges will be installed on a CSM Slitter and CSM Temper Mill to measure various steel alloys. By replacing their existing GR100 gauges with AGT400 upgrades, California Steel
- [A.G.T. Starts Up another AGT400 Upgrade!](https://www.advgauging.com/a-g-t-starts-up-another-agt400-upgrade/) - Advanced Gauging Technologies has just completed the startup of another new AGT400 upgrade at Samuel Doral Steel in Toledo, Ohio to replace an outdated GR100 Isotope gauge. This gauge is now installed on an 80" Paxson slitter and will measure various steel alloys up to .250" thick. By replacing their GR100 gauge with an AGT400
- [Steel Dynamics Orders Three New AGT400's!](https://www.advgauging.com/steel-dynamics-orders-three-new-agt400s/) - Advanced Gauging Technologies, L.L.C. has received an order for three new AGT400 Isotope Thickness Gauges from Steel Dynamics in Columbus, MS. These are to be used on their newest plant expansion which is set to begin operation in early 2020. These gauges will be used on a 72" galvanizing line to measure various steel alloys
- [A.G.T. Ships New AGT800 to Steel Tech in Ghent, KY!](https://www.advgauging.com/a-g-t-ships-new-agt800-to-steel-tech-in-ghent-ky/) - Advanced Gauging Technologies has just shipped a new AGT800 Laser Thickness Gauge to Steel Technologies in Ghent, Kentucky. This system will be used on a 72" Braner slitting line to measure aluminum and various other steel alloys form .025" to .250". Steel Technologies currently operates more than 30 of our AGT400 Gauges nationwide and this
- [A.G.T. Exhibits at AISTech Pittsburgh 2019!](https://www.advgauging.com/a-g-t-exhibits-at-aistech-pittsburgh-2019/) - Last week Advanced Gauging Technologies exhibited at AISTech 2019, Steel's Premier Technology Event. This year the show took place in the David L Lawrence Convention Center in the heart of downtown Pittsburgh, Pennsylvania. This is the world's largest annual steel conference and exposition, and A.G.T. had its own booth to showcase the incredible capabilities of
- [McWane Ductile Orders New AGT800 Pipe and Pole System!](https://www.advgauging.com/mcwane-ductile-orders-new-agt800-pipe-and-pole-system/) - McWane Ductile in Provo, Utah has just ordered a new AGT800 Pipe and Pole System. This is the third system they have ordered in the last three years. McWane Ductile produces cast iron pipe and poles up to 16 feet long. This is a unique application that uses two opposing C-frames to oscillate in and
- [Jemison Metals Orders a New AGT400!](https://www.advgauging.com/jemison-metals-orders-a-new-agt400/) - Advanced Gauging Technologies has received a purchase order from Jemison Metals in Madison Heights, Virginia for new AGT400 Isotope Thickness Gauge. This system will be used on a 72" Herr-Voss Stamco C-T-L Stretch Leveler to measure various steel and aluminum alloys. This will be Jemison Metal's 9th gauge they have ordered from A.G.T. and we're
- [Advanced Gauging Technologies Receives its Second Patent!](https://www.advgauging.com/advanced-gauging-technologies-receives-its-second-patent/) - Advanced Gauging Technologies is happy to announce we have now received our second patent for one of our products. We strive to be on the forefront of innovation and are always looking for ways to improve what we do. Being a leader in non-contact thickness measurement is a responsibility we don't take lightly and that's
- [A.G.T. Ships New AGT400 Upgrade to Steel Tech in Portage, IN!](https://www.advgauging.com/a-g-t-ships-new-agt400-upgrade-to-steel-tech-in-portage-in/) - Advanced Gauging Technologies has just shipped a new AGT400 upgrade to replace an outdated Global/5310 gauge at Steel Technologies in Portage, Indiana. This gauge will be installed on a 60" Braner slitting line and will measure various steel alloys up to .250" thick. By replacing their old gauge, Steel Technologies will be able to reduce
- [A.G.T. Ships New AGT800 to Fulton County Processing!](https://www.advgauging.com/a-g-t-ships-new-agt800-to-fulton-county-processing/) - Advanced Gauging Technologies has shipped a new AGT800 to Fulton County Processing in Delta, Ohio. This system will be used on a 72" Alcos slitting line to measure carbon steel from 0.049 to 0.500". Fulton County currently operates five A.G.T. gauges they have purchased from us. They are running three AGT400s on various slitting lines
- [Steel Technologies in Portage, IN Orders New AGT400 Upgrade!](https://www.advgauging.com/steel-technologies-in-portage-in-orders-new-agt400-upgrade/) - Advanced Gauging Technologies has received an order for a new AGT400 upgrade of an outdated Global/5310 gauge at Steel Technologies in Portage, Indiana. This gauge will be installed on a 60" Braner slitting line and will measure various steel alloys up to .250" thick. By replacing their old gauge, Steel Technologies will be able to
- [A.G.T. Announces our Newsletter Prize Winners!](https://www.advgauging.com/a-g-t-announces-our-newsletter-prize-winners/) - Last month Advanced Gauging Technologies challenged our Company Newsletter readers with a Sudoku puzzle. The first five people to send in the correctly filled out puzzle were the winners and will be receiving a surprise gift from A.G.T.! We would like to congratulate the following people on being the first five to complete this puzzle
- [Celebrating our Vice President's 20th Anniversary!](https://www.advgauging.com/celebrating-our-vice-presidents-20th-anniversary/) - Wife of our co-founder, and mother of our President, Coralie Cook officially joined A.G.T. in January of 1999. She is celebrating her 20th anniversary as vice-president and has played a crucial role in helping A.G.T. to become the success that it is today. Over the years our company has changed, innovated and grown immensely thanks
- [As the Industry Grows, So Grows A.G.T.](https://www.advgauging.com/as-the-industry-grows-so-grows-a-g-t/) - With a strong economy the steel industry has been working diligently to stay ahead of demand and take advantage of this growth. This has led many of A.G.T.'s customers to be busier than they have been in years. With unemployment rates so low, it can be a challenge finding quality employees to meet this demand.
- [Celebrating Over 20 Years of Service with One of our First Gauges!](https://www.advgauging.com/celebrating-over-20-years-of-service-with-one-of-our-first-gauges/) - At Advanced Gauging Technologies we pride ourselves on the quality of workmanship that is put into our wide variety of products. Everything is built and manufactured right here in the USA and we intend to keep it that way. In December 1998, our co-founder and president Scott Cook completed the startup of one of the
- [Second AGT800 Pipe & Pole Startup at McWane Ductile](https://www.advgauging.com/second-agt800-pipe-pole-startup-at-mcwane-ductile/) - Advanced Gauging Technologies has just completed the startup of a new AGT800 Pipe and Pole System at McWane Ductile in Coshocton, Ohio. They produce cast iron pipe and poles up to 16 feet long and this is the second system they have purchased in the last two years. This is a unique application that uses
- [A.G.T. Attends Fabtech Atlanta!](https://www.advgauging.com/a-g-t-attends-fabtech-atlanta/) - This week Advanced Gauging Technologies attended Fabtech in Atlanta, Georgia. This is the largest metal forming, fabricating, welding and finishing event in North America and was held at the Georgia World Congress Center. Members of our sales and marketing teams went to see all the latest and greatest the industry has to offer as well
- [A.G.T.'s Kevin Gee Transitions to Sales and Service!](https://www.advgauging.com/a-g-t-s-kevin-gee-transitions-to-sales-and-service/) - As Advanced Gauging Technologies continues to grow and evolve we realize just how capable every one of our employees are. Their skill sets can serve many functions and as such we want everyone here to have the opportunity to grow alongside the company. We believe this growth fosters innovation and has helped A.G.T. to become
- [Celebrating Over 20 Years of Service from one of our First Gauges](https://www.advgauging.com/celebrating-over-20-years-of-service-from-one-of-our-first-gauges/) - At Advanced Gauging Technologies we pride ourselves on the quality of workmanship that is put into our wide variety of products. Everything is designed and manufactured right here in the USA and we intend to keep it that way. In October 1998 we completed the startup of two of the first AGT400's for Accuride International
- [We're Always Here When You Need Us!](https://www.advgauging.com/were-always-here-when-you-need-us/) - For more than 20 years Advanced Gauging Technologies has been known industry wide to design and manufacture the best non-contact thickness gauges available. We also provide exceptional service and support which is something our customers truly appreciate. When our customers have an issue, it is critical that they get back up and running as fast
- [AGT400 Startup at Jemison Metals!](https://www.advgauging.com/agt400-startup-at-jemison-metals/) - Advanced Gauging Technologies has completed the startup of a new AGT400 at Jemison Metals in Birmingham, Alabama. This system will be used on a 61" Rowe CTL line to measure various steel alloys up to .250" thick. With the installation of this gauge Jemison Metals will be able to reduce downtime, improve efficiency, as well
- [A.G.T. Ships New Pipe and Pole System to McWane Ductile!](https://www.advgauging.com/a-g-t-ships-new-pipe-and-pole-system-to-mcwane-ductile/) - Advanced Gauging Technologies has just shipped a new AGT800 Pipe and Pole System to McWane Ductile in Coshocton, Ohio. This is the second system they have ordered in the last two years. McWane Ductile produces cast iron pip and poles up to 16 feet long. This is a unique application that uses two opposing C-frames
- [New AGT800 Startup at Steel Technologies in Smyrna, TN!](https://www.advgauging.com/new-agt800-startup-at-steel-technologies-in-smyrna-tn/) - Advanced Gauging Technologies has completed the startup of a new AGT800 laser thickness gauge at Steel Technologies in Smyrna, Tennessee. The custom built C-frame is specifically designed for use on their 84" Braner slitter. This laser thickness gauge is used to measure aluminum and various steel alloys with a thickness range of .009" to .187".
- [New AGT400 Upgrade Startup at Harvard Coil Processing!](https://www.advgauging.com/new-agt400-upgrade-startup-at-harvard-coil-processing/) - Advanced Gauging Technologies has completed the startup of a new AGT400 Upgrade at Harvard Coil Processing in Cleveland, Ohio. This upgrade replaced an outdated GR200 thickness gauge and is installed on a 76" Braner slitting line that measures various steel alloys up to .250" thick. By replacing their outdated thickness gauge with a new
- [A.G.T. Ships Another AGT400 Upgrade!](https://www.advgauging.com/a-g-t-ships-another-agt400-upgrade/) - Advanced Gauging Technologies has shipped a new AGT400 upgrade to Samuel Doral Steel in Toledo, Ohio to replace an outdated GR200 gauge. This gauge will be installed on an 80" Paxson slitter and will measure various steel alloys up to .250" thick. By replacing their GR100 gauge with an AGT400 upgrade, Samuel Doral will
- [A.G.T. Ships New AGT400 to Jemison Metals!](https://www.advgauging.com/a-g-t-ships-new-agt400-to-jemison-metals/) - Advanced Gauging Technologies has shipped a new AGT400 Isotope Thickness Gauge to Jemison Metals in Birmingham, Alabama. This system will be used on a 61" Rowe CTL line to measure various steel alloys up to .250" thick. This will be Jemison Metals' eighth gauge purchased from A.G.T.
- [A.G.T. Ships a New AGT400 Upgrade!](https://www.advgauging.com/a-g-t-ships-an-agt400-upgrade/) - Advanced Gauging Technologies has shipped a new AGT400 upgrade to Harvard Coil Processing in Cleveland, Ohio. This upgrade will replace an outdated GR200 gauge and will be installed on a 76" Braner slitting line that will measure various steel alloys up to .250" thick. By replacing their outdated thickness gauge with a new AGT400 upgrade,
- [Shipping a New AGT400 Upgrade to Samuel Doral Steel!](https://www.advgauging.com/shipping-a-new-agt400-upgrade-to-samuel-doral-steel/) - Advanced Gauging Technologies has shipped a new AGT400 upgrade to Samuel Doral Steel in Toledo, Ohio. This gauge will be installed on an 80” Paxton slitter and will measure various steel alloys up to .250” thick. By replacing their GR100 gauge, Samuel Doral will be able to reduce downtime, improve efficiency and provide the most
- [Steel Technologies Purchases New AGT800 From A.G.T.!](https://www.advgauging.com/steel-technologies-purchases-new-agt800-from-a-g-t/) - Advanced Gauging Technologies has received a purchase order for a new AGT800 Laser Thickness Gauge from Steel Technologies in Ghent, Kentucky. This system will be used on a 72" Braner slitting line to measure aluminum and various steel alloys from .025 to .250". Steel Technologies currently operates more than 30 of our AGT400 gauges nationwide
- [Harvard Coil Processing Orders an AGT400 Upgrade!](https://www.advgauging.com/harvard-coil-processing-orders-an-agt400-upgrade/) - Advanced Gauging Technologies has received an order for a new AGT400 upgrade from Harvard Coil Processing in Cleveland, Ohio. This gauge upgrade will be installed on a 76" Braner slitting line and will measure various steel alloys up to .250" thick. By replacing their outdated GR200 gauge, Harvard will be able to reduce downtime, improve
- [Celebrating 20 Years of Service with One of our Original Gauges!](https://www.advgauging.com/celebrating-20-years-of-service-with-one-of-our-original-gauges/) - At Advanced Gauging Technologies we pride ourselves on the quality of workmanship that is put into our wide variety of products. Everything is built and manufactured right here in the USA and we intend to keep it that way. In September 1998, Scott Cook, our co-founder, completed the startup of one of the first AGT400's
- [Celebrating 20 Years of Service from One of our First Gauges!](https://www.advgauging.com/celebrating-20-years-of-service-from-one-of-our-first-gauges/) - At Advanced Gauging Technologies we pride ourselves on the quality of workmanship that is put into our wide variety of products. Everything is built and manufactured right here in the USA and we intend to keep it that way. In August 1998, Ron Cook, our co-founder, completed the startup of the first AGT400 for Seymour
- [Fulton County Processing Purchases New AGT800 from A.G.T.!](https://www.advgauging.com/fulton-county-processing-purchases-new-agt800-from-a-g-t/) - Advanced Gauging Technologies has received a purchase order for a new AGT800 Laser Thickness Gauge from Fulton County Processing in Delta, Ohio. This system will be used on a 72" Alcos slitting line to measure carbon steel from 0.049 to 0.500". Fulton County currently operates five A.G.T. gauges they have purchased from us. They are
- [AGT400 Upgrade at Samuel Doral Steel in Toledo!](https://www.advgauging.com/agt400-upgrade-at-samuel-doral-steel-in-toledo/) - Advanced Gauging Technologies has received an order for a new AGT400 upgrade of an outdated GR100 Isotope gauge at Samuel Doral Steel in Toledo, Ohio. This gauge will be installed on an 80" Paxson slitter and will measure various steel alloys up to .250" thick. By replacing their GR100 gauge Samuel Doral will be able
- [The Perfect Solution with Laser Technology](https://www.advgauging.com/the-perfect-solution-with-laser-technology/) - Advanced Gauging Technologies continues to be a leader in the thickness gauging industry and is proud to offer a variety of measurement options to suit your needs. As time progress we are finding an increased demand for the use of laser technology, and we have proven its benefits through our AGT800 and AGT600 Laser Thickness
- [If You Can Dream it We Can Build it!](https://www.advgauging.com/if-you-can-dream-it-we-can-build-it/) - At Advanced Gauging Technologies we know that every business is different, and as such each has different needs and requirements that allow them to flourish. A.G.T. has the ability to custom tailor our non-contact thickness measurement solutions to your exact specifications and ensure you can get the job done right the first time. We specialize
- [A.G.T. Ships New AGT800!](https://www.advgauging.com/a-g-t-ships-new-agt800/) - Advanced Gauging Technologies shipped a new AGT800 to a local service center for use on a tandem mill to measure material from 0.020 to 0.375". This gauge will be used to measure the thickness of various steel alloys with different surface finishes. The AGT800 provides the most reliable, accurate and consistent thickness measurement available on
- [New AGT800 Startup at Nova Steel!](https://www.advgauging.com/new-agt800-startup-at-nova-steel/) - Advanced Gauging Technologies has completed the startup of a new AGT800 laser thickness gauge at Nova Steel Inc. in Stoney Creek, Ontario. This non-contact thickness measuring system was installed on a 72" Athader slitter and measures steel up to .380" thick. Nova Steel offers an extensive range of steel products and solutions so an AGT800
- [Jemison Metals Orders a New AGT400](https://www.advgauging.com/4165-2/) - Advanced Gauging Technologies has received a purchase order from Jemison Metals in Birmingham, Alabama for a new AGT400 Isotope Thickness Gauge. This system will be used on a 61" Rowe CTL line to measure various steel alloys up to .250" thick. This will be Jemison Metals' eighth gauge and delivery is scheduled for October of
- [A.G.T. Keeps your Equipment Running Efficiently!](https://www.advgauging.com/a-g-t-keeps-your-equipment-running-efficiently/) - Advanced Gauging Technologies wants to ensure that all our customers can operate their gauges in the most efficient way possible. It helps with your bottom line and that’s our number one goal. To safeguard that, A.G.T. provides complimentary software upgrades to our equipment free of charge each time we are scheduled for service at your
- [A.G.T. Celebrates the 20th Anniversary of their First Gauge Commissioning!](https://www.advgauging.com/a-g-t-celebrates-the-20th-anniversary-of-their-first-gauge-commissioning/) - Advanced Gauging Technologies is celebrating the 20th anniversary of their first thickness gauge commissioning by offering a unique, limited time opportunity. Receive 20% off all parts on a "Tune-Up" for older A.G.T. gauges or a complete "Gauge Upgrade" for obsolete gauges. Tune-Up you existing A.G.T. gauge's older electronic components with new State-of-the-Art replacements. Upgrade your
- [Advanced Gauging Technologies Complete Startup of a New AGT800!](https://www.advgauging.com/advanced-gauging-technologies-complete-startup-of-a-new-agt800/) - Advanced Gauging Technologies has completed the startup of a new AGT800 laser thickness gauge at Olympic Steel in Detroit, Michigan. The AGT800 has a custom-built hanging C-frame designed for use on a 72" Niagra Slitter. The gauge will be used to measure aluminum with a thickness range of .015" to .130" and will provide Olympic
- [A.G.T. Completes Startup of New AGT800 at National Galvanizing in Monroe, MI](https://www.advgauging.com/a-g-t-completes-startup-of-new-agt800-at-national-galvanizing-in-monroe-mi/) - Advanced Gauging Technologies has completed the startup of a new AGT800 at National Galvanizing in Monroe, Michigan. This gauge is installed on a 72" Pro-Eco pickle line and will be used to measure galvanized and various steel alloys up to .500" thick. Earlier this year National Galvanizing purchased an AGT400 upgrade to replace an obsolete
- [Another Successful Gauge Startup at JMS Russel Metals](https://www.advgauging.com/another-successful-gauge-startup-at-jms-russel-metals/) - Advanced Gauging Technologies has successfully completed another gauge startup at JMS Russel Metals in Blytheville, Arkansas. Our AGT400 is replacing an outdated GR200 thickness gauge and is installed on a 64" Stamco Slitter and will measure material up to .250" thick. This Blytheville plant processes various steel alloys, and with our gauge upgrade JMS can
- [A.G.T. Ships AGT400 Upgrade to JMS Russel Metals in Blytheville, AR](https://www.advgauging.com/a-g-t-ships-agt400-upgrade-to-jms-russel-metals-in-blytheville-ar/) - Advanced Gauging Technologies has shipped a new AGT400 to replace an obsolete GR200 thickness gauge at JMS Russel Metals in Blytheville, Arkansas. This gauge will be installed on a 64" Stamco Slitter and measure material up to .250" thick. At this Blytheville location,they process various steel alloys. With this AGT400 isotope thickness gauge upgrade, JMS
- [Jackson, Michigan Company Places an Order for a New AGT1000](https://www.advgauging.com/jackson-michigan-company-places-an-order-for-a-new-agt1000/) - Advanced Gauging Technologies has received a purchase order for a new AGT1000 from a Jackson, Michigan company. This system will be installed on a vinyl extrusion line to measure material thickness, material width and embossing depth. This gauge closely monitors the material produced to ensure each sections meets the customer's strict tolerance requirements.
- [McWane Ductile Orders New AGT800 Pipe and Pole System](https://www.advgauging.com/4096-2/) - McWane Ductile in Coshocton, Ohio has ordered a new AGT800 Pipe and Pole system. This is the second system they have ordered in the last two years. McWane Ductile Produces cast iron pipe and pole up to 18 feet long. This is a unique application that uses two opposing C-frames to oscillate in and out
- [First AGT1000 Startup](https://www.advgauging.com/first-agt1000-startup/) - Advanced Gauging Technologies has recently completed the startup of our first AGT1000 in Santa Clarita, California. The gauge is installed on a 30" conveyor system and will measure material from .003 to .500" thick. This company processes and distributes various packs, panels and shims used primarily in the aerospace industry, so the O-frame design of
- [National Galvanizing AGT400 Upgrade Startup](https://www.advgauging.com/national-galvanizing-agt400-upgrade-startup/) - Advanced Gauging Technologies recently completed the startup of an AGT400 upgrade to replace an outdated GR100 thickness gauge at National Galvanizing in Monroe, Michigan. This gauge is installed on a 60" Pro-Eco Slitter and will measure material up to .250" thick. The Monroe plant processes various steel alloys and has the ability to pickle, galvanize,
- [A.G.T. to Attend AISTech in Philidelphia](https://www.advgauging.com/a-g-t-to-attend-aistech-in-philidelphia/) - Advanced Gauging Technologies will be attending AIST's Iron and Steel Technology Conference and Exposition May 7th though the 10th at the Pennsylvania Convention Center in Philadelphia, PA. This is the world's largest annual steel conference and exposition, and A.G.T. will be in booth 1614 with our laser gauge technology, showcasing the incredible capabilities of our
- [Shipping a New AGT800 to Olympic Steel in Detroit, MI](https://www.advgauging.com/shipping-a-new-agt800-to-olympic-steel-in-detroit-mi/) - Advanced Gauging Technologies shipped a new AGT800 laser thickness gauge to Olympic Steel in Detroit, Michigan. The new AGT800 has a custom-built C-frame specifically designed for use on a 72" Niagra Slitter. This gauge will be used to measure aluminum with a thickness range of .015" to .130". Our AGT800 will provide Olympic Steel the
- [A.G.T. Ships New AGT800 to National Galvanizing in Monroe, MI](https://www.advgauging.com/a-g-t-ships-new-agt800-to-national-galvanizing-in-monroe-mi/) - Advanced Gauging Technologies has shipped a new AGT800 laser thickness gauge to National Galvanizing in Monroe, Michigan. This gauge will be installed on a 72" Pro-Eco pickle line to measure galvanized and various steel alloys up to .500" thick. This is the second gauge purchase National Galvanizing has made this year and startup is scheduled
- [A.G.T. Ships New AGT800 to Steel Technologies in Smyrna, TN](https://www.advgauging.com/a-g-t-ships-new-agt800-to-steel-technologies-in-smyrna-tn/) - This week Advanced Gauging Technologies will be shipping a new AGT800 laser thickness gauge to Steel Technologies in Smyrna, Tennessee. This will be Smyrna's first AGT800, and Steel Technologies 32nd A.G.T. gauge. It has a custom-built C-frame specifically designed for use on an 84" Braner Slitter. At this location they will be use their gauge
- [Steel Technologies - Pesqueria Startup](https://www.advgauging.com/steel-technologies-pesqueria-startup/) - Steel Technologies in Pesqueria, Nuevo LeÓn, Mexico recently commissioned a new AGT400 isotope thickness gauge. This gauge is installed on a 72" Braner Multi-Blanking line and will measure the thickness of stainless steel and aluminum with a thickness range of .250" to .380". This will be this location's third A.G.T. non-contact thickness gauge. Steel Technologies now
- [National Galvanizing Order New AGT800](https://www.advgauging.com/national-galvanizing-order-new-agt800/) - Advanced Gauging Technologies has received a purchase order from National Galvanizing in Monroe, Michigan for a new AGT800 laser thickness gauge. This system will be used on a 72" Pro-Eco pickle line to measure galvanized and various steel alloys up to .500" thick. This is National Galvanizing's second gauge purchase this year and delivery is
- [Olympic Steel Orders New AGT800 Laser Thickness Gauge](https://www.advgauging.com/olympic-steel-orders-new-agt800-laser-thickness-gauge/) - Advanced Gauging Technologies has received an order for a new AGT800 laser thickness gauge from Olympic Steel's Detroit, Michigan plant. This system will be used on a 72" Niagra slitting line where it will measure aluminum from .015" to .130" thick for the automotive market. Delivery and installation is scheduled for May of 2018. This
- [A.G.T. Ships First AGT1000](https://www.advgauging.com/g-t-ships-first-agt1000/) - This week Advanced Gauging Technologies shipped its first AGT1000 to Santa Clarita, California where a shim technology company processes and distributes various packs, panels and shims used primarily in the aerospace industry. The AGT1000 will be installed on a 30" conveyor system and will measure material from .003" to .500". The O-frame design allows easy,
- [Another Successful Gauge Startup](https://www.advgauging.com/another-successful-gauge-startup/) - This week Advanced Gauging Technologies completed a startup for a new AGT800. The gauge was installed on a Chicago Rolling Mill that is capable of processing 18" wide material with a thickness range of .020" to .250". The AGT800 will be replacing an obsolete Pratt & Whitney contact gauge to ensure strict tolerance specifications can
- [A Growing Market](https://www.advgauging.com/a-growing-market/) - As Metal Center News magazine recently stated, Steel Technologies’ Pesqueria, Nuevo Leon, Mexico facility was supplied with a new Andritz Herr-Voss Stamco multi-blanking line. This line is capable of handling a coil capacity of 60,000 pounds and processes 74-inch-wide material. At this facility, Steel Technologies conducts a variety of services including: slitting, multi-blanking and EPS
- [Voss Industries AGT400 Startup](https://www.advgauging.com/voss-industries-agt400-startup/) - Voss Industries in Taylor, Michigan recently commissioned a new AGT400. This isotope thickness gauge is installed on a 72” pickle line and measures the thickness of various steel alloys up to .250”. This is Voss’ second AGT400.
- [Nova Steel Orders Third Laser Gauge](https://www.advgauging.com/nova-steel-orders-third-laser-gauge/) - Nova Steel, Inc. in Stoney Creek, Ontario has purchased another AGT800 laser thickness gauge. This non-contact thickness measuring system will be installed on a 72” Athader slitter and measure steel with a thickness up to .380.” This is Nova’s third AGT800.
- [Midwest Tube Mills Startup](https://www.advgauging.com/midwest-tube-mills-startup/) - Midwest Tube Mills, Inc in Madison, Indiana recently commissioned a new AGT400. This isotope thickness gauge is installed on a 60" Braner slitter and measures carbon steel up to .160" thick.
- [Behind the Software](https://www.advgauging.com/behind-the-software/) - As A.G.T. continues to grow as a company we have taken on more complex projects in order to serve the growing needs of our customers. Because of this, it is vital that our staff can manage these growing demands and exceed every expectation. That led us to the hiring of our newest Software Developer, John
- [ALUMINUM USA](https://www.advgauging.com/aluminum-usa/) - We enjoyed seeing and making new friends at Aluminum USA in Nashville last week!
- [Annual Radiation Training](https://www.advgauging.com/annual-radiation-training-2/) - A.G.T. stays up to date on safety regulations and radioactive material handling procedures by completing an annual radiation training course. Every employee attends the one day seminar, giving all of us additional tools to handle hazardous material properly as well as answer questions or address concerns that customers have regarding topics on radiation.
- [A.G.T. Ships Third AGT800 to Nova Steel](https://www.advgauging.com/g-t-ships-third-agt800-nova-steel/) - A third AGT800 laser gauge was recently shipped to Stoney Creek, ON where Nova Steel processes and distributes carbon steel, stainless steel and aluminum products. This gauge has a custom C-frame specifically designed for use on a 72" Athader Slitter and will be used to measure various steel alloys with a thickness range of .050"
- [Steel Technologies Order New AGT800](https://www.advgauging.com/steel-technologies-order-new-agt800/) - Steel Technologies in Smyrna, Tennessee has purchased an AGT800 to be used on their 84” Braner Slitter. This laser thickness gauge will measure aluminum and various steel alloys up to .187” thick. The products from this line will be utilized by various automotive companies and auto suppliers in their region. This will be Steel Technologies’
- [Committed to Service](https://www.advgauging.com/committed-to-service/) - A.G.T. has worked diligently to provide the best customer service in the business. We continuously work to prevent problems before they occur, so our customers always remain efficient and productive. A.G.T. is able to accomplish this through a simple, but incredibly effective manner: communication. Each department works together to ensure we are providing effective solutions
- [In the Field](https://www.advgauging.com/in-the-field/) - As A.G.T. grows, so too does our staff. Three of our most recent additions started with us in November and have already become well versed in A.G.T.’s quality, attention to detail and customer service. This week, our newest Field Service Technician is on the road alongside veteran technicians performing semi-annual service. Next week our Marketing
- [AGT400 Ships To Midwest Tube Mills](https://www.advgauging.com/2920-2/) - A new AGT400 thickness gauge has been shipped to Midwest Tube Mills, Inc in Madison, Indiana. The gauging system will be used on their 60” Braner slitter and measure carbon steel up to .160” thick.
- [Happy & Healthy Company](https://www.advgauging.com/happy-healthy-company/)
- [Happy Thanksgiving!](https://www.advgauging.com/happy-holidays-2/) - We will be closed on Thursday, November 23rd.
- [A.G.T. Ships Third AGT800 to Plant In Bridgeport](https://www.advgauging.com/a-g-t-ships-third-agt800-to-feroleto-steel/) - Another AGT800 laser gauge was recently shipped to Bridgeport, CT. This gauge has a custom C-frame specifically designed for use on an 18” Chicago Rolling Mill and will be used to measure various steel alloys with a thickness range of .020 to .250”.
- [Two AGT400s Installed](https://www.advgauging.com/two-agt400s-installed/) - Greenpoint Metals in Franklin, Ohio is now home to two new AGT400 isotope thickness gauges. The gauges are installed on 72” Pro-Eco and Stamco slitters and measure various steel alloys with a thickness range of .014 to .250”. They replaced obsolete Global x-ray gauges.
- [Another AGT400 Thickness Gauge Ships To Voss](https://www.advgauging.com/another-agt400-thickness-gauge-ships-to-voss/) - A second AGT400 has been shipped to Voss in Taylor, Michigan. This isotope thickness gauge will be installed on a 72” pickle line and measure the thickness of various steel alloys up to .250”.
- [FABTECH 2017](https://www.advgauging.com/fabtech-2017/) - Who else will be visiting McCormick Place in Chicago this week?
- [Two New AGT400s Commissioned at Greenpoint - Franklin](https://www.advgauging.com/two-new-agt400s-commissioned-at-greenpoint-franklin/) - Two new AGT400 thickness gauges have been commissioned at Greenpoint Metals in Franklin, OH. They are replacing older Global x-ray gauges and will be located on 72” Stamco and Pro-Eco slitting lines. Both will be used to measure various steel alloys with an overall thickness range of .015 to .250”. Greenpoint now has three AGT400
- [Did you visit METALCON?](https://www.advgauging.com/did-you-visit-metalcon/) - We enjoyed meeting new friends at METALCON in Las Vegas this week. If you missed it, you can always visit ALUMINUM USA in Nashville next week.
- [Two AGT400s Ship To Greenpoint Metals, Inc.](https://www.advgauging.com/two-agt400s-ship-to-greenpoint-metals-inc/) - Two brand new AGT400 isotope thickness gauges are in transit to Greenpoint Metals, Inc. in Franklin, Ohio. Both gauges will be used on 72” Pro-Eco and Stamco slitters and measure various steel alloys with a thickness range of .014 to .250”.
- [Eighth AGT400 Installed At Heidtman Steel](https://www.advgauging.com/eighth-agt400-installed-at-heidtman-steel/) - Heidtman Steel Products in Butler, Indiana adds its eighth AGT400 to operations. This isotope gauge is installed on a temper mill and measures steel with a thickness up to .250”.
- [Midwest Tube Orders AGT400](https://www.advgauging.com/midwest-tube-orders-agt400/) - Midwest Tube Mills, Inc. has purchased an AGT400 to be used on their 60” Braner slitter. This new thickness gauge will measure carbon steel up to .160”.
- [New AGT400 Commissioned at Greenpoint Metals](https://www.advgauging.com/new-agt400-commissioned-at-greenpoint-metals/) - An AGT400 upgrade has been commissioned at Greenpoint Metals in Camden, OH. This new system replaces an obsolete BSK gauge located on a 72” Pro-Eco slitting line and will be used to measure various steel alloys with a thickness range of .010 to .250”. This is Greenpoint’s first AGT400. Two more AGT400s are scheduled to
- [AGT400 Commissioned At Charter Steel](https://www.advgauging.com/agt400-commissioned-at-charter-steel/) - Charter Steel is now running their first AGT400 (replacing an obsolete Gamma Instruments GR200) on a 72” Braner Slitter. This non-contact thickness gauge measures various steel alloys up to .250”.
- [Voss Orders Second AGT400](https://www.advgauging.com/voss-orders-second-agt400/) - Voss has purchased their second AGT400 to be installed on a 72” pickle line. This system replaces an obsolete ESC/Global unit and will measure the thickness of various steel alloys up to .250”.
- [A.G.T. SHIPS NEW AGT400 TO STEEL TECHNOLOGIES PESQUERIA](https://www.advgauging.com/a-g-t-ships-new-agt400-to-steel-technologies-pesqueria/) - A.G.T. has shipped a new AGT400 to Steel Technologies in Pesqueria, Mexico. This gauge will be used to measure various steel alloys, including stainless steel, with a thickness range of .015 to .250” on a new 72” Braner Multi-Blanking line. This shipment marks the 32nd AGT400 thickness gauge now installed at various Steel Technologies locations.
- [AGT400 Goes To Charter](https://www.advgauging.com/agt400-goes-to-charter/) - An AGT400 has been shipped to Charter Steel to upgrade their obsolete GR200 thickness gauge. This system will measure the thickness of various steel alloys on their 72” Braner Slitter.
- [AGT400 Installed In University Park](https://www.advgauging.com/agt400-installed-in-university-park/) - A new AGT400 has been installed at Esmark Steel’s University Park (Chicago) facility. IT is an upgrade to an obsolete BSK thickness gauge located on a 72” Braner Slitter and will be used to measure various steel alloys with a maximum thickness of .250”. This is Esmark’s fifth AGT400 thickness gauge.
- [GREENPOINT METALS, INC. ORDERS THREE NEW AGT400 GAUGES](https://www.advgauging.com/greenpoint-metals-inc-orders-three-new-agt400-gauges/) - Greenpoint Metals, Inc. (Franklin, OH) has placed two new thickness gauge orders with Advanced Gauging Technologies, L.L.C. (Plain City, OH). One order is for two new AGT400 gauges which will replace obsolete x-ray gauges currently located on two 72” slitting lines at their Franklin, OH facility. The second order is also for an AGT400 which
- [Tarkett Orders First Two AGT800’s](https://www.advgauging.com/tarkett-orders-first-two-agt800s/) - Tarkett (Florence) has ordered two AGT800 laser thickness measurement gauges for their 60-inch tile line that processes material with thickness range of .012 up to .160. These systems were specifically designed to automate their calendaring and embossing processes.
- [AGT400 Installed At Thomas Steel Strip](https://www.advgauging.com/agt400-installed-at-thomas-steel-strip/) - Thomas Steel Strip (Warren) is now home to a new AGT400, replacing an obsolete LFE thickness gauge. Our AGT400 will measure gauge of HSLA, copper, brass, nickel and nickel-zinc alloys with a thickness range up to .079”.
- [Charter Steel Upgrades To AGT400](https://www.advgauging.com/charter-steel-upgrades-to-agt400/) - Charter Steel is adding an AGT400 upgrade an obsolete GR200 thickness gauge. It will measure the thickness of various steel alloys on their 72” Braner Slitter.
- [First AGT600 Commissioned at WAVE](https://www.advgauging.com/first-agt600-commissioned-at-wave/) - The first ever production AGT600 compact laser gauge has been commissioned at Worthington Armstrong Venture (WAVE) in North Las Vegas, NV. This newest edition to the A.G.T. family of gauges was installed on a Dallan rollformer and will be used to measure structural steel with a thickness range of .009 to .034”.
- [Feroleto Steel Orders Their Third AGT800](https://www.advgauging.com/feroleto-steel-orders-their-third-agt800/) - Feroleto Steel, Inc. (Bridgeport, CT) has ordered a new AGT800 Laser Thickness Gauge for use on an 18” Chicago Rolling Mill. It will feature a custom designed C-frame and be used to measure various steel alloys with a thickness range of .020 to .250”. This will be Feroleto’s third Advanced Gauging thickness gauge and the
- [A.G.T. Attends Golf Outing](https://www.advgauging.com/a-g-t-attends-golf-outing/) - We had a lot of fun playing golf in the sun with our friends from McWane Ductile.
- [Heidtman Adds Eighth Gauge](https://www.advgauging.com/heidtman-adds-eighth-gauge/) - An AGT400 was shipped to Heidtman Steel Products in Butler, Indiana. This isotope gauge will upgrade an obsolete GR200. The AGT400 will be installed on a temper mill and will measure steel with a thickness up to .250”. This will be Heidtman’s eighth AGT400 thickness gauge & S.P.C. reporting system.
- [Mill Steel Is Operating Two More AGT400s](https://www.advgauging.com/mill-steel-is-operating-two-more-agt400s/) - Two additional AGT400 thickness gauges have been installed at Mill Steel’s Grand Rapids plant. Both gauges are upgrades to obsolete Weston and ESC brand thickness gauges and are on slitting lines to measure the thickness of various steel alloys.
- [Samuel Adds Laser Gauge](https://www.advgauging.com/samuel-adds-laser-gauge/) - Samuel, Son & Co. – Columbia, Tennessee is the home of a new AGT800 laser thickness gauge. This gauge is installed on an 84” Alcos slitter and will measure thickness of steel up to .160.” This is Samuel’s sixth A.G.T. thickness gauge.
- [First AGT600 Compact Laser Thickness Gauge Ships to WAVE](https://www.advgauging.com/first-agt600-compact-laser-thickness-gauge-ships-to-wave/) - Advanced Gauging’s first AGT600 compact laser thickness gauge has been shipped to Worthington Armstrong Venture (WAVE) in North Las Vegas, NV. This new portable gauge will be used to measure structural steel with a thickness range of .009” to .030” and material widths of 1.65” to 5.00”. With its small footprint and unique “plug &
- [Delaco Adds Another AGT400](https://www.advgauging.com/delaco-adds-another-agt400/) - An AGT400 was commissioned at Delaco Steel in Dearborn, Michigan. This isotope gauge was installed on a 72” slitting line and replaced an outdated GR200. This is Delaco’s second AGT400.
- [We Are Growing!](https://www.advgauging.com/we-are-growing-apply-today/) - We are looking for a Field Service Technician to join our growing team. Please apply via LinkedIn or send your resume to MeLisaW@AdvGauging.com.
- [Steel Technologies Adds Another Gauge](https://www.advgauging.com/steel-technologies-adds-another-gauge/) - An AGT400 was commissioned at Steel Technologies in Crawfordsville, Indiana. This isotope gauge was installed on a 72” slitting line. Steel Technologies has 30+ A.G.T. gauges at 17 different Steel Technologies locations.
- [Delaco Gauge Ships](https://www.advgauging.com/delaco-gauge-ships/) - An AGT400 is making its way to Dearborn, Michigan’s Delaco Steel. This isotope thickness gauge will replace an outdated GR200 and be installed on a 72” slitting line.
- [Mill Steel Orders Two More AGT400s](https://www.advgauging.com/mill-steel-orders-two-more-agt400s/) - Two additional AGT400 thickness gauges have been shipped to Mill Steel. Both gauges are upgrades to obsolete Weston and ESC brand thickness gauges and will be installed on slitting lines in Grand Rapids to measure various steel alloys.
- [ADVANCED GAUGING & HEIDTMAN STEEL FEATURED IN MAY 2017 EDITION OF MODERN METALS](https://www.advgauging.com/advanced-gauging-heidtman-steel-featured-in-may-2017-edition-of-modern-metals/) - Heidtman Steel and A.G.T. are featured in a new case study article for the May 2017 edition of Modern Metals. The article, titled “Through Thick and Thin”, focuses on Heidtman’s reliance on thickness gauging and their partnership with A.G.T. Below is an excerpt from the article. “May 2017 - Heidtman Steel, based in Toledo, is
- [Mill Steel Orders Two AGT400s](https://www.advgauging.com/mill-steel-orders-two-agt400s/) - Mill Steel – Grand Rapids, Michigan placed an order for two AGT400 isotope thickness gauge upgrades. These upgrades will replace Weston 5310 gauges built in the eighties. Both gauges will be installed on slitting lines and measure various steel alloys.
- [Steel Technologies Mexico Orders 3rd AGT400](https://www.advgauging.com/steel-technologies-mexico-orders-3rd-agt400/) - A.G.T. has received an order from Steel Technologies de Mexico, S.A. de C.V. (Pesqueria, N.L.) for a new AGT400 Thickness Gauge. This system will be installed on a new Andritz Herr-Voss 74” Multi-Blanking Line and will process various steel alloys with a thickness range of .010” to .150”. This will be Steel Technologies 32nd Advanced Gauging
- [Steel Technologies Adds 31st A.G.T. Gauge](https://www.advgauging.com/steel-technologies-adds-31st-a-g-t-gauge/) - Steel Technologies – Mishawaka, Indiana has added an AGT400 to their operations. The gauge was installed on a slitting line and will measure steel with a thickness up to .200”. This will be Steel Technologies 31st A.G.T. thickness gauge & S.P.C. reporting system.
- [Grand Steel Products AGT400 Commissioned](https://www.advgauging.com/grand-steel-products-agt400-commissioned/) - John Fearing, our Senior Field Technician, has completed the startup of an AGT400 at Grand Steel Products located in Wixom, MI. This gauge, located on a 72” Loopco Slitter, will be used to measure various steel alloys with a thickness range of .010 to .195”. It is Grand Steel’s first AGT400.
- [Heidtman Upgrades Another Gauge](https://www.advgauging.com/heidtman-upgrades-another-gauge/) - Heidtman Steel Products in Butler, Indiana has purchased another AGT400. This upgrade of a GR200 will be installed on a temper mill and will measure steel with a thickness up to .250”. This will be Heidtman’s eighth AGT400 thickness gauge & S.P.C. reporting system.
- [WORTHINGTON ARMSTRONG VENTURE ORDERS NEW AGT600 LASER GAUGE](https://www.advgauging.com/worthington-armstrong-venture-orders-new-agt600-laser-gauge/) - Worthington Armstrong Venture (WAVE) has placed an order for our recently introduced AGT600 Compact “Plug & Play” Laser Thickness Gauge. This new gauge will be shipping to WAVE’s facility in North Las Vegas, NV. It will be located on a Hot Dipped Galvanized Coating line and will measure structural steel with a thickness range of
- [Atlas Adds AGT400](https://www.advgauging.com/atlas-adds-agt400/) - Atlas Steel Products has successfully added and installed an AGT400 to its operations. This is an upgrade of a 1992 GR200 thickness gauge located on their 60” Chicago slitter.
- [Delaco Steel Orders a New AGT400](https://www.advgauging.com/delaco-steel-orders-a-new-agt400/) - Delaco Steel (Dearborn, MI), has ordered a new AGT400 to upgrade an obsolete GR200 thickness gauge. This system will be used to measure various steel alloys on a 72” Pro-Eco Slitting Line. Shipment is scheduled for early May 2017.
- [Connect With Us On LinkedIn!](https://www.advgauging.com/connect-with-us-linkedin/) - Are you on LinkedIn? So are we! Connect with us today!
- [AGT400 Thickness Gauge To Measure Automotive Parts](https://www.advgauging.com/agt400-thickness-gauge-to-measure-automotive-parts/) - An AGT400 isotope thickness gauge has been installed at an automotive plant in Smyrna, Tennessee to monitor tight tolerances of steel. This gauge is located on a 1,900 mm. blanking line and will be measuring steel with a thickness range of 0.5 to 1.4 mm. Non-contact gauges are adding value and even higher quality standards
- [Measuring Aluminum Coils](https://www.advgauging.com/measuring-aluminum-coils/) - Isotope thickness gauges are actually transmission gauges. This means they transmit radiation through the material to be measured. Physics blessed us with an isotope (Am241) that emits constant gamma radiation at an energy level (60 keV) ideal for measuring steel. Thin steel blocks a little of the radiation, and thicker steel blocks most of it.
- [AGT400 Ships](https://www.advgauging.com/agt400-ships/) - Advanced Gauging has shipped an AGT400 isotope thickness gauge to Nissan Motor Manufacturing Corporation in Tennessee. This gauge will be installed on a 1,900 mm. blanking line and measure steel with a thickness range of 0.5 to 1.4 mm. Startup and commissioning of the gauge is scheduled for later this month.
- [Company Stays Healthy](https://www.advgauging.com/company-stays-healthy/) - Our company has a health and wellness program open to all employees because at A.G.T. we believe the health of employees should be a high priority. This program consists of yoga once a week and a coordinated strength (and sometimes cardio) workout session twice a week. An online program is also available for weekends or
- [Is Thickness Critical?](https://www.advgauging.com/is-thickness-critical/) - Is thickness critical for your operations? Are you looking for a quick and easy solution to track thickness? What if I told you that production never has to stop to get accurate readings? Would you hesitate to purchase equipment if could increase revenue and reduce scrap? Our revolutionary turnkey laser thickness gauges use state of
- [Todd Allen Celebrates 12 Years!](https://www.advgauging.com/todd-allen-celebrates-12-years/) - Our very own information technology guru, Todd Allen, celebrates 12 years of being with A.G.T. this month. Todd is an all-hands on deck guy who knows a lot about a lot. He is very well versed in all areas to help our company run as smoothly as possible. Todd has performed various roles throughout the
- [Nissan Motor Manufacturing Corporation Orders AGT400](https://www.advgauging.com/nissan-motor-manufacturing-corporation-orders-agt400/) - Nissan Motor Manufacturing Corporation in Tennessee has ordered a new AGT400 thickness gauge to monitor tolerances of steel thickness. This gauge will be installed on a 1,900 mm. blanking line and measure steel with a thickness range of 0.5 to 1.4 mm. Shipment and startup are scheduled for the first quarter.
- [Heidtman AGT400 Startup](https://www.advgauging.com/heidtman-agt400-startup/) - Heidtman Steel Products in Butler, Indiana has recently commissioned a new AGT400. This upgrade of a GR200 is installed on a 60” Pro-Eco slitter and will measure steel with a thickness range of .050” to .250”.
- [Universal Steel Company Installs Gauge](https://www.advgauging.com/universal-steel-company-installs-gauge/) - The Universal Steel Company of Cleveland, Ohio has successfully installed an AGT400 on their 72” Wean Slitter. This thickness gauge will replace an outdated Loral 3500 and measure steel up to .250”.
- [A.G.T. Gives Back In 2016](https://www.advgauging.com/a-g-t-gives-back-2016/) - Advanced Gauging Technologies believes in giving back to the community. We show our gratitude by donating to various charities each year. In 2016 we sent contributable donations to the Honor Flight Network, Make-A-Wish Foundation, Mid-Ohio Food Bank, Nationwide Children’s Hospital, Mount Carmel Outreach and Operation Gratitude.
- [Order Ships To Heidtman](https://www.advgauging.com/order-ships-to-heidtman/) - An AGT400 has been shipped to Heidtman Steel in Butler, Indiana to upgrade an obsolete GR200. The upgrade will be installed on a 60” Pro-Eco slitter and measure steel with a thickness range of .050” to .250”.
- [HEIDTMAN STEEL ORDERS NEW AGT400](https://www.advgauging.com/heidtman-steel-orders-new-agt400/) - Heidtman Steel has ordered a new AGT400 thickness gauge to upgrade an obsolete GR200 located at their Butler, IN plant. The upgrade will include all new electronics and A.G.T.’s proprietary thickness measurement and S.P.C. reporting software. This gauge, currently located on their BUS 1 60” Pro-Eco slitter, will be used to process steel with a
- [Happy Holidays From Your Friends At A.G.T.!](https://www.advgauging.com/happy-holidays/)
- [Order Ships To Atlas](https://www.advgauging.com/order-ships-to-atlas/) - An AGT400 has been shipped to Atlas Steel Products in Twinsburg, Ohio. This is an upgrade of a 1992 GR200 thickness gauge located on their 60” Chicago slitter. Installation is scheduled to be completed this winter.
- [Advanced Gauging Ships Gauge To Universal](https://www.advgauging.com/advanced-gauging-ships-gauge-to-universal/) - A new AGT400 has been shipped to The Universal Steel Company of Cleveland, Ohio. This thickness gauge will replace an outdated Loral 3500, and will measure steel and be installed on their 72” slitting line.
- [A.G.T. Gives Thanks](https://www.advgauging.com/a-g-t-gives-thanks/) - A.G.T. is thankful for our outstanding employees and loyal customers. Happy Holidays!
- [Esmark Steel Group Continues To Upgrade](https://www.advgauging.com/esmark-steel-group-continues-to-upgrade/) - Esmark Steel Group in Chicago Heights is continuing their trend of updating obsolete equipment. Another AGT400 Isotope Thickness Gauge has been shipped to this location and will replace an older model gauge. Installation is scheduled for the first quarter of next year. This is the fifth gauge Esmark has upgraded this year.
- [Pole and Pipe Wall Thickness](https://www.advgauging.com/pole-and-pipe-wall-thickness/) - Our revolutionary laser thickness measuring equipment has recently been installed at a pole and pipe manufacturing plant in eastern Ohio. This system is complete with two gauges that will work in sync with one another to measure the wall thickness of long length pipes and poles. This puts McWane Ductile at the forefront of precision
- [Another AGT400 Installed In Chicagoland](https://www.advgauging.com/another-agt400-installed-in-chicagoland/) - Another AGT400, which will replace an obsolete GR200, is up and running in Chicago Heights. This is the fourth A.G.T. gauge that has been commissioned at Esmark Steel this year. This thickness gauge has been installed on a 60” Stamco slitter and measures steel
- [AGT400 Goes To Warren, Ohio](https://www.advgauging.com/agt400-goes-to-warren-ohio/) - A new AGT400 has shipped to Thomas Steel Strip Corporation located in Warren, Ohio. This gauge will be used to process low carbon steels, HSLA steel, along with copper, brass, nickel and nickel-zinc alloys with a thickness range of .008 to .079”. It replaces an obsolete LFE gauge on a temper mill. Thomas plans to take
- [Upgrade Order To Atlas](https://www.advgauging.com/upgrade-order-to-atlas/) - Advanced Gauging Technologies offers an array of services and products including the ability to upgrade many brands of obsolete non-contact thickness gauges. Atlas Steel Products in Twinsburg, Ohio has recently ordered an AGT400 to upgrade a 1992 GR200 thickness gauge located on their 60” Chicago slitter. Installation is scheduled to be completed this winter.
- [Another AGT800 To Canada](https://www.advgauging.com/another-agt800-to-canada/) - Concord Steel Centre Ltd. (Woodbridge, ON) will receive an AGT800 Laser Thickness Gauge for use on a 60” Pro-Eco slitting line. This thickness gauge will replace an obsolete Weston 5310 isotope thickness gauge which will be decertified in Canada January 2017. This revolutionary laser gauge will measure steel up to .270”. Installation is scheduled for
- [Measuring System For Pole and Pipe Wall Thickness Ships](https://www.advgauging.com/measuring-system-for-pole-and-pipe-wall-thickness-ships/) - Two measuring systems which will work in sync with one another and measure the wall thickness of pipe/pole has been shipped to Coshocton, Ohio. McWane Ductile purchased this revolutionary new laser measuring equipment in order to raise quality standards in the industry. Commissioning of the gauges will happen later this month.
- [Universal Buys Gauge](https://www.advgauging.com/universal-buys-gauge/) - The Universal Steel Company of Cleveland, Ohio has purchased an AGT400 isotope thickness gauge, which will replace their outdated Loral 3500. The gauge will measure steel and be installed on their 72” slitting line.
- [A.G.T. Visits IMTS Show in Chicago](https://www.advgauging.com/a-g-t-visits-imts-show-in-chicago/) - Steve Venters and Derrick Baker recently visited the International Manufacturing Technology Show (IMTS) at McCormick Center in Chicago. The purpose of the visit was threefold: 1) See firsthand the new technologies and innovative manufacturing solutions being offered by show exhibitors; 2) Connect with current and possible new vendors; and 3) Investigate joint opportunities with show
- [Thomas Steel Strip Orders New Gauge](https://www.advgauging.com/thomas-steel-strip-orders-new-gauge/) - Thomas Steel Strip Corporation, Warren, OH, has ordered a new AGT400 thickness gauge to replace an obsolete LFE gauge on a temper mill. This gauge will be used to process low carbon steels, HSLA steel, along with copper, brass, nickel and nickel-zinc alloys with a thickness range of .008 to .079”. Thomas plans to take
- [Fast N Loud](https://www.advgauging.com/fast-n-loud/) - Gas Monkey Garage in Dallas, Texas is home to a popular show on the Discovery channel, Fast N Loud. A man’s man dreamland, it is considered a shop for building and flipping cars. Our Field Technician, Jim Russell had the pleasure of meeting Richard Rawlings, the main star of the show. Pictured below you will
- [A.G.T. Adds Yoga](https://www.advgauging.com/a-g-t-adds-yoga/) - Advanced Gauging was founded on the principal of providing exceptional customer service, and to this day, our company’s philosophy is to always prioritize customers. Our customers’ satisfaction is a direct reflection of the outstanding employees of A.G.T. Steven R. Covey, author of The Seven Habits of Highly Effective People is famous for his words “Always
- [Laser Gauge Measures Vinyl](https://www.advgauging.com/laser-gauge-measures-vinyl/) - An AGT800 has been installed on a vinyl sheeting extrusion line in North Carolina. The laser gauge will measure thickness of material produced on this line comes in various colors up to .500”.
- [AGT400 To Chicagoland](https://www.advgauging.com/agt400-to-chicagoland/) - An AGT400 has been shipped to Chicago Heights. This is the fourth A.G.T. gauge to be commissioned at Esmark Steel this year. This thickness gauge will be installed on a 60” Stamco slitter and measure steel
- [A.G.T. SHIPS NEW LASER GAUGE FOR VINYL PROCESSING LINE](https://www.advgauging.com/a-g-t-ships-new-laser-gauge-for-vinyl-processing-line/) - A.G.T. has shipped a new AGT800 laser thickness gauge for use on a vinyl sheeting extrusion line located in east central North Carolina. The material produced on this line comes in various colors and thicknesses ranging from .025” up to .500”. This application demonstrates the versatility of the AGT800 which can measure virtually any material
- [AGT400 Installed At Metals U.S.A.](https://www.advgauging.com/agt400-installed-at-metals-u-s-a/) - Metals USA in Madison, Illinois is now a proud owner of an AGT400 Isotope Thickness Gauge. The AGT400 replaced an obsolete GR200. The measuring system is installed on a 72” Alcos slitter and used to measure the thickness on various steel alloys. This is the third Metals USA facility to switch over to Advanced Gauging
- [Esmark Installs Third Gauge Of The Year](https://www.advgauging.com/esmark-installs-third-gauge-of-the-year/) - A third AGT400 has been installed at Chicago Heights’ Esmark. The AGT400 thickness measuring system will replace an outdated GR200 for use on a 60” Stamco slitter to measure the thickness of various steel alloys with a thickness of
- [A.G.T. and Concord Steel Address Canadian Weston 5310 Sources](https://www.advgauging.com/a-g-t-and-concord-steel-address-canadian-weston-5310-sources/) - A.G.T. has been awarded three new purchase orders from Concord Steel Centre Ltd. (Woodbridge, ON) to address the upcoming decertification of Weston 5310 isotope sources in Canada. The Canadian Nuclear Safety Commission (CNSC) has advised that certification of these sources, used on non-contact thickness gauges, will expire January 31, 2017. The purchase orders cover the
- [Five Minute Catch Up With John Fearing](https://www.advgauging.com/five-minute-catch-up-with-john-fearing/) - John Fearing recently completed his annual week long motor cycle trip. This year he chose to ride solo and didn’t make any pre-planned stops. He rode where the wind blew him. He ran down to southern Ohio for a day of riding in his old stomping grounds of Lawrence County and dinner with his parents.
- [AGT400 Goes To Metals U.S.A.](https://www.advgauging.com/agt400-goes-to-metals-u-s-a/) - An AGT400 has been shipped to Metals USA in Madison, Illinois. The AGT400 will upgrade their obsolete 1996 model GR200, and be used to measure the thickness on various steel alloys on their 72” Alcos slitter. This is the third Metals USA facility to switch over to Advanced Gauging for their thickness gauging requirements.
- [Two AGT400 Isotope Thickness Gauges Installed](https://www.advgauging.com/two-agt400-isotope-thickness-gauges-installed/) - Advanced Gauging Technologies has successfully completed the commissioning of two more AGT400s at USS-Posco Industries (Pittsburg, California). Both gauges were installed on a pickle line tandem cold mill (PLTCM) and are measuring steel with a thickness range of .030 to .200”. These gauges replaced obsolete Weston 3000 thickness measurement systems.
- [Happy & Healthy Employees](https://www.advgauging.com/happy-healthy-employees/) - Our employees are getting stronger and healthier each week! Pictured below (left to right) Tiffany, MeLisa and Scott are doing plate pulls. A.G.T. has seen tremendous results by implementing a group fitness program midday twice a week this includes more productive performances, weight loss, happier employees and strong team bonding.
- [Thickness Gauging Services](https://www.advgauging.com/thickness-gauging-services/) - Advanced Gauging Technologies is committed to making all of our customers happy. Our technicians have over 60 years of combined experience, and are exceptionally dedicated to working on any new or existing brand of thickness gauge. If you have a question or would like to request service, please do not hesitate to reach out to
- [A.G.T. Fun Fact](https://www.advgauging.com/a-g-t-fun-fact/) - Advanced Gauging Technologies reaches over 26 countries with our Quarterly Newsletter. This is a 50% increase over the last decade. Sign up to receive The Gauging Times here.
- [Two AGT400 Thickness Gauges Ship To U.S.S. Posco](https://www.advgauging.com/two-agt400-thickness-gauges-ship-to-u-s-s-posco/) - Two AGT400 Isotope Thickness Gauges are in transit to Pittsburg, California. These measuring systems will be installed on a pickle line tandem cold mill (PLTCM) at USS-Posco Industries. Both thickness gauges will replace obsolete Weston 3000s. The AGT400s will measure steel with a thickness range of .030 to .200”.
- [Certificate of Recognition](https://www.advgauging.com/certificate-of-recognition/) - Sales Associate, Tiffany Rea, was recognized by President, Scott Cook for growing sales in new industry applications. Over the last few months, Tiffany has helped the company grow in new market areas, including the measurement of wall thickness in cast iron poles/pipes.
- [MeLisa Joins Our Team](https://www.advgauging.com/melisa-joins-our-team/) - When you call A.G.T. you are likely to hear the sunshine in the voice of our newest team member, MeLisa Williams. MeLisa comes to the A.G.T. with over 20 years of office experience. Her solid combination of work ethics, organizational skills and career of assisting is a great fit for A.G.T. family. Growing up in
- [AGT Laser Gauge Measures Any Alloy](https://www.advgauging.com/agt-laser-gauge-measures-any-alloy/) - Article appears in Metal Center News Magazine, March 2016. March 2016 - Advanced Gauging Technologies, Plain City, Ohio, offers its patented AGT800 laser thickness gauge, designed to measure any alloy processed in coil, sheet or strip form. The AGT800 is an optical-based measuring system that uses high-precision Keyence laser senors. Each sensor emits a Class II laser
- [Another AGT400 Ships To Esmark](https://www.advgauging.com/another-agt400-ships-to-esmark/) - Another AGT400 has left our Plain City headquarters and is heading for Chicago Heights where it will be installed in Esmark’s service center. This gauge will replace an outdated GR200 and will be installed on a 60” Stamco slitter to measure the thickness of various steel alloys with a thickness of
- [McWane Ductile Orders Two Laser Thickness Gauges For Cast Pole/Pipe](https://www.advgauging.com/mcwane-ductile-orders-two-laser-thickness-gauges-for-cast-polepipe/) - McWane Ductile out of Coshocton, Ohio has purchased two AGT800s. The laser gauge measurement application is for the manufacturing of various cast pipe and pole, 18’ 6” in length with a thickness range of .220 to .700” and diameters between 6 and 36”.
- [U.S.S. Posco Buys Two AGT400 Isotope Thickness Gauges](https://www.advgauging.com/u-s-s-posco-buys-two-agt400-isotope-thickness-gauges/) - USS-Posco Industries (Pittsburg, California) purchased two AGT400s. These gauges will replace obsolete Weston 3000 thickness measurement systems. The AGT400s will be installed on a pickle line tandem cold mill (PLTCM) to measure steel with a thickness range of .030 to .200”.
- [AGT400 Certification Awarded To Mike Collier](https://www.advgauging.com/agt400-certification-awarded-to-mike-collier/) - Mike Collier, our production and inventory specialist recently earned his AGT400 certification. This certification means that Mike has comprehensive knowledge of our AGT400 Thickness Gauge as well as the ability to service it. The AGT400 certification is part of our overall education program which helps our associates give customers the best service possible. We congratulate
- [Two Year Fitness Anniversary!](https://www.advgauging.com/two-year-fitness-anniversary/) - We are celebrating two years of our in house health and fitness program. Every Tuesday and Thursday our employees enjoy an exercise regimen with Personal Trainer Greg Jasnikowski. Employees have seen great results and look forward to getting more in shape and flexible each week.
- [AGT800 ORDERED FOR VINYL PROCESSING LINE](https://www.advgauging.com/agt800-ordered-for-vinyl-processing-line/) - A new AGT800 laser thickness gauge has been ordered for use on a vinyl sheeting extrusion line. This material is produced in various colors and thicknesses ranging from .025” up to .500”. The AGT800 is a perfect fit for this application and will provide our customer with precise real time measurement information, detailed coil reports
- [Custom Fit C-frames](https://www.advgauging.com/custom-fit-c-frames/) - Did you know A.G.T. customizes each thickness gauge to meet the needs of every customer? No matter how big or small your processing line is, we build and design C-frames to order to ensure a perfect fit.
- [Motorcycle Safety](https://www.advgauging.com/motorcycle-safety/) - Spring is in the air and that means a lot more motorcycles will be on the road. Take an extra second to look at your surroundings. If you’re in the Columbus area, you might even see our Senior Field Service Engineer John Fearing riding.
- [Esmark Installs Second AGT400](https://www.advgauging.com/esmark-installs-second-agt400/) - Another AGT400 has been installed at Esmark Steel Group in Chicago Heights. This gauge replaced an obsolete GR200 and will be used to measure the thickness of various steel alloys on a 60” Stamco slitter. Three more AGT400 thickness gauges will be installed at Esmark during the 2016 calendar year.
- [Hercules Installs AGT400](https://www.advgauging.com/hercules-installs-agt400/) - An AGT400 has been installed at Hercules Industries in Denver, Colorado. This gauge replaced an obsolete GR200 and will be used to measure the thickness of various steel alloys on a 60” Stamco slitter.
- [Second Successful Feroleto Installation](https://www.advgauging.com/second-successful-feroleto-installation/) - Feroleto Steel has commissioned their second AGT800 Laser Thickness Gauge. This gauge is located at their Weirton, West Virginia location and was installed on a 62” Loopco Slitter to measure various steel alloys with a thickness range of .008” to .250”. Feroleto has long-term plans to replace 10 to 12 obsolete x-ray thickness gauges with
- [Advanced Gauging Technologies Awarded U.S. Patent for AGT800 Laser Gauge](https://www.advgauging.com/advanced-gauging-technologies-awarded-u-s-patent-for-agt800-laser-gauge/) - A.G.T. has been awarded a U.S. Patent on 13 out of 14 key claims for our AGT800 Laser Thickness Gauge after a year of review by the United States Patent Office. Patent No. 9151595 includes coverage of our revolutionary Passline Angle Compensation, C-frame Temperature correction (ISOtemp™), and methods of computing laser beam collinearity and beam
- [MH TECH KOREA Named As New Sales Representative For South Korea](https://www.advgauging.com/mh-tech-korea-named-as-new-sales-representative-for-south-korea/) - A.G.T. is pleased to announce that MH Tech Korea has been selected as our new Sales Representative for South Korea. Mr. Myoung-il Gou, located in Seoul, will be our primary contact for all sales and marketing activities as well as new gauge startups and ongoing technical support. Please feel free to contact MH Tech to
- [Another AGT400 Shipment to Esmark](https://www.advgauging.com/another-agt400-shipment-to-esmark/) - Esmark Steel (Chicago Heights, IL) has received the second of five total AGT400 gauges ordered under our recent legacy gauge upgrade promotion. This new gauge will be located on their No. 2 60” Stamco Slitter and is replacing an obsolete GR200. The remaining three gauges ordered under this program will ship over the course of
- [AGT400 Ships To Hercules](https://www.advgauging.com/agt400-ships-to-hercules/) - Another AGT400 has set sail from our Plain City warehouse. This gauge will replace an outdated GR200 and will be installed on a 60” Stamco slitter to measure the thickness of various steel alloys at Hercules in Denver, Colorado.
- [ALMETALS, INC. AGT400 UPGRADE STARTUP](https://www.advgauging.com/almetals-inc-agt400-upgrade-startup/) - We recently completed another successful startup of an AGT400 thickness gauge, this time at Almetals, Inc. This new gauge, which is actually an upgrade of an obsolete DMC 410, is used installed on a 36” Ruesch slitter at Almetals’ Wixom, MI facility.
- [Esmark Steel Group Adds AGT400](https://www.advgauging.com/esmark-steel-group-adds-agt400/) - A.G.T.’s Senior Field Engineer, John Fearing, commissioned a new AGT400 at Esmark Steel Group in Chicago Heights, Illinois. This gauge is an upgrade of a GR200 and will be used on Esmark’s 60” Stamco slitter with a thickness
- [New AGT800 Commissioned at Lane Steel](https://www.advgauging.com/new-agt800-commissioned-at-lane-steel/) - A new AGT800 laser gauge has been commissioned at Lane Steel in McKees Rocks, PA. Startup was completed earlier this month in conjunction with the installation and startup of a new Braner/Loopco 74” Slitter. This AGT800 will be used to measure HR, CR, HRPO and coated steel with a thickness range of .015” to .250”.
- [2016 Service Rate Freeze](https://www.advgauging.com/2016-service-rate-freeze/) - Good News! Due to ongoing concerns related to low steel prices and a slowdown in the energy sector, A.G.T. is holding service rates for all of our customers. We understand the difficulty our customers are facing and have determined that a little stability in pricing is a good thing for everyone involved. We strive for
- [New AGT400 Ships to Almetals in Wixom, MI](https://www.advgauging.com/new-agt400-ships-to-almetals-in-wixom-mi/) - A new AGT400 isotope gauge has been shipped to Almetals, Inc. in Wixom, MI. This gauge will be used to upgrade an obsolete DMC 410 located on their 36” Ruesch slitter. Benefits of an AGT400 upgrade include all new electronics, A.G.T.’s proprietary software and programming, and state of the art coil and S.P.C. reports along
- [Charitable Contributions by A.G.T.](https://www.advgauging.com/charitable-contributions-by-a-g-t/) - Advanced Gauging Technologies believes in giving back to the community. We show our gratitude by donating to various charities each year. In 2015 we sent contributable donations to the Honor Flight Network, Make-A-Wish Foundation, Mid-Ohio Food Bank, Nationwide Children’s Hospital, Ronald McDonald House and Wounded Warrior Project. To learn more about these charities, please click here.
- [Feroleto Steel’s First AGT800 is Commissioned](https://www.advgauging.com/feroleto-steels-first-agt800-is-commissioned/) - Feroleto Steel in Bridgeport, CT has commissioned their first AGT800 Laser Thickness Gauge. It is located on a 62” Loopco Slitter and will be used to measure various steel alloys with a thickness range of .008” to .250”. This is the first of two AGT800’s purchased by Feroleto in 2015. The second system has shipped
- [Hercules Upgrades Thickness Gauge](https://www.advgauging.com/2233-2/) - Hercules in Denver, Colorado has purchased an AGT400 to upgrade their obsolete 1995 Gamma Instruments model GR200. The AGT400 will be installed and used to measure the thickness of various steel alloys on their 60” Stamco slitter.
- [Metals USA Upgrades](https://www.advgauging.com/metals-usa-upgrades/) - Metals USA in Madison, Illinois has purchased an AGT400 to upgrade their obsolete 1996 model GR200. The AGT400 will be installed and used to measure the thickness on various steel alloys on their 72” Alcos slitter. This will be the third Metals USA facility to switch over to Advanced Gauging for their thickness gauging requirements.
- [Nova Steel's Second AGT800 Commissioned](https://www.advgauging.com/nova-steels-second-agt800-commissioned/) - Nova Steel (Stoney Creek, Ontario), has commissioned their second AGT800 laser thickness gauge this year. A.G.T. completed the startup and training of the new gauge, located on a 74" Pro Eco pickle line, the week of December 7th. Nova's first AGT800, commissioned in February 2015, is currently used on a 60" Pro Eco slitter.
- [Almetals Upgrades To AGT400](https://www.advgauging.com/almetals-upgrades-to-agt400/) - Almetals, Wixom, Michigan, has purchased a thickness gauge upgrade for their obsolete DMC model. The AGT400 will be installed and used to measure the thickness on their 36” Ruesch slitting line for the processing of various brass, stainless, aluminum and carbon steel alloys.
- [Esmark Steel Group Upgrades Four Gauges](https://www.advgauging.com/esmark-steel-group-upgrades-four-gauges/) - Esmark Steel Group, Chicago Heights, Illinois, did not just stop with one upgrade order. They have definitely taken full advantage of our Legacy / Obsolete Thickness Gauge Upgrade Program (https://www.advgauging.com//legacy-obsolete-gauge-upgrade-program/) by ordering four additional AGT400 upgrades to replace an outdated electronics on their existing gauges. You can too, at least for the next seven days!
- [Upgrade Ships To Esmark](https://www.advgauging.com/upgrade-ships-to-esmark/) - We are happy to announce that an AGT400 has shipped to Esmark Steel Group, Chicago Heights, Illinois. Esmark has taken advantage of our new Legacy / Obsolete Thickness Gauge Upgrade Program (https://www.advgauging.com//legacy-obsolete-gauge-upgrade-program/) by ordering an AGT400 upgrade to replace an outdated 20 year old GR200.
- [A.G.T. SELECTED AS A BEST PLACE TO WORK](https://www.advgauging.com/a-g-t-selected-as-a-best-place-to-work/) - Advanced Gauging Technologies has been selected by Columbus Business First as a central Ohio area BEST PLACE TO WORK. A record 235 companies were nominated with selections based on the results of employee engagement surveys conducted by sponsor Quantum Workplace. The award, announced at a special presentation luncheon in Columbus on November 12th, was
- [Energy Efficient](https://www.advgauging.com/energy-efficient/) - Here at Advanced Gauging Technologies, we take pride in being innovative. Since our most recent idea is now operational, we wanted to share the exciting news with you! In an effort to be cutting edge and create a more environmentally friendly workplace, we have installed 124 solar panels atop the roof of our
- [A.G.T. Welcomes New Field Service Technician!](https://www.advgauging.com/2176-2/) - Kevin was born in Central Ohio and is the youngest of four boys. With the exception of living in Cincinnati for a few years, he has lived in the Columbus area all of his life. Kevin was married for 14 years, has a son, Bryden, and a silky terrier, Odie. Growing up, Kevin would explore
- [AGT800 Laser Thickness Gauge Ships To Alcos Machinery](https://www.advgauging.com/agt800-laser-thickness-gauge-ships-to-alcos-machinery/) - Another AGT800 is in transit, this time to Alcos Machinery, a Canadian line builder. This laser thickness gauge will be installed on a new 84” slitting line for Samuel, Son & Company’s new Columbia, Tennessee facility. The gauge will be used to measure various steel and aluminum alloys with a thickness range of 0.020 to
- [Rapid Results](https://www.advgauging.com/rapid-results/) - Article by Emily Vasquez and appears in Modern Metals Magazine, September 2015. Service center realizes unexpected savings by upgrading gauging system September 2015 - Where there is a problem, there must be a solution. When Vince Gallo first arrived at Nova Steel in 2013, he noticed the Stoney Creek, Ontario, facility was using an older gauging
- [Owner And President Earns Gold](https://www.advgauging.com/owner-and-president-earns-gold/) - Even at age 50, A.G.T.’s owner and president, Scott Cook, is a practicing martial artist. He undergoes intense training sessions 12 hours every week and often makes appearances in the office with black eyes. Scott has always had a passion for different styles of martial arts, and over the years, he has earned black belts
- [Two AGT800 Laser Thickness Gauges Ship To Feroleto Steel](https://www.advgauging.com/two-agt800-laser-thickness-gauges-ship-to-feroleto-steel/) - Two AGT800 laser thickness gauges have shipped to Feroleto Steel Co., Inc., a subsidiary of Toyota Tsusho of America. The first gauge is in transit to Feroleto’s Bridgeport, CT service center and the other is going to their Weirton, WV facility. Both thickness measurement gauges will be used on Loopco Slitters.
- [A.G.T. Ships A Second AGT800 To Nova Steel](https://www.advgauging.com/a-g-t-ships-a-second-agt800-to-nova-steel/) - Nova Steel’s second AGT800 has been shipped to their Stoney Creek, Ontario plant. Nova placed their order for this new gauge earlier this year after their successful experience with their first AGT800 Laser Thickness Gauge. This system will be located on a 72” Pickle Line and used to process various steel alloys with a thickness
- [Esmark Steel Purchases Upgrade](https://www.advgauging.com/esmark-steel-upgrade-purchase-order/) - Esmark Steel Group, Chicago Heights, IL, has taken advantage of our new Legacy / Obsolete Thickness Gauge Upgrade Program (https://www.advgauging.com//legacy-obsolete-gauge-upgrade-program/) by ordering an AGT400 upgrade for a 20 year old GR200. This limited time program offers customers the opportunity to upgrade their older obsolete gauges at significantly reduced prices. Esmark has advised that they plan
- [Alnor Dew Pointers Available](https://www.advgauging.com/alnor-dew-pointers-available/) - We have five used Model 7000 Alnor Dew Pointers available. These units came into our possession as a result of the Sparrows Point Source Clean-up project and are being sold on an “as is” basis. Each Dew Pointer contains a 7 µCi Radium-226 (Ra226) source. Please note that the pressure regulator oil has dried up
- [Legacy / Obsolete Gauge Upgrade Program](https://www.advgauging.com/legacy-obsolete-gauge-upgrade-program/) - A.G.T. is offering a new, limited-time program for upgrading older legacy / obsolete thickness gauges, many of which were manufactured by companies that have been out of business for a decade or longer. We have always worked hard to keep these outdated gauges operational by providing specialized service and maintaining inventory on spare parts. However,
- [Advanced Gauging Now Easier To Find](https://www.advgauging.com/advanced-gauging-now-easier-to-find/) - By enhancing our signage, we’ve made it easier to find us when you visit. This unique sign lights up automatically when it starts to get dark, making it impossible to miss no matter the time of day. When you are ready to schedule a visit please give a call at (614) 873-6691 or send an
- [AGT800 Gains Popularity with Service Centers](https://www.advgauging.com/agt800-gains-popularity-with-service-centers/) - Our most popular gauging system this year, hands down, is the AGT800 Laser Thickness Gauge. Introduced late in 2013, this unique optical based gauge uses state-of-the-art Keyence laser sensors which are mounted on a C-frame above and below the strip to be measured. Each sensor emits a class ll laser beam and receives the beam
- [A Walk With Steve](https://www.advgauging.com/a-walk-with-steve/) - Where were you born? Pikeville, KY (Hatfield / McCoy Country) Where do you currently live? Delaware, OH How long have you worked with A.G.T.? 3 Years Where did you go to school/college? Nelsonville-York High School / Ohio University What time do you wake up and start work? Up at 5:30 & Work at 7:30 Do
- [A.G.T. Welcomes You!](https://www.advgauging.com/a-g-t-welcomes-you/) - You’ve seen our ads in Modern Metals, Metal Center News and American Metal Market, and now we are inviting you to visit us at our research and development office located in central Ohio. You will experience first-hand what service centers across North America are raving about. If a visit is not feasible for your situation,
- [Always A Beautiful Day at A.G.T.](https://www.advgauging.com/always-a-beautiful-day-at-a-g-t/) - There’s nothing that can quite compare to arriving at work with a beautiful rainbow as your backdrop. It’s an especially beautiful day at Advanced Gauging in central Ohio.
- [A.G.T. Offers Silicone Optical Grease](https://www.advgauging.com/a-g-t-offers-silicone-optical-grease/) - Did you know that A.G.T. can supply you with Silicone Optical Grease, a clear, colorless coupling compound that features excellent light transmission and low evaporation and bleed at 25° C. It is typically used when installing replacement Scintillation Crystals or Photomultiplier Tubes such as those found in certain brands/models of thickness gauge detector heads. Silicone
- [New TCP/IP HMI Communication Option](https://www.advgauging.com/new-tcpip-hmi-communication-option/) - Advanced Gauging is pleased to announce a new TCP/IP HMI Communication option for our AGT400 and AGT800 thickness gauges. This new option enables both gauges to accept a single TCP/IP streaming socket connection on a user defined port for the purpose of requesting information from the gauge or commanding certain actions to the gauge. The
- [First AGT800 Of 2015 Goes To Nova Steel](https://www.advgauging.com/first-agt800-shipment-of-2015-goes-to-nova-steel/) - laser that measures steel
- [A.G.T. Company Cookout and Poker Party](https://www.advgauging.com/a-g-t-company-cookout-and-poker-party/) - Every year Advanced Gauging takes a day to celebrate the hard work of all employees. This year, we celebrated with a cook out and poker party. Employees participated in various roles that encouraged team work while also having fun. After feasting over grilled goodness, we enjoyed a game of Texas Hold’em for some friendly competition.
- [NEW BRANER / LANE STEEL AGT800 SHIPS](https://www.advgauging.com/new-braner-lane-steel-agt800-ships/) - Braner USA’s recent order of a new AGT800 Laser Thickness Gauge was shipped on June 2nd. This gauge is for use on a new 74” Braner slitting line that will be installed at Lane Steel in McKees Rocks, PA. The AGT800 will be used to measure Cold Rolled, Hot Rolled, HRP&O and Coated Steel with
- [FEROLETO STEEL ORDERS TWO AGT800 LASER GAUGES](https://www.advgauging.com/feroleto-steel-orders-two-agt800-laser-gauges/) - Feroleto Steel Co., Inc. recently placed an order for two AGT800 Laser Thickness Gauges. One gauge will be shipping to Feroleto’s Bridgeport, CT service center and the other is going to their Weirton, WV facility. Both gauges will be used on Loopco Slitters. Feroleto selected the AGT800 Laser gauge in lieu of x-ray gauges after
- [New AGT400 Commissioned in Mexico](https://www.advgauging.com/new-agt400-commissioned-in-mexico/) - John Fearing, our Senior Field Technician, completed the startup this week of a new AGT400 at MISA – National Metal Processing, S.A. de C.V. in Guanajuato, Mexico. This gauge, located on a 72” Braner Slitter, is an upgrade to an obsolete Gamma Ray GR200. It is MISA’s second AGT400 at this location and their fifth
- [Now Pay Invoices Online!](https://www.advgauging.com/now-pay-invoices-online/) - Advanced Gauging is making it even easier to do business! We are now accepting payments via the web. You can click the following link https://www.advgauging.com//online-invoice-payment/ or at the very top of our webpage you can hover over the shopping cart and select “Pay Invoice”. If you have questions or need some help, we are always
- [A.G.T. Names Chinese Sales Representative](https://www.advgauging.com/a-g-t-names-chinese-sales-representative/) - Advanced Gauging Technologies is pleased to introduce Shanghai CMS Automation Equipment Co., Ltd. as our new sales representative in China. Mr. Lin Zhang (Roger) will be our primary contact for all sales and marketing activities throughout the country. Please feel free to contact him for product information, literature and requests for quotes. Shanghai CMS Automation
- [A.G.T. Revolutionizes Thickness Gauging with Keyence Laser Sensors](https://www.advgauging.com/a-g-t-revolutionizes-thickness-gauging-with-keyence-laser-sensors/) - Advanced Gauging Technologies in Plain City, Ohio, is a supplier of quality, affordable thickness gauges to the metals industry. The company’s newest gauge, the AGT800 uses laser triangulation technology instead of radioactive isotopes. Elimination of the radioactive source allows companies to achieve accurate thickness measurements without the hassle of licensing and leak test requirements, shipping
- [Misa-National Metal Processing Upgrades](https://www.advgauging.com/misa-national-metal-processing-upgrades/) - Misa-National Metal Processing in San Jose Iturbide GTO, Mexico has placed an order to upgrade their GR200 Isotope Thickness Gauge. The AGT400 will be located on a 72” Braner Slitter and will measure material with a thickness
- [Canada's Second AGT800](https://www.advgauging.com/canadas-second-agt800/) - Nova Steel in Stoney Creek, Ontario is a fan of Advanced Gauging’s latest gauging unit, the AGT800. This optical based gauging system uses state of the art Keyence laser sensors instead of a traditional isotope source for non-contact measurement of material as it is being processed. This gauge will be used on a 72” pickle
- [Cesium Cs-137 Sources Available](https://www.advgauging.com/cesium-cs-137-sources-available/) - Advanced Gauging currently has three “like new” Cesium (Cs-137) sources for sale. These sources, originally manufactured by Berthold Technologies, came into our possession as a result of our participation in the recent Sparrows Point source disposal project. All three sources are Berthold Model No. 7440-D-CR. They are only 7 years old and were originally purchased
- [A.G.T. Leads The Way In Laser Thickness Measurement](https://www.advgauging.com/a-g-t-leads-the-way-in-laser-thickness-measurement/) - Advanced Gauging Technologies was mentioned in the March 2015 issue of American Metal Market as a pioneer in the transition from isotope to laser based thickness gauging. Bill Beck's article highlights the various ways that the metal industry, and its service centers, are using technology to enhance productivity in ways not thought possible even a
- [CLOSEOUT DEALS!](https://www.advgauging.com/closeout-deals/) - Are you looking for a great deal on technology? If you answered yes, then you’ve come to the right spot. We have tremendous closeout special pricing on select items. All you need to do is hover over the shopping cart at the top right side of the page and click on “CLOSEOUT.” There you will
- [We Service Mexico](https://www.advgauging.com/we-service-mexico/) - Field Service Engineer, Craig Walkup, just completed a two week service trip for our Mexican customers. A.G.T. supports customers in Mexico on a semi-annul basis during the months of April and October. We also have a sales representative, Daniel Bortoni (Maquina) who is always happy to help with any inquires about our thickness gauges or
- [Farewell Sarah; Hello Amanda!](https://www.advgauging.com/farewell-sarah-hello-amanda/) - Most of our customers have had the pleasure of working with Sarah over the last few years, and unfortunately we are sad to announce that she and her family have relocated out of state. Amanda Massie has taken over Sarah’s position as Office Assistant. Amanda comes to A.G.T. with eight years of office experience, and
- [C-frames Available](https://www.advgauging.com/c-frames-available/) - Looking for a new or replacement C-frame for your isotope thickness gauge? Is your existing C-frame damaged or broken? Hesitant to pay full price for a new one? A.G.T. has the perfect solution… durable, like new C-frames at significantly reduced prices! These custom built C-frames were manufactured by A.G.T., but were never actually put into
- [New AGT400 Ships to MISA - National Metal Processing in Mexico](https://www.advgauging.com/new-agt400-ships-to-misa-national-metal-processing-in-mexico/) - A new AGT400 was recently shipped to MISA – National Metal Processing, S.A. de C.V. in San Jose Iturbide, Guanajuato, Mexico. This gauge will upgrade an obsolete GR200 located on a 72” Braner Slitter. It will be A.G.T.’s second thickness gauge at this location and the fifth gauge overall that we’ve sold to MISA.
- [Earth Tekniks Named As A.G.T. India's Sales Representative](https://www.advgauging.com/earth-tekniks-named-as-a-g-t-indias-sales-representative/) - Advanced Gauging Technologies is pleased to introduce Earth Tekniks as our new sales representative in India. Aravind is our primary contact for all sales and marketing activities throughout the country. Please feel free to contact Earth Tekniks for product information, literature and requests for quotes. Earth Tekniks #1-11-252, Flat No. 1, Jabbar Estate Begumpet,
- [New AGT800 Order From Alcos](https://www.advgauging.com/new-agt800-order-from-alcos/) - Canadian Line Builder Alcos Machinery, Inc. has placed an order for a new AGT800 Laser Thickness Gauge. It will be installed on a new 84” Slitting Line being built for Samuel, Son & Company and will be Samuel’s sixth A.G.T. thickness gauge in North America. This gauge will be used to measure various steel and
- [Announcing The A.G.T. Isotope Source Recovery Program](https://www.advgauging.com/announcing-the-a-g-t-isotope-source-recovery-program/) - Advanced Gauging is pleased to introduce our new Isotope Source Recovery and Disposal Program. This service has been made possible by A.G.T.’s recent completion of the Sparrows Point, Maryland source cleanup project (see Sept. 11, 2014 blog post) and concurrent GTRI security upgrades. As a result of these projects, the Ohio Department of Health has
- [AGT400 In Operation At Steel Technologies – Celaya,Mexico](https://www.advgauging.com/agt400-in-operation-at-steel-technologies-celayamexico/) - The startup of an AGT400 is now complete at Steel Technologies’ Celaya, Mexico location. This gauging system will measure steel with a thickness range
- [AGT400 Startup Complete At Voss Industries](https://www.advgauging.com/agt400-startup-complete-at-voss-industries/) - Taylor, Michigan’s Voss Industries is now home to an AGT400 Thickness Gauge and S.P.C. Reporting System. This gauger will be used on their 72” Pickle Line and measure steel with a thickness range from .047” to .310”.
- [AGT800 Laser Gauging System Ships TO FCP](https://www.advgauging.com/agt800-laser-gauging-system-ships-to-fcp/) - Today, a new AGT800 Laser Thickness Gauge was shipped to Delta, Ohio. This system will be for use on a 72” Butech Bliss/ Nelson Steel Pickle Line at Fulton County Processing, and will measure steel with a thickness range from .050” to .500”.
- [Polynova Named as New A.G.T. Sales Rep for Southeast Asia](https://www.advgauging.com/polynova-names-as-new-a-g-t-sales-rep-for-southeast-asia/) - We are pleased to announce Polynova Sdn. Bhd. as our new Sales Representative for Southeast Asia. Mr. Tan Ju Reen (J R), owner and Business Development Manager, will be the primary contact for all sales and marketing activities throughout Indonesia, Malaysia, The Philippines, Singapore, Thailand and Vietnam. Located in Penang, Malaysia, Polynova is well positioned
- [Heidtman Startup](https://www.advgauging.com/heidtman-startup/) - Advanced Gauging is a name that you will frequently hear at Heidtman Steel plants across the county. John Fearing completed his fifth startup at Heidtman on an AGT400 which will be used on a 78” Alcos Slitter at their new East Chicago location.
- [AGT400 Ships To Voss Industries](https://www.advgauging.com/agt400-ships-to-voss-industries/) - An AGT400 Thickness Gauge & S.P.C Reporting System has been sent to Taylor, Michigan’s Voss Industries. This system will be used on their 72” Pickle Line. The steel thickness will range from .047” to .310”.
- [Startup Completed At Mill Steel](https://www.advgauging.com/startup-completed-at-mill-steel/) - A successful startup of an AGT400 is complete at Mill Steel in Indiana. John Fearing upgraded an obsolete BSK gauge with a modern AGT400 electronics system. This thickness gauge is featured on a 72” Pro-Eco slitter and measures steel with a range of .010” to .250”.
- [Braner USA Orders An AGT800](https://www.advgauging.com/braner-usa-orders-an-agt800/) - Braner USA ordered an AGT800 Laser Thickness Gauge for use on a new 74” Slitting Line that will be installed at Lane Steel in McKees Rock, PA. This gauge will be used to measure Cold Rolled, Hot Rolled, HRP&O and Coated Steel with a thickness range of 0.012” to 0.250”.
- [Canadian Company Nova Steel Orders Laser Gauge](https://www.advgauging.com/canadian-company-nova-steel-orders-laser-gauge/) - Nova Steel Inc. in Stoney Creek, Ontario has placed an order for an AGT800 Laser Thickness Gauge. Nova has established a reputation for providing quality steel products and services that meet exacting standards of the automotive and other industries. This system will be installed on a 60” Pro-Eco slitter and primarily measure steel with a
- [Voss Industries Places An AGT400 Order](https://www.advgauging.com/voss-industries-places-an-agt400-order/) - Taylor, Michigan’s Voss Industries has ordered a new AGT400 for use on their 72” Pickle Line. This company provides pickling, slitting and blanking services to the flat rolled steel market. Their steel products range from .047” to .310” in thickness.
- [Nebraska’s Valmont Starts Up An AGT400](https://www.advgauging.com/nebraskas-valmont-starts-up-an-agt400/) - A successful startup of an AGT400 is complete at Valmont Industries in Nebraska. Valmont is one of the world’s leading providers of engineered products and services for infrastructure and irrigation equipment in the agriculture industry. This thickness gauge is located on a 79” Herr-Voss Slitter, measuring steel from .048” to .280” thick.
- [NONCONTACT STRIP-THICKNESS MEASUREMENT](https://www.advgauging.com/noncontact-strip-thickness-measurement/) - Advanced Gauging Technologies, LLC, Plain City, OH, introduces the AGT800 laser thickness gauge—an online noncontact device equipped to measure any strip material 0.040 to 0.750 in. thick. The first production system, say company officials, went to a 96- by 0.750-in. Butech stretch leveler-CTL line that shipped in mid-September 2013. The thickness gauge and its accompanying
- [New Marketing And Sales Assistant Joins A.G.T. Team](https://www.advgauging.com/agt-welcomes-a-new-marketing-and-sales-assistant/) - Tiffany Rea is the newest addition to the Advanced Gauging Technologies family. A recent graduate of Wilmington College with a Bachelor’s degree in Business Administration and Marketing, she is responsible for advertising, organizing market research, along with responding to sales requests and inquiries. A former preschool teacher of two years, she is a big people
- [Up and Running at National Material Processing](https://www.advgauging.com/up-and-running-at-national-material-processing/) - John Fearing, our Senior Field Service Engineer, has completed an AGT400 startup which replaced an obsolete GR100 thickness gauge at National Material in East Chicago. This gauger is a perfect fit for their 72” Pro-Eco slitting line. It is the fourth AGT system for National Material.
- [Installation Of An AGT400 Complete At Mill Steel](https://www.advgauging.com/installation-of-an-agt400-complete-at-mill-steel/) - Our AGT400 is now up and running in Jeffersonville’s Mill Steel. This gauge will replace an obsolete BSK gauge and is measuring steel with a thickness range from .010” to .250”. It is located on a 72” Pro-Eco slitter.
- [Chicago Receives Another AGT400](https://www.advgauging.com/chicago-receives-another-agt400/) - National Material Processing Welcomes another AGT400, which will be located at their East Chicago location on a 72” Pro-Eco pickle line. The AGT400 will be responsible for measuring material with a thickness range up to .312”.
- [Another AGT 400 Is Delivered To Mill Steel](https://www.advgauging.com/another-agt-400-is-delivered-to-mill-steel/) - Mill Steel in Jeffersonville, Indiana received their second upgrade this year. Our AGT400 gauger will replace an obsolete ESC thickness gauge. This AGT400 will be on a 72” Herr-Voss slitting line and measure thickness with a range of .010” - .135”.
- [A.G.T. Names Turkey Sales Rep](https://www.advgauging.com/a-g-t-names-turkey-sales-rep/) - Advanced Gauging Technologies is pleased to introduce Metalform as our new sales representative in Turkey. Oğuz Tanrisever is our primary contact for all sales and marketing activities throughout the country. Please feel free to contact Metalform for product information, literature and requests for quotes. Metalform Kaptanpaşa Mah. Halit Ziya Tűrkkan Sok Farmas Plaza A Blk.
- [Another Successful AGT800 Startup](https://www.advgauging.com/another-successful-agt800-startup/) - A new AGT800 went into operation today at Fulton County Processing in Delta, OH. This gauge was installed on their new Butech Bliss / Nelson Steel 72" Pickle Line. FCP now has three total A.G.T. thickness gauges.
- [Annual Radiation Training](https://www.advgauging.com/annual-radiation-training/) - The staff here at Advanced Gauging Technologies recently completed our annual radiation training event. We do this in order to train new staff and offer a refresher to the rest. Each year, Dr. Laura Smith teaches us about the physics of atoms, nuclear binding forces, particle emissions, and a host of other cool nuclear physics
- [Lee Startup](https://www.advgauging.com/lee-startup/) - John Fearing, A.G.T.’s Senior Field Engineer, completed the startup of an AGT800 laser thickness gauge at Lee Steel in Romulus, Michigan. This state of the art technology will be featured on Lee’s new 74” Red Bud EPS pickle line.
- [National Material Processing Places Additional Order](https://www.advgauging.com/national-material-processing-places-additional-order/) - National ordered an AGT400 to upgrade another obsolete GR200 thickness gauge. They will now have our gauging systems at four different plants in four different states.
- [Gauger Goes To Mill](https://www.advgauging.com/gauger-goes-to-mill/) - Via YRC Freight, an AGT400 is in transit to Mill Steel in Jeffersonville, Indiana. This is an upgrade to a BSK gauge that will be located on a 72” Pro-Eco slitting line.
- [Mill Upgrades Again](https://www.advgauging.com/mill-upgrades-again/) - Mill Steel placed an order to upgrade an obsolete ESC thickness gauge. This AGT400 will be on a 72” Herr-Voss slitting line and measure thickness with a range of .010” - .135” at a new facility in Jeffersonville, Indiana.
- [First AGT800 Laser Gauge in Canada Becomes Operational](https://www.advgauging.com/first-agt800-laser-gauge-in-canada-becomes-operational/) - measuring steel thickness with laser
- [Laser Gauge Goes To Lee Steel](https://www.advgauging.com/laser-gauge-goes-to-lee-steel/) - We shipped another AGT800 Laser Gauge today that will be measuring steel with a thickness range of .055”- .375” on a 74” Red Bud EPS pickle line at Lee Steel’s new Romulus, Michigan facility. Lee will now have AGT400 and/or AGT800 thickness gauges at all three of their plant locations.
- [AGT400 Ships To Heidtman Steel](https://www.advgauging.com/agt400-ships-to-heidtman-steel/) - An AGT400 was shipped today to Heidtman Steel for use on a 78” Alcos Slitter at their new East Chicago location. Heidtman will now have AGT400 thickness gauges at five different facilities.
- [Mill Steel Upgrades Gauger](https://www.advgauging.com/mill-steel-upgrades-gauger/) - Mill Steel’s Jeffersonville, Indiana plant placed an AGT400 order to upgrade a BSK gauge. This AGT400 will be located on a 72” Pro-Eco Slitter and will measure material with a thickness range of .010” - .250”.
- [Testing and Measurement - Metal Center News March](https://www.advgauging.com/1170/) - Advanced Gauging Technologies LLC, Plain City, Ohio, offers a new noncontact laser thickness gauge that can measure any strip material ranging from 0.040 to 0.750 inch in thickness. There is no radioactive source and no federal or state licensing requirements. The AGT800 Laser Thickness Measurement and S.P.C. Reporting System is designed for measuring metals and
- [A.G.T. Implements Technician Certification Program](https://www.advgauging.com/a-g-t-implements-technician-certification-program/) - Advanced Gauging has implemented a new Thickness Gauge Certification Program to assist in the ongoing training and development of our Field Technicians and other key A.G.T. personnel. The program includes comprehensive tests on the knowledge and ability to service various models of thickness gauges, including many obsolete gauges whose manufactures are no longer in business.
- [Shipped & Started In Chicago](https://www.advgauging.com/shipped-started-in-chicago/) - Last week we shipped an AGT400 to Chicago, Illinois. Today, John Fearing started it up as an upgrade to an obsolete GR200. This gauging system is located on a 72” Pro-Eco Pickle Line at National Processing Company. They also have AGT400 systems at their Indiana, Pennsylvania and Nuevo Leon, Mexico facilities.
- [AGT400 Ships To Nebraska](https://www.advgauging.com/agt400-ships-to-nebraska/) - Valmont Industries (Valmont, Nebraska) accepts delivery of a new AGT400. This is Valmont’s first thickness gauge and is located on a 79” Herr-Voss Slitter.
- [Mexico Starts Up AGT400](https://www.advgauging.com/mexico-starts-up-agt400/) - Senior Field Service Engineer, John Fearing, started up an AGT400 at Aguascalientes Steel Coil Center. This isotope thickness gauge, located on a 72” Sonada Slitter, will measure Hot Rolled, Cold Rolled, Galvanized and Pickled Steel with a thickness range of 0.4 to 6.0 mm. Aguascalientes is a sister company of Kentucky Steel Center, which already
- [Greg Jasnikowski – Our Personal Trainer And Friend](https://www.advgauging.com/greg-jasnikowski-our-personal-trainer-and-friend/) - healthy employees
- [National Orders A Thickness Gauge](https://www.advgauging.com/national-orders-a-thickness-gauge/) - In Chicago, National Processing Company experienced a fire, but that did not stop them from upgrading an obsolete Gamma 200 to an AGT400 on a 72” Pro-Eco Pickle Line. Fortunately, no one was injured during the mishap.
- [Ohio Company Starts Up An AGT400](https://www.advgauging.com/ohio-company-starts-up-an-agt400/) - John Fearing performed a startup at Ferrous Metal Processing (Brooklyn, Ohio) on an AGT400 upgrade of a GR200 thickness gauge located on their 72” Stamco Slitter.
- [Fulton Orders A Fourth A.G.T. Gauge](https://www.advgauging.com/fulton-orders-a-fourth-a-g-t-gauge/) - Fulton County Processing in Delta, Ohio has ordered a new AGT800 Laser Thickness Gauge for use on a Butech Bliss / Nelson Steel 74” Pickling Line. The application is for the processing of various steel alloys with a thickness range of .050” to .500”. This is Fulton’s fourth AGT thickness gauge order.
- [Mexico Adds New Plant And An AGT400](https://www.advgauging.com/mexico-adds-new-plant-and-an-agt400/) - In coordination with Kentucky Steel Center, Aguascalientes Steel Coil Center in Mexico has opened its doors for hot rolled, cold rolled, galvanized and pickled steel on a 72” Sonada Slitter. Today, an AGT400 Isotope Thickness Gauge was shipped to complement this line. This will be the company’s fourth AGT400 system.
- [Ferrous Metal Processing Company Upgrades](https://www.advgauging.com/ferrous-metal-processing-company-upgrades/) - An AGT400 was shipped to Ferrous Metal Processing in Brooklyn, Ohio to upgrade a 1994 Gamma Ray 200 located on their 72” Stamco Slitter.
- [Startup For The First AGT800 Laser Thickness Gauge](https://www.advgauging.com/startup-for-the-first-agt800-laser-thickness-gauge/) - We started up our first AGT800 at Jemison Metals located in Trinity, Alabama. This gauge was sold to Butech Bliss and included as part of a 96” Stretch Leveler/Cut-To-Length line installed at their new facility. The AGT800 Laser Thickness Gauge will measure steel with a thickness range of .060” to .750” on this line.
- [Chicago Says Hello To New AGT400](https://www.advgauging.com/chicago-says-hello-to-new-agt400/) - Heidtman Steel has purchased an AGT400 Isotope Thickness Gauge for the 78” Alcos slitter at their East Chicago location. This is in addition to the AGT400 in use at their plants in Butler, Indiana; Cleveland, Ohio; Erie, Michigan and Granite City, Illinois.
- [Our First Laser Gauge Of 2014 Goes To Romulus](https://www.advgauging.com/our-first-laser-gauge-of-2014-goes-to-romulus/) - Lee Steel is staying up to date with modern technology, purchasing our state-of-the-art AGT800 Laser Thickness Gauge, which nicely compliments their two AGT400 Isotope Thickness Gauges at this facility. The newest gauge will measure .055”- .375” steel on their 74” Red Bud EPS pickle line.
- [Starting 2014 In Canada](https://www.advgauging.com/starting-2014-in-canada/) - Our Senior Field Engineer, John Fearing, traveled to Canada over The New Year’s Holiday at the customer’s request to start up a brand new AGT400 Isotope Thickness Gauge at Taylor Steel in Ontario. This system replaced an obsolete Harshaw brand thickness gauge from the eighties. It was installed on their 72” Herr-Voss slitter and it’s
- [Displaying Our Pride In America](https://www.advgauging.com/displaying-our-pride-in-america/) - Those of you who have purchased an A.G.T. thickness gauge have probably noticed the Made In U.S.A. sticker on the inside of the gauge cabinet. Since our products are designed and manufactured right here in the heartland of America, we decided our building grounds should exhibit the same sense of patriotism. Last summer, we installed
- [New Security Enhancements and Licensing Amendments!](https://www.advgauging.com/new-security-enhancements-and-licensing-amendments/) - Last year, Advanced Gauging Technologies partnered with the United States Department of Energy to perform a security enhancement audit of our facility. Using the information gained from this audit we implemented a plan to increase our existing security measures. This plan included upgrading existing radio controlled key systems, adding 24/7 surveillance cameras with night vision,
- [A.G.T. Supports The Buckeyes](https://www.advgauging.com/a-g-t-supports-the-buckeyes/) - Ohio company supports football
- [Company Cars Enhance A.G.T.'s Customer Service](https://www.advgauging.com/company-cars-enhance-a-g-t-s-customer-service/) - The A.G.T. mission statement says that we will provide “our customers with world class products and exceptional service.” In today’s modern world, flexibility is a key to providing such service. We recently purchased a third Chevy Cruze Eco for our newest field service technician, Jim Russell. Now each of our technicians has an assigned car
- [A.G.T. Gives Back](https://www.advgauging.com/a-g-t-gives-back/) - At Advanced Gauging Technologies we believe in giving back to the community. We show our gratitude by donating to various charities each year. In 2014 we sent contributable donations to the American Cancer Society, American Society from Prevention of Cruelty to Animals (ASPCA), James Cancer Hospital, Make-A-Wish Foundation, Nationwide Children’s Hospital, Operation Gratitude and Wounded
- [A.G.T. Celebrates The Holidays](https://www.advgauging.com/a-g-t-celebrates-the-holidays/) - Every year, as a company, Advanced Gauging Technologies celebrates Christmas together. We believe the holiday season is a special time of year to reflect on the year’s journey and spend time with those you love. This year, we enjoyed each other’s happiness over dinner. While mingling, many memories were made and shared and laughter filled the air.
- [A.G.T. Welcomes New Production And Inventory Assistant](https://www.advgauging.com/agt-welcomes-new-production-and-inventory-assistant/) - The newest member of the A.G.T. family is Mike Collier, our new Production and Inventory Assistant. His responsibilities include quality control, shipping, purchasing and receiving. Mike's previous experience in the Army and in the food distribution industry gives him many of the tools necessary to perform these tasks, and he is capable of assisting in
- [AGT800 Laser Gauge Featured In American Metal Market 2014 Spotlight Article](https://www.advgauging.com/agt800-laser-gauge-featured-in-american-metal-market-2014-spotlight-article/) - Metals Testing Transformed By 21st-Century Technology While larger companies dominate a significant portion of the testing equipment market, some breakthrough technologies still come out of tiny mom-and-pop companies, reminiscent of the computer technology that came out of California garages a half-century ago. For much of the past few decades, the thickness of coil, sheet or
- [A.G.T. Visits Chicago](https://www.advgauging.com/a-g-t-visits-chicago/) - With new employees comes training, which can sometimes be stressful for the employer as well as the employee. To make training simple, it is always best to offer some sort of hands on learning. Hands on can mean a lot of different things for different industries. At A.G.T. we pride ourselves on having high
- [Maquina Named As A.G.T. Sales Rep In Mexico](https://www.advgauging.com/maquina-named-as-a-g-t-sales-rep-in-mexico/) - Advanced Gauging Technologies is pleased to introduce Maquina as our new sales representative in Mexico. Daniel Bortoni is the owner and will be our primary contact for all sales and marketing activities throughout the country. Daniel and his staff have over 100 years of combined experience in the Mexican metals market. They are located in
- [World Class Service](https://www.advgauging.com/world-class-service/) - Advanced Gauging Technologies excels in all areas of customer service. Telephone Troubleshooting Most telephone calls to A.G.T. are returned within two business hours. There is no run-around, as the technician who returns your call is fully trained to provide the assistance you need. Since we regularly service nearly 400 isotope thickness gauges, you can be
- [Our Team Gets Healthy And Fit](https://www.advgauging.com/our-team-gets-healthy-and-fit/) - A few months ago, we started to get “BBG” also known as Body By Greg. BBG is a health, fitness and nutrition program, where Tuesdays and Thursdays we surrender ourselves to a forty minute exercise routine with Greg Jasnikowski (our personal trainer). We also have an opportunity to stay healthy by getting weekly nutrition
- [A.G.T. Awarded Contract For HRE Sparrows Point Project](https://www.advgauging.com/agt-awarded-contract-for-hre-sparrows-point-project/) - A.G.T. was recently awarded a contract by HRE Sparrows Point, LLC for a major source disposal project at the former Bethlehem Steel / Severstal / RF Steel mill in Sparrows Point, MD. Surprisingly, it has nothing to do with new gauge orders or service on existing gauges. We will be responsible for the removal and
- [A.G.T. Welcomes Jim Russell To Our Service Staff](https://www.advgauging.com/a-g-t-welcomes-jim-russell-to-our-service-staff/) - We want to welcome our newest Field Service Technician, Jim Russell. Jim has actually been with A.G.T. since August of 2013 and many of you have probably already had the opportunity to meet Jim as he has spent much of the past year working with John Fearing and Craig Walkup. A graduate of DeVry University
- [Radiation And How Advanced Gauging Technologies Uses It](https://www.advgauging.com/radiation-and-how-advanced-gauging-technologies-uses-it/) - Radiation is a process in which energetic particles or waves travel through a medium or space. The energy released can take one of two forms. The first form is referred to as electromagnetic radiation and includes radiation like sunlight, radar and radio waves. This form of pure energy contains no weight and is considered non-ionizing
- [Harnessing Light](https://www.advgauging.com/harnessing-light/) - Article by Gretchen Salois and appears in Modern Metals Magazine, September 2014 Above: A view of the AGT400’s C-frame from behind. Optical sensors offer alternative to nuclear-based methods for thickness gauging September 2014 - When talking radiation, red flags often pop up. News of reactor meltdowns and toxic leaks resulting in proverbial ghostlands like Chernobyl in
- [AGT800 Laser Gauge Selected As A Top Five Finalist For American Metal Markets 2014 Awards For Steel Excellence](https://www.advgauging.com/agt800-laser-gauge-selected-as-a-top-five-finalist-for-american-metal-markets-2014-awards-for-steel-excellence/) - Our new AGT800 Laser Thickness Gauge was selected as a top five finalist in American Metal Market’s fifth annual Awards for Steel Excellence. The nomination was in the Best Innovation Product category. Even though we did not receive the award, which was presented in New York on June 17th to New Star Metals Material Science

## Pages

- [Home](https://www.advgauging.com/)
- [Licenses and Certification](https://www.advgauging.com/accreditation-licensing/licenses-and-certification/)
- [Centerline & Coil Wandering Detection - AGT Centerline Gauge](https://www.advgauging.com/gauges/centerline-coil-wandering-detection-agt-centerline-gauge/) - AGT's New Centerline Gauge, capable of measuring coil centerline/width deviation. Measures accurately down to 0.005" using Keyence lasers. Can be used for metal or other material.
- [Lab Thickness Sample Gauge AGT600](https://www.advgauging.com/gauges/non-contact-sample-thickness-measurement-gauge/) - Our Lab & Line Side Thickness Gauge is best used in laboratory or quality control settings. This gauge is light, easy to install, and able to measure reliably down to 0.0004"
- [Width & centerline measurement - AGT Width](https://www.advgauging.com/gauges/strip-width-strip-centerline-measurement-system-agt-width/)
- [Mult-Width Measurement and Verification Gauge - AGT Mult-Width™](https://www.advgauging.com/gauges/mult-width/)
- [Thickness Gauge Upgrades](https://www.advgauging.com/gauges/isotope-thickness-measurement-equipment/)
- [Request Quote](https://www.advgauging.com/request-quote/)
- [Laser Thickness Gauge AGT800XT](https://www.advgauging.com/gauges/laser-thickness-gauge/) - Laser thickness measurement of any material. The AGT800 thickness gauge can measure steel, copper, aluminum, plastic, wood, gypsum, and rubber composites.
- [Careers](https://www.advgauging.com/careers/) - In 2024, Steve Venters retired and had this to say about his twelve years with A.G.T. "As I reflect upon my career, I consider my decision to accept an offer of employment at A.G.T. as the best career choice I ever made. A.G.T. is a small, privately owned company that puts both Customer Service and
- [Sales Associate](https://www.advgauging.com/careers/sales-associate/) - 🚀 Launch Your Sales Career With Us! Location: Dublin, OH (just outside Columbus) Salary: $18–$24/hour + monthly bonus 💰 Type: Full-Time | On-Site | Monday–Friday (No nights. No weekends. Ever.) 🏆 Why You’ll Love Working at A.G.T. Voted a “Best Place to Work” by Columbus Business First, Advanced Gauging Technologies is a small but mighty,
- [Field Service Technician](https://www.advgauging.com/careers/field-service-technician/) - 🚗💡 Hit the Road with InnovationJoin one of Columbus' “Best Places to Work” — where your tech skills, curiosity, and customer savvy make a real impact. 📍 Location: Dublin, OH (Travel across North America!)💼 Type: Full-time | Tech + Travel | Growth-Focused💸 Compensation: Competitive pay + bonus opportunities + perks you’ll actually use Who We
- [Non Contact Gamma Thickness Gauge AGT400](https://www.advgauging.com/gauges/isotope-non-contact-thickness-measurement/) - Thickness Range .18 to 6.35 mm (.007 to .250") steel 2.24 to 10.16 mm (.088 to .400") aluminum .13 to 4.19 mm (.005 to .165") copper, brass, nickel .48 to 10.16 mm (.019 to .400") titanium Air Gap 2" - 8" (7" nominal) Measurement range +/- 51 mm (+/- 2.01") Calibration Accuracy ± 0.2% or
- [Charities](https://www.advgauging.com/about-us/charities/) - Advanced Gauging Technologies Gives Back Each year A.G.T. gives back to to the community by donating to various charities. The current and prior charities include the following: Tunnel To Towers (2024) Since 9/11, Tunnel To Towers has been helping America’s heroes by providing mortgage-free homes to Gold Star and fallen first responder families with young
- [Plastic Sheet Extrusion Thickness Gauge](https://www.advgauging.com/gauges/plastic-extrusion-thickness-gauge/) - Real World Specifications AGT800 Extrusion Thickness Range 0.10 to 10 mm.(.004 - .400") Air Gap 119.38 mm. (4.70") Measurement Range ± 25 mm. (± 1.00") Calibration Accuracy < 5.3 μm (.21 mils) (.00020") Resolution 1μm (.04 mils) Linearity ± 14.4.0 μm (± .57 mils) IEC/IFDA (CDRH) Laser Class Class 2/Class II Analog Output Resolution 1
- [Contact Us](https://www.advgauging.com/contact-us/)
- [Isotope Source Recovery Services](https://www.advgauging.com/thickness-gauge-services/isotope-source-recovery-services/) - Advanced Gauging Technologies, L.L.C. is licensed by the United States Nuclear Regulatory Commission (USNRC) and the Ohio Department of Health (ODH) to accept isotope sources for Recovery (accept ownership of sources no longer in use), and/or Disposal (coordinate physical disposal of sources with federal and state authorities). This includes many common sealed sources used in
- [AGT600 Contact Gauge Replacement](https://www.advgauging.com/gauges/agt600-contact-gauge-replacement/) - AGT600™ Compact Laser Thickness Gauge Material Thickness 25 µm to 25.3 mm (.001 to .999”) Air Gap 76 mm (3.0”) Measurement Range +/- 38 mm (+/- 1.50”) Calibration Accuracy < 10 µm (0.39 mil) Resolution < 1 µm (0.4 mil) IEC/IFDA (CDRH) Laser Class Class 2/Class II Temperature Range 0 to 50° C (32 to
- [AGT400 Non-contact Thickness Gauge](https://www.advgauging.com/gauges/agt400-non-contact-thickness-gauge/) - Thickness Range .18 to 6.35 mm (.007 to .250") steel 2.24 to 10.16 mm (.088 to .400") aluminum .13 to 4.19 mm (.005 to .165") copper, brass, nickel .48 to 10.16 mm (.019 to .400") titanium Air Gap 2" - 8" (7" nominal) Measurement range +/- 51 mm (+/- 2.01") Calibration Accuracy ± 0.2% or
- [AGT600 Desktop Sampling Gauge](https://www.advgauging.com/gauges/agt600-desktop-sampling-gauge/) - AGT600™ Compact Laser Thickness Gauge Material Thickness 25 µm to 25.3 mm (.001 to .999”) Air Gap 76 mm (3.0”) Measurement Range +/- 38 mm (+/- 1.50”) Calibration Accuracy < 10 µm (0.39 mil) Resolution < 1 µm (0.4 mil) IEC/IFDA (CDRH) Laser Class Class 2/Class II Temperature Range 0 to 50° C (32 to
- [About Us](https://www.advgauging.com/about-us/) - WHO IS ADVANCED GAUGING TECHNOLOGIES, L.L.C.? A.G.T. has been manufacturing and servicing non-contact thickness gauges for over 25 years. To date, we have installed and serviced more non-contact thickness gauges in North American metal service centers than any other gauging company. Located in Plain City, OH, we continue our tradition of developing innovative measurement solutions
- [Team Members](https://www.advgauging.com/about-us/team_members/) - Administration Service Sales Technology Production
- [links](https://www.advgauging.com/links/) - Metal Center News
- [Thank you for registering](https://www.advgauging.com/thank-you-for-registering/) - Thank you for registering for our webinar to learn more about the AGT Mult-Width™ gauge. For basic information please visit our AGT Mult-Width™ page
- [Registration](https://www.advgauging.com/registration/)
- [Contact Gauge Replacement AGT600 Thickness Industrial](https://www.advgauging.com/gauges/strip-thickness-gauge/) - AGT600 Thickness Industrial Laser Thickness Gauge AGT600-150 Thickness Range 0.19 to 19 mm (.008 to .750”) Air Gap 50 to 279 mm (1.97 to 10.98") Measurement Range +/- 25 mm (+/- 1.00”) Calibration Accuracy < 10 µm (0.39 mil) Resolution < 1 µm (0.4 mil) Laser Class Class 2/Class II Temperature Range 0 to 50°
- [Online Invoice Payment](https://www.advgauging.com/customer-only/online-invoice-payment/) - Pay An Invoice Want to pay your Advanced Gauging Technologies Invoice via credit card? Enter your invoice number below and press the Pay Now button. On the next screen enter the amount of the invoice on the left hand side in the item price box and press update. To pay with a credit card, click
- [Troubleshooting Tips](https://www.advgauging.com/troubleshooting-tips/)
- [Service, Support, and Start Up](https://www.advgauging.com/thickness-gauge-services/) - Advanced Gauging Technologies (A.G.T.) is the premier isotope thickness gauging company in the steel service center market. Our field service engineers have over 65 years combined experience in the thickness gauging industry and service nearly 400 isotope thickness gauges semi-annually in North America alone. A.G.T. has vast experience in servicing a multitude of non-contact isotope
- [Applications](https://www.advgauging.com/applications/) - Thickness and width gauges from Advanced Gauging Technologies can help ensure your quality and provide documented proof for the material you are supplying or using. We have our laser and isotope thickness gauges in mills, service centers and processors worldwide. Here are some of the applications where you will find our gauges. Metal Processing Lines
- [Parts Store](https://www.advgauging.com/shop/)
- [Terms and Shipping](https://www.advgauging.com/terms-shipping/) - These Terms and Shipping policies are for parts offered on the website. Terms and Shipping for our thickness gauges will be included in the proposal for the equipment. Payment for parts on this website are via PayPal either with a PayPal account or credit card. Shipping for most items will be via UPS. For items
- [Measuring Made Easy](https://www.advgauging.com/measuring-made-easy/)
- [Accreditation & Licensing](https://www.advgauging.com/accreditation-licensing/) - U.S. Nuclear Regulatory Commission Canadian Nuclear Safety Commission Ohio Department of Health Association for Iron & Steel National Institute of Standards and Technology Agreement States Map Licenses and Certifications
- [Products](https://www.advgauging.com/gauges/) - page only for organization
- [Customers Only](https://www.advgauging.com/customer-only/) - [wpmem_form login redirect_to="https://www.advgauging.com//customer-log-in/customer-information/"]
- [Thank you for your interest](https://www.advgauging.com/thank-you-for-your-interest/) - Thank you for your interest. We will get back with you shortly.
- [Statistical Process Control – charts](https://www.advgauging.com/statistical-process-control-charts/)
- [Celebrate A.G.T.'s 20th Anniversary!](https://www.advgauging.com/20-percent-off/)
- [Blog](https://www.advgauging.com/blog-2/)
- [Brochures & Papers](https://www.advgauging.com/brochures-papers/)
- [What's new sign up](https://www.advgauging.com/whats-new-sign-up/) - Sign up to keep up with what's happening at A.G.T. and what's new in gauging. It's going to be a busy year.
- [A.G.T. History](https://www.advgauging.com/about-us/a-g-t-history/) - A History of Advanced Gauging Technologies Ron Cook spent many years servicing and eventually selling thickness gauges. He found the work interesting, and really enjoyed working with many of his customers. Over time, he started to envision a company based solely around customer service and satisfaction. In 1983, he finally made the decision to start
- [Offline Data Analysis](https://www.advgauging.com/gauges/offline-data-analysis/) - Offline Data Analysis was developed to allow customers more access to coil reports created by the Thickness Gauge & S.P.C. Reporting System. The program enables customers to recall reports from one or more gauges simultaneously via a company network or USB stick. Coil reports can be accessed without interrupting the gauge measurement or the line
- [S.P.C. and Reporting](https://www.advgauging.com/gauges/spc-and-reporting/)
- [Coil Defect Tracking](https://www.advgauging.com/gauges/coil-defect-tracking/) - Coil Mapping™ is the only remote defect tracking system available in the thickness gauging market. Coil Mapping™ allows the establishment of up to 25 different defect types. As your inspectors spot coil defects, they simply press buttons to start and stop the footage count for each respective defect. The thickness gauge is already measuring linear
- [Gamma, X-ray, Laser Gauge Comparison](https://www.advgauging.com/gauges/laser-x-ray-gamma-gauge-comparison/) - AGT400 Isotope Thickness Gauge AGT600 Laser Thickness Gauge AGT800 Laser Thickness Gauge Competitive X-ray Thickness Gauge Purchase Price Low to Medium Low Low to Medium High to Extremely High Air Gap 2 - 12" 2" 2 - 12" Varies Measured Materials Various Metals All All Vary by kV Alloy Sensitivity Low None None Varies
- [formtest](https://www.advgauging.com/formtest/)
- [Pipe & Pole Wall Thickness Measuring System](https://www.advgauging.com/gauges/pipe-pole-wall-thickness-measuring-system/)
- [Offer Testimonial](https://www.advgauging.com/customer-only/offer-testimonial/)
- [Radiation Training](https://www.advgauging.com/thickness-gauge-services/radiation-training/)
- [Newsletters](https://www.advgauging.com/newsletters/) - The Gauging Times™ - Quarterly Newsletter Every quarter, Advanced Gauging Technologies releases a physical newsletter that we send via postal mail to everyone on our mailing list. Dubbed The Gauging Times™, each newsletter comes as a two page quick read of events happening at AGT, in the thickness gauging industry, or with our customers.
- [Thickness Gauge Customers](https://www.advgauging.com/about-us/thickness-gauge-customers/) - Alternative content
- [Customer Information](https://www.advgauging.com/customer-only/customer-information/)
- [Privacy and Usage](https://www.advgauging.com/privacy-and-usage/) - This Privacy Policy governs the manner in which Advanced Gauging Technologies L.L.C. collect, use, maintain and disclose information collected from visitors (each, a “Visitor”) of the advgauging.com website (“Site”). This privacy policy applies to the Site and all products and services offered by Advanced Gauging Technologies L.L.C. Personal identification information We may collect personal identification
- [Quote Request Submitted](https://www.advgauging.com/request-quote/quote-request-submitted/) - Thanks for filling out our form! Your information has successfully been sent to us. Please allow 24-48 hours for us to reply to you. In the meantime, feel free to look around our site some more, and please let us know if you have any questions or comments! Thanks, Advanced Gauging
- [Thank you for contacting us](https://www.advgauging.com/contact-us/thank-contacting-us/) - Thank you for contacting Advanced Gauging Technologies L.L.C. We will be back in contact shortly.
- [Thank you for your request](https://www.advgauging.com/thank-you-for-your-request/) - Thanks for filling out our form! Your information has successfully been sent to us. Please allow 24-48 hours for us to reply to you. In the meantime, feel free to look around our site some more, and please let us know if you have any questions or comments! Thanks, Advanced Gauging
- [International](https://www.advgauging.com/international/) - Worldwide Sales India Sales India@AdvGauging.com
- [Reviews](https://www.advgauging.com/about-us/testimonials/) - Testimonials & Reviews
- [U.S. Patent #9151595](https://www.advgauging.com/about-us/u-s-patent-9151595/)
- [Equipment Manuals](https://www.advgauging.com/customer-only/equipment-manuals/)
- [W9 Request](https://www.advgauging.com/customer-only/w9-request/)
- [Update Information](https://www.advgauging.com/customer-only/update-information/) - [wpmem_logged_in][wpmem_form user_edit][/wpmem_logged_in]
- [Register](https://www.advgauging.com/customer-only/register/) - [wpmem_form register redirect_to="/customer-information/"]
- [Newsletter Signup](https://www.advgauging.com/newsletters/newsletter-signup/) - Subscribe To The Gauging Times™ Quarterly Newsletter Our newsletter is mailed to thousands of customers and enthusiasts each quarter. If you are interested in receiving our newsletter please enter the information below. * Denotes Required Field
- [Thank You](https://www.advgauging.com/newsletters/thank-you/) - Thanks for subscribing to our quarterly newsletter! You will receive your first newsletter as soon as it becomes available. In the meantime, feel free to look around our site some more, and please let us know if you have any questions or comments! Thanks, Advanced Gauging
- [Old Request Quote](https://www.advgauging.com/about-us/old-request-quote/) - * Denotes Required Field
- [The Gauging Times - Issue 59 - January, 2017](https://www.advgauging.com/newsletters/the-gauging-times-issue-59-january-2017/) - Training Recently, Advanced Gauging employees completed our annual radiation safety training class to keep on top of the latest standards and safety regulations for the industry. Partnering with Keyence Advanced Gauging Technologies manufactures laser thickness gauging systems exclusively using Keyence laser sensors. After a year of in-house sensor testing from several companies produced in different
- [The Gauging Times - Issue 58 - October, 2016](https://www.advgauging.com/newsletters/the-gauging-times-issue-58-october-2016/) - Meet Our Newest Team Member When you call A.G.T. you are likely to hear the sunshine in the voice of our newest team member, MeLisa Williams. MeLisa started her career with A.G.T. in February 2016. She brings a Bachelor’s degree in Business Management from Ohio University and over 20 years of office experience. Her solid
- [The Gauging Times - Issue 57 - July, 2016](https://www.advgauging.com/newsletters/the-gauging-times-issue-57-july-2016/) - BREAKING NEWS... A.G.T. launches it’s first pipe and pole wall thickness measurement system. McWane Ductile out of Coshocton, Ohio has purchased two AGT800s. This customized laser gauge will measure wall thickness of various cast pipe and poles. TEAM A.G.T. has built a strong customer-focused foundation, starting with exceptional employees. Each quarter, we show our appreciation
- [The Gauging Times - Issue 56 - April, 2016](https://www.advgauging.com/newsletters/the-gauging-times-issue-56-april-2016/) - AGT600 Sneak Preview We are excited to share a preview for the upcoming release of our newest compact laser thickness gauge, the AGT600. This newest addition to the A.G.T. product family is designed to provide fast and reliable real time thickness measurement for the monitoring and control of material processing lines such as rolling and
- [The Gauging Times - Issue 55 - January, 2016](https://www.advgauging.com/newsletters/the-gauging-times-issue-55-january-2016/) - Want a Competitive Edge? So what is the big deal about thickness gauges anyway? A competitive edge. That’s right, they give you an advantage over companies who simply do not have gauges. Imagine a constant, precise thickness reading throughout the entire length of your coil….and the best part? You never have to stop the line
- [The Gauging Times - Issue 54 - October, 2015](https://www.advgauging.com/newsletters/the-gauging-times-issue-54-october-2015/) - Harnessing Solar Radiation Here at Advanced Gauging Technologies, we take pride in being innovative. Since our most recent idea is now operational, we wanted to share the exciting news with you! In an effort to be cutting edge and create a more environmentally friendly workplace, we have installed 124 solar panels atop the roof of
- [The Gauging Times - Issue 53 - July, 2015](https://www.advgauging.com/newsletters/the-gauging-times-issue-53-july-2015/) - Keyence Features AGT800 Laser Gauge in New Case Study Article Keyence America is featuring our new AGT800 Laser Thickness Gauge in a Case Study Article titled “A.G.T. Revolutionizes Thickness Gauging with Keyence Laser Sensors”. The article focuses on how A.G.T. has introduced a revolutionary alternative to traditional isotope and x-ray gauges, that are used to
- [The Gauging Times - Issue 52 - April, 2015](https://www.advgauging.com/newsletters/the-gauging-times-issue-52-april-2015/) - A.G.T Welcomes Mike Collier! The latest addition to the A.G.T. family is Mike Collier, our new Production and Inventory Assistant. His responsibilities include coordinating production schedules, quality control, shipping, purchasing and receiving. Mike’s previous experience in the Army and food distribution industry gives him many tools necessary to perform these tasks. He is also capable
- [The Gauging Times - Issue 51 - January, 2015](https://www.advgauging.com/newsletters/the-gauging-times-issue-51-january-2015/) - Isotope Source Disposal and Recovery Now Available! Do you have a radioactive source sitting around taking up space and costing money to meet federal and/or state leak test requirements? If so, read closely because we have some very exciting news! Advanced Gauging Technologies, L.L.C. has been awarded a contract by HRE Sparrows Point, LLC for
- [The Gauging Times - Issue 50 - October, 2014](https://www.advgauging.com/newsletters/the-gauging-times-issue-50-october-2014/) - Our Customer Service Promise Here at A.G.T., part of our company mission statement says that we will provide “our customers with world class products and exceptional service.” We offer unlimited technical support via phone, email, fax, and internet at no charge. We also provide thickness gauge software updates at no charge. Semi-annual service visits with
- [The Gauging Times - Issue 49 - July, 2014](https://www.advgauging.com/newsletters/the-gauging-times-issue-49-july-2014/) - AGT800 Laser Thickness Gauge Featured In Three Industry Magazines The revolutionary AGT800 Laser Thickness Gauge has been extremely well received in the metals industry. In fact, our new product has been featured in three different 2014 industry magazine articles. American Metal Market’s April Market Spotlight on Metal Testing Equipment was devoted primarily to thickness gauging
- [The Gauging Times  - Issue 48 - April, 2014](https://www.advgauging.com/newsletters/the-gauging-times-issue-48-april-2014/) - Personal Profile Many of you have already met our newest field service technician, Jim Russell, who joined A.G.T. in August 2013. For the past six months, Jim has been traveling with Craig Walkup and John Fearing servicing gauges and meeting all of our customers. A graduate of DeVry University with an Associates Degree in Electronic
- [The Gauging Times  - Issue 47 - January, 2014](https://www.advgauging.com/newsletters/the-gauging-times-issue-47-january-2014/) - Gauge Computer Technology Continues To Evolve Thickness gauges utilizing PC-based computers have many advantages. Common mass produced parts provide cost benefits and reliability. Standard operating systems provide user familiarity and comfort, communications and networking are compatible with already established office networks, advances in hardware and software offer improved future performance and the list goes on.
- [The Gauging Times  - Issue 46 - October, 2013](https://www.advgauging.com/newsletters/the-gauging-times-issue-46-october-2013/) - First Production AGT800 Laser Gauge Shipped After more than a year in research and development, we are proud to announce the completion of our new model AGT800 Laser Thickness Gauge. The AGT800 is a revolutionary online gauging system that can measure virtually any strip material from .040 to .750” (1 to 19 mm) in thickness.
- [The Gauging Times - Issue 45 - July, 2013](https://www.advgauging.com/newsletters/the-gauging-times-issue-45-july-2013/) - Laser Thickness Gauge Development We have spent most of the last year developing our next product, which will be a laser triangulation based thickness gauge. Final testing is currently underway, and the forthcoming laser gauge is close to becoming a reality. The C-frame air gap will be 12.2” (310 mm.), and the system will be
- [The Gauging Times - Issue 44 - April, 2013](https://www.advgauging.com/newsletters/the-gauging-times-issue-44-april-2013/) - Personal Profile If you have received a sales call or sales related email from us recently, it most likely came from Steve Venters, our new Sales Manager. Steve joined A.G.T. in September and has become our main contact for all sales related issues. He brings with him over twenty-five years of sales and marketing experience,
- [Michael C. Bertin, Ph.D.](https://www.advgauging.com/about-us/team_members/michael-c-bertin-ph-d/) - The launch of Sputnik changed Mike Bertin's life. The lad had wanted to be a field biologist and herpetologist, but the impending technology revolution attracted him. Mike decided on a career in physics and pursued that goal at the Bronx High School of Science, MIT (B.S. in physics), Rutgers University (Ph.D. in nuclear physics), and
- [John Fearing](https://www.advgauging.com/about-us/team_members/john-fearing/) - John was born on Easter Sunday in 1967 and his birthday has only fallen on Easter four times since. He has always had a wandering spirit. As a child his mother had a hard time keeping him home. John was always exploring the hills of southern Ohio, where he was born and raised. He graduated
- [Mike Collier](https://www.advgauging.com/about-us/team_members/mike-collier/) - One of the latest additions to the A.G.T. family is Mike Collier, our Production and Inventory Assistant. His responsibilities include quality control, purchasing, shipping, and receiving. Mike’s previous experiences in the Army and the food distribution industry provide him with many of the tools necessary to perform these tasks. He is also capable of assisting
- [Jim Russell](https://www.advgauging.com/about-us/team_members/jim-russell/) - Born in Indianapolis, Indiana, Jim was the youngest of four boys. The family moved to Marion, Ohio when Jim was six years old, and he still resides in this area today with his wife Dolly. They have four children, one daughter-in-law, two son-in-laws, and four grandchildren. Jim attended Pleasant Local High School in Marion where
- [Scott Cook](https://www.advgauging.com/about-us/team_members/scott-cook/) - Scott was born in Massachusetts and moved to Ohio when he was three years old. He started working various jobs as soon as he began high school, and he’s been a self-driven, overachieving, entrepreneurial workaholic ever since. Always fascinated by electronics and technology, Scott read and studied all ten thousand pages of his father Ron’s
- [Steve Venters](https://www.advgauging.com/about-us/team_members/steve-venters/) - If you have received a sales call from us lately, it may very well have come from Steve Venters, our Sales and Marketing Manager. Steve joined Advanced Gauging Technologies in September 2012 and has become our primary contact for all sales and marketing related issues. He brings over 28 years of sales and marketing experience,
- [Todd Allen](https://www.advgauging.com/about-us/team_members/todd-allen/)
- [The Gauging Times - Issue 39 - January, 2012](https://www.advgauging.com/newsletters/the-gauging-times-issue-39-january-2012/) - Personal Profile Many of you have already met our latest employee, Craig Walkup. Craig was born and raised in the small West-Central Ohio town of Wapakoneta. He is a 1999 Graduate of Wapakoneta Senior High School. Growing up, fascinated by computers and electronics, his natural next step in his life was to attend college and
- [The Gauging Times - Issue 38 - October, 2011](https://www.advgauging.com/newsletters/the-gauging-times-issue-38-october-2011/) - Free AGT400 Software Update! As we have done many times over the years, we are once again releasing a software update to improve upon the AGT400. As usual, this software update is free of charge to our customers and will be installed during a normal semi-annual service visit. Like most updates, many of the changes
- [The Gauging Times - Issue 43 - January, 2013](https://www.advgauging.com/newsletters/the-gauging-times-issue-43-january-2013/) - Can you hear me now? Using the average measured thickness of the material along with the footage count from the encoder (tachometer), the gauge calculates the size of the exit coil in real time and displays it on the main screen for easy reference. This feature is available in our latest version of software which
- [The Gauging Times - Issue 42 - October, 2012](https://www.advgauging.com/newsletters/the-gauging-times-issue-42-october-2012/) - A.G.T. Acquires Company Vehicles Advanced Gauging Technologies went through some exciting growth changes beginning in July. Some of these changes we will discuss in later newsletters but one of the most exciting was the addition of two new company owned travel vehicles for our field service engineers. Prior to this they had been using their
- [The Gauging Times - Issue 41 - July, 2012](https://www.advgauging.com/newsletters/the-gauging-times-issue-41-july-2012/) - A.G.T. Online Parts Store Is Live In June, A.G.T. began offering various gauge parts for sale through our new online store. Divided into categories for easy navigation, the new online store allows our customers to purchase most of the common spare parts needed to keep their AGT400, Gamma 100, Gamma 200 and Loral/DMC/Weston gauges operational.
- [The Gauging Times - Issue 40 - April, 2012](https://www.advgauging.com/newsletters/the-gauging-times-issue-40-april-2012/) - Thank You! This month A.G.T. celebrates its 15th year anniversary and we would like to thank each and every one of our customers. Without you we would not be the healthy, growing, and innovative company that we are today. In addition to turning 15, we are also celebrating our 200th AGT400 thickness gauge sale this
- [The Gauging Times - Issue 37 - July, 2011](https://www.advgauging.com/newsletters/the-gauging-times-issue-37-july-2011/) - Dan's 10th Anniversary! It is hard to believe that ten years have gone by since A.G.T. hired Dan Marchio. Dan was originally hired in 2001 as a Service Technician and, like A.G.T., he has grown in many ways. He quickly showed the ability to handle greater responsibilities and duties eventually becoming the Production Manager in
- [The Gauging Times - Issue 36 - April, 2011](https://www.advgauging.com/newsletters/the-gauging-times-issue-36-april-2011/) - Capital Expense Tax Break! The Jobs Act, recently passed by the U.S. Government, increases the Section 179 expense limit to $500,000 for tax years beginning in 2010 and 2011. Within this $500,000 limit, taxpayers are temporarily allowed to expense up to $250,000 of the cost of qualified retail improvement property and qualified leasehold improvement property.
- [The Gauging Times - Issue 35 - January, 2011](https://www.advgauging.com/newsletters/the-gauging-times-issue-35-january-2011/) - Free AGT400 Software Update! As we have done many times over the years, we are once again releasing a software update to improve upon the AGT400. As always, this software update is free of charge to our customers and will be installed during a normal semi-annual service visit. We are in the final stages of
- [The Gauging Times - Issue 33 - July 2010](https://www.advgauging.com/newsletters/the-gauging-times-issue-33-july-2010/) - ELE-EME Company Profile! We are excited to announce our partnership with ELE-EME, S.A. de C.V., located near Mexico City, to be our representative for the AGT400 system in all of Mexico. ELE-EME was formed in 1980 by Roberto Juárez with the purpose of providing preventative and corrective maintenance on various brands of equipment, such as
- [The Gauging Times - Issue 32 - April, 2010](https://www.advgauging.com/newsletters/the-gauging-times-issue-32-april-2010/) - 2010 Pricing Unchanged! With the economic situation that has been upon us since the recession started in 2008 things have been really difficult for everyone. As we look around, many of our customers are just now starting to come out of this devastating downturn. It is assumed that most of us have felt the pain
- [The Gauging Times - Issue 31 - January, 2010](https://www.advgauging.com/newsletters/the-gauging-times-issue-31-january-2010/) - Personal Profile In Issue 26 of the Gauging Times, we highlighted Scott Cook's successful trip to the World Series of Poker (W.S.O.P.) in 2008, where he won $14,138 by finishing 32nd out of 1,397 players in Event #13. That was quite a feat for only his second trip to the W.S.O.P., and we all knew
- [The Gauging Times - Issue 30 - October, 2009](https://www.advgauging.com/newsletters/the-gauging-times-issue-30-october-2009/) - U.S.N.R.C. Fines Just a reminder to be sure you are having your semi-annual radiation leak tests done. The United States Nuclear Regulatory Commission (U.S.N.R.C.) requires that all sealed source integrity tests be completed at the prescribed times and by licensed companies. If these rules are not followed, it will lead to very costly fines that
- [The Gauging Times - Issue 29 - July, 2009](https://www.advgauging.com/newsletters/the-gauging-times-issue-29-july-2009/) - Personal Profile It's not often that someone leaves the A.G.T. family but unfortunately for us, we must bid one of our employees a fond farewell. Some of you may remember Dave Caddell from issue 15, back in 2005. At the time, Dave was attending Devry University, majoring in Networking and Communications Management. Dave was hired
- [The Gauging Times - Issue 28 - April, 2009](https://www.advgauging.com/newsletters/the-gauging-times-issue-28-april-2009/) - Personal Profile The latest addition to the A.G.T. family is Todd Allen. Todd, brought on as our Business Development Manager, will be responsible for several aspects of the company including website development, computer troubleshooting and repair, business growth, and networking. Todd has the ability to perform many tasks, and this new position will no doubt
- [The Gauging Times - Issue 27 - January, 2009](https://www.advgauging.com/newsletters/the-gauging-times-issue-27-january-2009/) - Radiation/Am241 Information When many people hear the words radiation, nuclear, isotope, and/or source, they are often intimidated by them. Some people will ask if they will start to glow, and guys will also wonder if they 'will be able to have kids' sometime down the road. The truth is, these are two common misconceptions about
- [The Gauging Times - Issue 26 - October, 2008](https://www.advgauging.com/newsletters/the-gauging-times-issue-26-october-2008/) - Diagnostic Data Features The AGT400 Diagnostic Data Page has been featured a few times in this newsletter through the years, so most people are probably already familiar with this aspect (one that is way ahead of the curve in the gauging world). In our last issue of the Gauging Times, we pointed out all of
- [The Gauging Times - Issue 25 - July, 2008](https://www.advgauging.com/newsletters/the-gauging-times-issue-25-july-2008/) - Tech Tip - Defect Menu The AGT400 Defect Menu is an extremely user-friendly window that can be set up to display and track up to 25 defects you may encounter during the course of production. Completely customizable, the Defect Menu can be used to track the defects most common to your specific business. When a
- [The Gauging Times - Issue 24 - April, 2008](https://www.advgauging.com/newsletters/the-gauging-times-issue-24-april-2008/) - Tech Tip - Product Menu The AGT400 Product Menu is the most advanced, user friendly product menu in use. As most of our customers know, we've set the industry standard for Product Menu usefulness and functionality. While many of you are very aware of this feature, and currently use it, we would like to offer
- [The Gauging Times - Issue 23 - January, 2008](https://www.advgauging.com/newsletters/the-gauging-times-issue-23-january-2008/) - Weston, Loral, and Measurex Upgrades Available! In our last newsletter we announced our ability to upgrade DMC 410 and 450 gauges to the AGT400. We are excited to make a similar announcement in this edition. A.G.T. now has the ability to upgrade the Weston 5310, Loral 3500, and Measurex 350 thickness gauges! As with the
- [The Gauging Times - Issue 22 - October, 2007](https://www.advgauging.com/newsletters/the-gauging-times-issue-22-october-2007/) - Software Update ver 3.11 As we have done many times over the years, we are once again releasing a software update to improve upon the AGT400. Our last update focused primarily on switching our gauging platform over to WindowsXP®. During that time, several other improvements were made, but were not released. This was due to
- [The Gauging Times - Issue 21 - July, 2007](https://www.advgauging.com/newsletters/the-gauging-times-issue-21-july-2007/) - Beat the Boss Challenge Recently we were all sitting around having lunch when the topic of who could beat whom in a foot race came up. A good bit of trash talking took place between Dan and Scott (who fancies himself quite the athlete despite that ever increasing age thing). As you can guess, a
- [The Gauging Times - Issue 20 - April, 2007](https://www.advgauging.com/newsletters/the-gauging-times-issue-20-april-2007/) - Personal Profiles In this, the 20th edition of The Gauging Times™, and coinciding with our 10 year anniversary, we want to spotlight one of our founders, Scott Cook. Scott, who was born in Quincy, Massachusetts in 1964, moved to Ohio at the age of three. It was there that he began his fascination with electronics.
- [The Gauging Times - Issue 19 - January, 2007](https://www.advgauging.com/newsletters/the-gauging-times-issue-19-january-2007/) - Personal Profiles In this issue's Personal Profile section of The Gauging Times™, we introduce you to our newest Field Service Engineer, Jeffrey Rector. Many of you have already met Jeff during semi-annual visits over the past six months, as he has been traveling with John and Chad performing most of the service. Jeff obtained his
- [The Gauging Times - Issue 18 - October, 2006](https://www.advgauging.com/newsletters/the-gauging-times-issue-18-october-2006/) - Personel Profiles In this issue's Personal Profile section of The Gauging Times™, believe it or not, we aren't going to talk about Dan Marchio. Instead, we are going to touch on another five year mark for one of our guys. Chad Weese was originally hired in 2001 as a Field Service Engineer. His job duties
- [The Gauging Times - Issue 17 - July, 2006](https://www.advgauging.com/newsletters/the-gauging-times-issue-17-july-2006/) - Personel Profiles In keeping with the Dan Marchio theme from the last issue of The Gauging Times™, we once again are making him the center of attention. This time, we are celebrating Dan's five year mark with A.G.T., which he reached in the spring of 2006. Dan was originally hired in 2001 as a Service
- [The Gauging Times - Issue 16 - April, 2006](https://www.advgauging.com/newsletters/the-gauging-times-issue-16-april-2006/) - Personel Profiles As many of us here at A.G.T. had wagered, Dan Marchio was the first of us to attach the old ball and chain. Dan, and his new wife Jenifer, were married on February 17th down on the beautiful beaches of Cancun, Mexico. Several friends and members of both families made the trip to
- [The Gauging Times - Issue 15 - October, 2005](https://www.advgauging.com/newsletters/the-gauging-times-issue-15-october-2005/) - Personal Profiles As many of you know, 2004 was a record year for Advanced Gauging in terms of new gauge sales. Keeping up with the demand has been a good challenge, and help was needed. In July of this year, we hired our first part-time employee, Dave Caddell, to help build circuit boards, cables and
- [The Gauging Times - Issue 14 - July, 2005](https://www.advgauging.com/newsletters/the-gauging-times-issue-14-july-2005/) - Five Year Anniversary! A milestone of sorts has been reached by our Senior Field Service Engineer here at Advanced Gauging. John Fearing reached the five year mark with us on July 1, 2005. Since John joined the team, A.G.T. has doubled in size and moved into a new facility. We are proud to say that
- [The Gauging Times - Issue 13 - April, 2005](https://www.advgauging.com/newsletters/the-gauging-times-issue-13-april-2005/) - Personal Profiles As many of our customers have known for years, we at A.G.T. are always looking for ways to improve our top-of-the-line thickness gauge. Our interface and software are what make our gauge the best in the market. To that end, we are consistently upgrading our AGT400 software, and we don't just trust that
- [The Gauging Times - Issue 12 - January, 2005](https://www.advgauging.com/newsletters/the-gauging-times-issue-12-january-2005/) - AGT Makes The Move! We are pleased to announce that A.G.T. has moved! After seven years of building gauges, servicing competitor's gauges, and assisting over 165 customers in a 2,500 square foot building, A.G.T. has now made the move to a new 12,000 square foot facility which will be shared with Scott's other company -
- [The Gauging Times - Issue 11 - September, 2004](https://www.advgauging.com/newsletters/the-gauging-times-issue-11-september-2004/) - System Manual Complete After several man-months of work, the AGT400 Thickness Gauge & S.P.C. Reporting System Manual is now complete! A copy of our System Manual was provided at no charge for each of the 100-plus AGT400's in service. Additional copies of the manual may be purchased by ordering part number MAN-400. We hope you
- [The Gauging Times - Issue 9 - October, 2002](https://www.advgauging.com/newsletters/the-gauging-times-issue-9-october-2002/) - Products and Alloys You can measure a wide variety of materials with modern AGT400 thickness gauges. Our extensive Product Menu also permits accurate overall thickness measurements of coated products. We accomplish what many competitive gauges cannot by using two separate calibration offsets in our Product Menu. Gain is used to compensate for different substrate densities
- [The Gauging Times - Issue 8 - July, 2002](https://www.advgauging.com/newsletters/the-gauging-times-issue-8-july-2002/) - Personal Profile Chad Weese is the newest Field Service Engineer for Advanced Gauging Technologies (A.G.T.). Many Customers have already met Chad during semi-annual visits over the last nine months. Chad obtained his electronics training and experience during his six years in the U.S. Navy as an Electronics Warfare Technician. His time in the service included
- [The Gauging Times - Issue 7 - February, 2002](https://www.advgauging.com/newsletters/the-gauging-times-issue-7-february-2002/) - Personal Profile Daniel J. Marchio is the newest Service Technician for Advanced Gauging Technologies. In March of 2001, he graduated from DeVry Institute of Technology with an Associate of Applied Science in Electronics and Computer Technology. Upon graduation, Dan joined the team at A.G.T. to perform such duties as assembly and testing of the AGT400,
- [The Gauging Times - Issue 6 - October, 2001](https://www.advgauging.com/newsletters/the-gauging-times-issue-6-october-2001/) - Ronald L. Cook 1939-2001 Ronald L. Cook 1939-2001 We are extremely sad to report our loss of Ron Cook to multiple myeloma (a rare form of bone cancer) on August 4, 2001 at the young age of 62. Ron was born and raised in the central Ohio area. Always an overachiever, he received both his
- [The Gauging Times - Issue 5 - May, 2001](https://www.advgauging.com/newsletters/the-gauging-times-issue-5-may-2001/) - Personal Profile John P. Fearing is the newest Field Service Engineer for Advanced Gauging Technologies (A.G.T.). Many customers have already met John during semi-annual visits over the last year. You could also see John if you purchase a new gauging system, as he also does quite a few commissionings. John’s background reads as a who’s
- [The Gauging Times - Issue 4 - January, 2001](https://www.advgauging.com/newsletters/the-gauging-times-issue-4-january-2001/) - Personal Profile Robert J. Cook Bob Cook handles Manufacturing and Assembly at Advanced Gauging. He is a certified welder, and supervises the building of all our measuring head mounting structures (C-Frames). His mechanical background is applied towards solving unique application challenges. Having been one of the top ASE Master Technicians for Pontiac in the past,
- [The Gauging Times - Issue 3 - October, 2000](https://www.advgauging.com/newsletters/the-gauging-times-issue-3-october-2000/) - Personal Profile The launch of Sputnik changed Mike Bertin’s life. The lad had wanted to be a field biologist and herpetologist, but the impending technology revolution attracted him. Mike decided on a career in physics and pursued that goal at the Bronx High School of Science, MIT (B.S. in physics), Rutgers University (Ph.D. in nuclear
- [The Gauging Times - Issue 2 - July, 2000](https://www.advgauging.com/newsletters/the-gauging-times-issue-2-july-2000/) - Personal Profile Scott A. Cook In 1982, Scott Cook began his professional career in the automotive aftermarket industry. He worked his way up through the ranks of a regional store chain, and was promoted to merchandise buyer in 1987. Scott spent some time as sales manager for a wholesale automotive company, and eventually became the
- [The Gauging Times - Issue 1 - April, 2000](https://www.advgauging.com/newsletters/the-gauging-times-issue-1-april-2000/) - Personal Profile

## Soliloquy Sliders

- [new home](https://www.advgauging.com/?post_type=soliloquy&p=3909)
- [home](https://www.advgauging.com/?post_type=soliloquy&p=3228)

## Testimonials

- [Michael Welch - Vice President of Operations](https://www.advgauging.com/?testimonial=575) - Advanced Gauging has upgraded all three of our obsolete Gamma GR100 Thickness Gauges. The AGT400 thickness gauges are exceptionally stable compared to our old gauges, and their software allows us to automatically download all of the necessary coil data after each coil run. Their support team has always been professional, responsive, and well equipped to
- [Marco A. Bellisario - Vice President/General Manager](https://www.advgauging.com/?testimonial=577) - Advanced Gauging Technologies (A.G.T. as we refer to them) is an outstanding supplier to our organization. They are an integral part of the management of our nuclear gauges. A.G.T. is a very special company for a number of reasons, namely they give us a worry free solution to our nuclear gauging requirements. They have an
- [Mark White - Operations Manager](https://www.advgauging.com/?testimonial=579) - I have been an Advanced Gauging Technologies customer since the mid 1980's, and whether it was the semi-annual inspections, service assistance, or the purchase and installation of an AGT400, the interactions with A.G.T. have always been nothing short of professional. The technicians are not only highly trained, but field experienced. Customer service and corresponding documentation
- [Luis Ponte - Operations Manager](https://www.advgauging.com/?testimonial=580) - We purchased our first AGT400 thickness gauging unit in 1999 and since then we have purchased an additional 3 units for our other processing equipment. Advanced Gauging's product has proven to be reliable, easy to use, and has continually delivered accurate results. In addition, the staff at A.G.T. have been knowledgable and have provided us
- [Vince Gallo - Plant Manager](https://www.advgauging.com/?testimonial=854) - Over the past 20 years, the AGT experience has been a very positive and beneficial one for us, from the first gauge we purchased to our most current order. Their professionalism has never wavered, even through challenging periods in our industry, and has been driven by their uncompromising commitment to excellence. The AGT team has
- [Rob Miklavcic - Plant Manager](https://www.advgauging.com/?testimonial=856) - I have worked with Advanced Gauging Technologies for over 15 years and have never been disappointed. AGT’s technical service representatives are truly experts in their field. Their reporting options and user interface are easy to use and extremely accurate. I would recommend AGT to anyone looking to purchase, upgrade or service their gauges.
- [Connor Mitchell - CI/SPC Manager](https://www.advgauging.com/?testimonial=2755) - McWane Ductile Ohio (MDO) reached out to Advanced Gauging Technologies (AGT) in 2016 to inquire about profiling the iron thickness of our ductile cast iron utility poles. MDO manufactures 18 foot tapered pole segments and then, through an assembly process, presses the segments together, yielding the requested full length utility pole. MDO purchased two AGT

## Categories

- [Advanced Gauging Technologies](https://www.advgauging.com/category/advanced-gauging-technologies/)
- [Radiation](https://www.advgauging.com/category/radiation/)
- [AGT800](https://www.advgauging.com/category/agt800/)
- [Magazine Article](https://www.advgauging.com/category/magazine-article/)
- [Mexico](https://www.advgauging.com/category/mexico/)
- [Sales & Marketing](https://www.advgauging.com/category/sales-marketing/)
- [Staff](https://www.advgauging.com/category/staff/)
- [Health and Fitness](https://www.advgauging.com/category/health-and-fitness/)
- [Service](https://www.advgauging.com/category/service/)
- [AGT400](https://www.advgauging.com/category/agt400/)
- [Laser Thickness](https://www.advgauging.com/category/laser-thickness/)
- [Isotope Gauge](https://www.advgauging.com/category/isotope-gauger/)
- [Gamma Gauge](https://www.advgauging.com/category/gamma-gauger/)
- [Laser Gauge](https://www.advgauging.com/category/laser-gauge/)
- [AGT1000](https://www.advgauging.com/category/agt1000/)
- [AGT Mult-Width gauge](https://www.advgauging.com/category/agt-mult-width-gauge/)
- [AGT Width](https://www.advgauging.com/category/agt-width/)
- [Plastic Applications](https://www.advgauging.com/category/plastic-applications/)

## Tags

- [radiation](https://www.advgauging.com/tag/radiation-2/)
- [atom](https://www.advgauging.com/tag/atom/)
- [gamma](https://www.advgauging.com/tag/gamma/)
- [ionization](https://www.advgauging.com/tag/ionization/)
- [AM241](https://www.advgauging.com/tag/am241/)
- [American Metal Market](https://www.advgauging.com/tag/american-metal-market/)
- [Magazine](https://www.advgauging.com/tag/magazine/)
- [Award](https://www.advgauging.com/tag/award/)
- [AGT400](https://www.advgauging.com/tag/agt400/)
- [Laser](https://www.advgauging.com/tag/laser/)
- [Modern Metals](https://www.advgauging.com/tag/modern-metals/)
- [source](https://www.advgauging.com/tag/source/)
- [AGT800](https://www.advgauging.com/tag/agt800/)